3036181

https://www.phoenixcontact.com/us/products/3036181 Feed-through terminal block - ST 35 BU - 3036181 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, Connection method: Spring-cage connection, Cross section: 2.5 mm² - 35 mm², AWG: 14 - 2, Width: 16 mm, Color: blue, Mounting type: NS 35/7,5, NS 35/15 Product Features ■ ■ The flexible options for reducing bridging in the CLIPLINE complete system can be found in "Accessories for the CLIPLINE complete modular terminal block system" The double bridge shaft not only enables individual chain bridging, but also reducing bridging to spring-cage terminal blocks with smaller cross sections Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 87.33 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Nominal cross section 35 mm² Color blue Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I 04/05/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/3036181 Feed-through terminal block - ST 35 BU - 3036181 Technical data General Connection in acc. with standard IEC 60947-7-1 Maximum load current 125 A (with 35 mm² conductor cross section) Nominal current IN 125 A Nominal voltage UN 1000 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 2.5 mm² / 0.7 kg 35 mm² / 6.8 kg Tensile test result Test passed Conductor cross section tensile test 2.5 mm² Tractive force setpoint 50 N Conductor cross section tensile test 35 mm² Tractive force setpoint 190 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 10 N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 35 mm² Short-time current 4.2 kA Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed 04/05/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/3036181 Feed-through terminal block - ST 35 BU - 3036181 Technical data General Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Dimensions Width 16 mm Length 100 mm Height NS 35/7,5 59 mm Height NS 35/15 66.5 mm Connection data Connection method Spring-cage connection Connection in acc. with standard IEC 60947-7-1 Note The supply from the ST 35 terminal block to the ST 16 TWIN terminal block with the RB-ST 35 reducing bridge is single-sided only. In the case of a central supply, the D-ST 16-TWIN cover cannot be bridged via the reducing bridge. Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG min. 14 Conductor cross section AWG max. 2 Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 35 mm² Min. AWG conductor cross section, flexible 14 Max. AWG conductor cross section, flexible 2 04/05/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/3036181 Feed-through terminal block - ST 35 BU - 3036181 Technical data Connection data Conductor cross section flexible, with ferrule without plastic sleeve min. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 10 mm² sleeve, max. Connection in acc. with standard IEC/EN 60079‑7 Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG min. 14 Conductor cross section AWG max. 2 Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 35 mm² Stripping length 25 mm Internal cylindrical gage A8 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 04/05/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/3036181 Feed-through terminal block - ST 35 BU - 3036181 Classifications ETIM ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / LR / GL / BV / KR / NK / IECEE CB Scheme / EAC / EAC / cULus Recognized Ex Approvals IECEx / ATEX / EAC Ex Approvals submitted Approval details CSA    B C mm²/AWG/kcmil 14-2 14-2 Nominal current IN 115 A 115 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 14-2 14-2 UL Recognized  04/05/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/3036181 Feed-through terminal block - ST 35 BU - 3036181 Approvals   B C Nominal current IN 115 A 115 A Nominal voltage UN 600 V 600 V VDE Gutachten mit Fertigungsüberwachung      mm²/AWG/kcmil 2.5-35 Nominal current IN 125 A Nominal voltage UN 1000 V cUL Recognized    B C mm²/AWG/kcmil 14-2 14-2 Nominal current IN 115 A 115 A Nominal voltage UN 600 V 600 V LR  GL  BV  KR  NK  IECEE CB Scheme      mm²/AWG/kcmil 35 Nominal voltage UN 1000 V EAC  04/05/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/3036181 Feed-through terminal block - ST 35 BU - 3036181 Approvals EAC  cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/05/2016   Page 7 / 7