https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Multi-level terminal block, with diode1N4007, Connection method: Spring-cage connection, Cross section: 0.08
mm² - 4 mm², AWG: 28 - 12, Width: 5.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
The figure shows the standard item
without diode
Why buy this product
Can be labeled on every level
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
3
Number of connections
6
Potentials
3
Nominal cross section
2.5 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
09/08/2016 Page 1 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Technical data
General
Maximum load current
28 A (with 4 mm² conductor cross section)
Nominal current IN
20 A
Nominal voltage UN
500 V
Open side panel
Yes
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
5.2 mm
End cover width
2.2 mm
Length
99.5 mm
Height NS 35/7,5
58 mm
Height NS 35/15
65.5 mm
Connection data
Connection method
Spring-cage connection
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
28
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
28
Max. AWG conductor cross section, flexible
14
09/08/2016 Page 2 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Technical data
Connection data
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, max.
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A3
Standards and Regulations
Flammability rating according to UL 94
V0
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141128
eCl@ss 4.1
27141128
eCl@ss 5.0
27141128
eCl@ss 5.1
27141128
eCl@ss 6.0
27141128
eCl@ss 7.0
27141128
eCl@ss 8.0
27141127
eCl@ss 9.0
27141127
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000903
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
09/08/2016 Page 3 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Classifications
UNSPSC
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
09/08/2016 Page 4 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
Documentation
09/08/2016 Page 5 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
End cover
End cover - D-ST 2,5-3L - 3036660
End cover, Length: 99.5 mm, Width: 2.2 mm, Height: 50.3 mm, Color: gray
Insulating sleeve
Insulating sleeve - ISH 2,5/0,2 - 3002843
Insulating sleeve, Color: white
Insulating sleeve - ISH 2,5/0,5 - 3002856
Insulating sleeve, Color: gray
Insulating sleeve - ISH 2,5/1,0 - 3002869
Insulating sleeve, Color: black
09/08/2016 Page 6 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Jumper
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 9 mm, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 14.2 mm, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 19.4 mm, Number of positions: 4, Color: red
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 24.6 mm, Number of positions: 5, Color: red
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 50.6 mm, Number of positions: 10, Color: red
09/08/2016 Page 7 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 20, Color: red
Plug-in bridge - FBS 50-5 - 3038930
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 50, Color: red
Plug-in bridge - FBSR 2-5 - 3033702
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 2, Color: red
Plug-in bridge - FBSR 3-5 - 3001591
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 3, Color: red
Plug-in bridge - FBSR 4-5 - 3001592
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 4, Color: red
09/08/2016 Page 8 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Plug-in bridge - FBSR 5-5 - 3001593
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 5, Color: red
Plug-in bridge - FBSR 10-5 - 3033710
Plug-in bridge, Pitch: 5.2 mm, Number of positions: 10, Color: red
Labeled terminal marker
Warning cover - WST 2,5 - 3030941
Warning cover, 5-pos., for terminal width: 5.2 mm
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 500, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm
09/08/2016 Page 9 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100,
Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm
Marker carriers
09/08/2016 Page 10 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Marker carriers - STP 5-3 - 0810562
Triple marker carriers, snaps onto the three-level spring-cage terminal block ST 2,5-3L, labeled with ZB 5 or ZBF
Partition plate
Spacer plate - DP PS-5 - 3036725
Spacer plate, Length: 22.4 mm, Width: 5.2 mm, Height: 29 mm, Number of positions: 1, Color: red
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Screwdriver - ST-BW - 1207608
Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
Terminal marking
09/08/2016 Page 11 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove,
for terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal
block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm
Test plug terminal block
Test plugs - PS-5 - 3030983
Test plugs, Color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, Color: red
09/08/2016 Page 12 / 13
https://www.phoenixcontact.com/us/products/3036043
Multi-level terminal block - ST 2,5-3L-DIO/M-O - 3036043
Accessories
Test socket
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/08/2016 Page 13 / 13
