3035698

https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Component terminal block, with integrated P1000M diode, connection method: Push-in connection, cross section: 0.5 mm² - 10 mm² , AWG: 20 - 10, width: 8.2 mm, color: gray Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356644860 Weight per Piece (excluding packing) 26.800 g Custom tariff number 85369010 Country of origin Poland Technical data General Note If several diode terminal blocks need adding to the DIN rail, a spacer plate must be placed between them. Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 6 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV 08/14/2019   Page 1 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Technical data General Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.31 W Designation Level 1+2 Maximum load current 5 A (with 10 mm² conductor cross section) Nominal current IN 5A Nominal voltage UN 1000 V Open side panel Yes Note regarding shock protection The maximum load current is determined by the diode. Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test conductor cross section/weight 0.5 mm² / 0.3 kg 2 6 mm / 1.4 kg 10 mm² / 2 kg Tensile test result Test passed Conductor cross section tensile test 0.5 mm² Tractive force setpoint 20 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Conductor cross section tensile test 10 mm² Tractive force setpoint 90 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N Result of voltage-drop test Test passed Result of thermal test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 08/14/2019   Page 2 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Technical data General Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 8.2 mm End cover width 2.2 mm Length 100.8 mm Height 60.1 mm Height NS 35/7,5 60 mm Height NS 35/15 67.5 mm 08/14/2019   Page 3 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Technical data Connection data Connection 1 level Connection method Push-in connection Stripping length 12 mm Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 10 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Internal cylindrical gage A5 Standards and Regulations Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141127 eCl@ss 8.0 27141127 08/14/2019   Page 4 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Classifications eCl@ss eCl@ss 9.0 27141127 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000902 ETIM 5.0 EC000903 ETIM 6.0 EC000903 ETIM 7.0 EC000903 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B C Nominal voltage UN 600 V 600 V Nominal current IN 10 A 10 A mm²/AWG/kcmil 20-8 20-8  13631 08/14/2019   Page 5 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 10 A 10 A mm²/AWG/kcmil 20-8 20-8 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 10 A 10 A mm²/AWG/kcmil 20-8 20-8 EAC  cULus Recognized   FILE E 60425  FILE E 60425     RU CDE.AI30.B.01102      Accessories Accessories Cover profile Cover profile - AP-ME METER - 3034361 Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m     08/14/2019   Page 6 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Covering hood - AH-ME - 3240265 Cover, for the contact- and dust-protected encapsulation of the components     Cover profile carrier Cover profile carrier - APH-ME - 3034374 Cover profile carrier, for mounting on NS 35/7,5 DIN rail, for fixing the AP-ME cover profile, can be sealed as an option     Cover profile carrier - APT-ME - 3034358 Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME     Crimping tool Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     08/14/2019   Page 7 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Crimping pliers - CRIMPFOX CENTRUS 6H - 1213146 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX 10S - 1212045 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry     Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Crimping pliers - CRIMPFOX 2,5-M - 1212719 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 2.5 mm², lateral entry, trapezoidal crimp     08/14/2019   Page 8 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Crimping pliers - CRIMPFOX 6-M - 1212720 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6 - 1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6T - 1212037 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6T-F - 1212038 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6S-F - 1212043 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp     08/14/2019   Page 9 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Crimping pliers - CRIMPFOX-M - 1212072 Basic pliers, for accommodating dies for a wide range of type of contacts     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     08/14/2019   Page 10 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     08/14/2019   Page 11 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     08/14/2019   Page 12 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Documentation 08/14/2019   Page 13 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Mounting material - PT-IL - 3208090 Operating decal for the push-in Technology     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-DTME 6 - 3034426 End cover, length: 99.8 mm, width: 2.2 mm, height: 49.6 mm, color: gray     08/14/2019   Page 14 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Jumper Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-8 - 3030297 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-8 - 3030307 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-8 - 3030310 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBS 10-8 - 3030323 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red     08/14/2019   Page 15 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Plug-in bridge - FBS 6-8 - 3032470 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: red     Plug-in bridge - FBS 1/3-8 - 3032363 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, pin assignment: 1,3, color: red     Plug-in bridge - FBS 1/4-8 - 3032376 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, pin assignment: 1, 4, color: red     Plug-in bridge - FBS 1/3/5-8 - 3032389 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, pin assignment: 1,3,5, color: red     Plug-in bridge - FBS 1/4/7/10-8 - 3032402 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, pin assignment: 1,4,7,10, color: red     08/14/2019   Page 16 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Plug-in bridge - FBSR 2-8 - 3033808 Plug-in bridge, pitch: 8.2 mm, width: 14.8 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-8 - 3001597 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-8 - 3000585 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-8 - 3033809 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-8 - 3001599 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red     08/14/2019   Page 17 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Plug-in bridge - FBSR 16-8 - 3033816 Plug-in bridge, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, color: red     Plug-in bridge - FBS 2-8 CT - 3033830 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange     Plug-in bridge - FBS 3-8 CT - 3033831 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange     Plug-in bridge - FBS 4-8 CT - 3033832 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange     Plug-in bridge - FBS 10-8 CT - 3033833 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange     08/14/2019   Page 18 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Plug-in bridge - FBS 2-8 CT - 3033830 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange     Plug-in bridge - FBS 3-8 CT - 3033831 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange     Plug-in bridge - FBS 4-8 CT - 3033832 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange     Plug-in bridge - FBS 10-8 CT - 3033833 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     08/14/2019   Page 19 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Plug-in bridge - FBS 3-8 BU - 3032570 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-8 BU - 3032583 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-8 BU - 3032596 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 6-8 BU - 3032677 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue     Plug-in bridge - FBS 10-8 BU - 3032606 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue     08/14/2019   Page 20 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Plug-in bridge - FBS 2-8 GY - 3032621 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: gray     Plug-in bridge - FBS 3-8 GY - 3032622 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: gray     Plug-in bridge - FBS 4-8 GY - 3032635 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: gray     Plug-in bridge - FBS 5-8 GY - 3032648 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: gray     Plug-in bridge - FBS 6-8 GY - 3032664 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: gray     08/14/2019   Page 21 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Plug-in bridge - FBS 10-8 GY - 3032651 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: gray     Labeled terminal marker Zack marker strip - ZB 8 CUS - 0825011 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Marker for terminal blocks - UC-TM 8 CUS - 0824597 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 8 CUS - 0829616 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     08/14/2019   Page 22 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Zack Marker strip, flat - ZBF 8 CUS - 0825030 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm     Zack Marker strip, flat - ZBF 8,LGS:FORTL.ZAHLEN - 0808804 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 101 ... 110, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm     Marker for terminal blocks - UC-TMF 8 CUS - 0824654 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm     08/14/2019   Page 23 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Marker for terminal blocks - UCT-TMF 8 CUS - 0829672 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm     Partition plate Spacer plate - DP-STMED 6 - 3035690 Spacer plate, length: 100.8 mm, width: 8.2 mm, color: gray     Partition plate - CARRIER 35-8 - 3034387 Partition plate, width: 8.2 mm, material: PA, length: 99.8 mm, With storage option for FBS...-8 and PAI 4-FIX, color: gray     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     08/14/2019   Page 24 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Screwdriver tools Screwdriver - SZF 2-0,8X4,0 - 1204520 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2component grip, with non-slip grip     Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Short-circuit connector Short-circuit connector - FBSRH 2-8 - 3033802 Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Short-circuit connector - FBSRH 3-8 - 3033803 Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     08/14/2019   Page 25 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Short-circuit connector - FBSRH 4-8 - 3033804 Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Terminal marking Zack marker strip - ZB 8:UNBEDRUCKT - 1052002 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Marker for terminal blocks - UC-TM 8 - 0818072 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 8 - 0828740 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm     08/14/2019   Page 26 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Marker for terminal blocks - UC-TMF 8 - 0818137 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 8 - 0828748 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm     Test plug terminal block Test plugs - PS-6 - 3030996 Test plugs, color: red     Test plugs - PS-6/2,3MM RD - 3038736 Test plugs, color: red     Test socket Test adapter - PAI-4-FIX BU - 3032729 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: blue     08/14/2019   Page 27 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Test adapter - PAI-4-FIX OG - 3034455 4 mm test adapter, for terminal blocks with 8.2 mm pitch     Test adapter - PAI-4-FIX YE - 3032745 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: yellow     Test adapter - PAI-4-FIX RD - 3032732 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: red     Test adapter - PAI-4-FIX GN - 3032758 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: green     Test adapter - PAI-4-FIX BK - 3032774 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: black     08/14/2019   Page 28 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Test adapter - PAI-4-FIX GY - 3032790 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: gray     Test adapter - PAI-4-FIX VT - 3032761 Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: violet     Test adapter - PAI-4-FIX BN - 3032787 Test adapter, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: brown     Test adapter - PAI-4-FIX WH - 3032797 4 mm test adapter, for terminal blocks with 8.2 mm pitch     Test adapter - PAIS-4-FIX GY - 3032791 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: gray     08/14/2019   Page 29 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Test adapter - PAIS-4-FIX BK - 3032792 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: black     Test adapter - PAIS-4-FIX RD - 3032793 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: red     Test adapter - PAIS-4-FIX BU - 3032798 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: blue     Test adapter - PAIS-4-FIX YE - 3032799 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: yellow     Test adapter - PAIS-4-FIX GN - 3032801 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: green     08/14/2019   Page 30 / 31 https://www.phoenixcontact.com/us/products/3035698 Component terminal block - PTME 6-DIO/R-L HV - 3035698 Accessories Test adapter - PAIS-4-FIX VT - 3032802 Test adapter, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: violet     Warning label printed Warning label - WS PT 6 - 1029029 Warning label, yellow/black, labeled: Lightning flash, mounting type: Plug in, for terminal block width: 8.2 mm     Necessary add-on products Spacer plate - DP-STMED 6 - 3035690 Spacer plate, length: 100.8 mm, width: 8.2 mm, color: gray     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/14/2019   Page 31 / 31