3036518

Spring Cage Component Terminal Blocks on l in ec om po ne nt s. co m Thanks to the different versions of double-level diode and light indicator terminal blocks, it is possible to carry out a great variety of switching tasks: In a minimum of space the following circuits can be realized: – damping diode, – lamp test, – message and fault message. Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com Spring Cage Component Terminal Block with Diode ST 2,5-DIO/L-R ST 2,5-DIO/R-L (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] 1) 500 IEC 60 947-7-1 0.2-4 0.2-2.5 24-12 Integrated: Diode 1N 4007 Reverse voltage: 1300 V Maximum continuous current: 1 A 1) The max. current is determined by the diode. 2) Further colors on request. Technical data Type Order No. Pcs. Pkt. ST 2,5-DIO/L-R 30 36 26 2 50 Spring cage terminal block, with integrated diode 1N 4007, conducting direction from right terminal width 5.2 to left, for mounting on 3 ST 2,5-DIO/R-L 30 36 51 8 50 (1) End cover D-ST 2,5 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. 10 10 10 10 10 10 30 30 72 1 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 WST 2,5 30 30 94 1 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 ZB 5:UNPRINTED 10 50 00 4 10 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A nt om (6) 2.3 mm ∅ test connector 2), consisting of metal part and red insulating sleeve (7) Reducing plug in ec (8) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks (9) Screwdriver, for actuating the tension spring (10) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves on l 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 ATP-ST 4 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft (11) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges 50 50 50 ne (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick white white Dimensions Width / length / end cover width Height (NS 35:7.5 / NS 35:15) Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section Rated surge voltage / contamination class Surge voltage category / insulation material group Capacity connection Stranded with ferrule with plastic sleeve Stranded with ferrule without plastic sleeve Stranded with TWIN ferrule with plastic sleeve Stripping length Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 50 30 02 84 3 30 02 85 6 30 02 86 9 po (3) Plug-in bridge, for cross-connections in the terminal center ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 co (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 gray 0.25-0.5 mm2 0.75-1 mm2 black 30 30 41 7 s. gray m Spring cage terminal block, with integrated diode 1N 4007, conducting direction from left terminal width 5.2 to right, for mounting on 3 [mm] [mm] [A] / [mm2] [kV] / – –/– [mm2] [mm2] [mm2] [mm] PHOENIX CONTACT page 2 of 9 5.2 / 48.5 / 2.2 36.5 / 44 1) /4 8/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 Spring Cage Component Terminal Block with Diode ST 2,5-TWIN-DIO/L-R ST 2,5-TWIN-DIO/R-L (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] 1) 500 IEC 60 947-7-1 0.2-4 0.2-2.5 24-12 Integrated: Diode 1N 4007 Reverse voltage: 1300 V Maximum continuous current: 1 A 1) The max. current is determined by the diode. 2) Further colors on request. Technical data Type Order No. Pcs. Pkt. ST 2,5-TWIN-DIO/L-R 30 36 24 6 50 Spring cage terminal block, with integrated diode 1N 4007, conducting direction from right terminal width 5.2 to left, for mounting on 3 ST 2,5-TWIN-DIO/R-L 30 36 52 1 50 (1) End cover D-ST 2,5-TWIN (2) Segment cover, for covering of multiconductor terminals when two-conductor gray terminals are connected in series (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft in ec (7) 2.3 mm ∅ test connector 2), consisting of metal part and red insulating sleeve (8) Reducing plug (9) Screwdriver, for actuating the tension spring on l (10) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves (11) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges white white Dimensions Width / length / end cover width Height (NS 35:7.5 / NS 35:15) Technical data in accordance with IEC/DIN VDE Maximum load current/ cross section Rated surge voltage / contamination class Surge voltage category / insulation material group Capacity connection Stranded with ferrule with plastic sleeve Stranded with ferrule without plastic sleeve Stranded with TWIN ferrule with plastic sleeve Stripping length Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 ATP 4-TWIN 30 30 78 9 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 ZB 5:UNPRINTED 10 50 00 4 10 nt FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 om (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick 30 02 84 3 30 02 85 6 30 02 86 9 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 ne 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. 10 po (4) Plug-in bridge, for cross-connections in the terminal center 50 30 36 60 2 s. DS-ST 2,5 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 0.25-0.5 mm2 gray 2 black 0.75-1 mm 30 30 48 8 co gray m Spring cage terminal block, with integrated diode 1N 4007, conducting direction from left terminal width 5.2 to right, for mounting on 3 [mm] [mm] [A] / [mm2] [kV] / – –/– [mm2] [mm2] [mm2] [mm] PHOENIX CONTACT page 3 of 9 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A 5.2 / 60.5 / 2.2 36.5 / 44 1) /4 8/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 Spring Cage Component Terminal Block with Diode ST 2,5-QUATTRO-DIO/L-R ST 2,5-QUATTRO-DIO/R-L (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] 1) 500 IEC 60 947-7-1 0.2-4 0.2-2.5 24-12 Integrated: Diode 1N 4007 Reverse voltage: 1300 V Maximum continuous current: 1 A 1) The max. current is determined by the diode. 2) Further colors on request. Technical data Type Order No. Pcs. Pkt. ST 2,5-QUATTRO-DIO/L-R 30 36 23 3 50 Spring cage terminal block, with integrated diode 1N 4007, conducting direction from right terminal width 5.2 to left, for mounting on 3 ST 2,5-QUATTRO-DIO/R-L 30 36 53 4 50 (1) End cover D-ST 2,5-QUATTRO (2) Segment cover, for covering of multiconductor terminals when two-conductor gray terminals are connected in series (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft in ec (7) 2.3 mm ∅ test connector 2), consisting of metal part and red insulating sleeve (8) Reducing plug (9) Screwdriver, for actuating the tension spring on l (10) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves (11) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges white white Dimensions Width / length / end cover width Height (NS 35:7.5 / NS 35:15) Technical data in accordance with IEC/DIN VDE Maximum load current/ cross section Rated surge voltage / contamination class Surge voltage category / insulation material group Capacity connection Stranded with ferrule with plastic sleeve Stranded with ferrule without plastic sleeve Stranded with TWIN ferrule with plastic sleeve Stripping length Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 ATP 4-QUATTRO 30 30 81 5 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 ZB 5:UNPRINTED 10 50 00 4 10 nt FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 om (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick 30 02 84 3 30 02 85 6 30 02 86 9 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 ne 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. 10 po (4) Plug-in bridge, for cross-connections in the terminal center 50 30 36 60 2 s. DS-ST 2,5 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 0.25-0.5 mm2 gray 2 black 0.75-1 mm 30 30 51 4 co gray m Spring cage terminal block, with integrated diode 1N 4007, conducting direction from left terminal width 5.2 to right, for mounting on 3 [mm] [mm] [A] / [mm2] [kV] / – –/– [mm2] [mm2] [mm2] [mm] PHOENIX CONTACT page 4 of 9 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A 5.2 / 72 / 2.2 36.5 / 44 1) /4 8/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 Spring Cage Component Terminal Block with Diode STTB 2,5-DIO/O-U STTB 2,5-DIO/U-O (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 26 500 Integrated: Diode 1N 4007 Reverse voltage: 1300 V Maximum continuous current: 1 A u Technical data Type Order No. Pcs. Pkt. STTB 2,5-DIO/O-U 30 31 55 5 50 Spring cage terminal block, with integrated diode 1N 4007, conducting direction from bottom terminal width 5.2 to top, for mounting on 3 STTB 2,5-DIO/U-O 30 31 56 3 50 (1) End cover D-STTB 2,5 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.2 mm2 white gray 0.25-0.5 mm2 0.75-1 mm2 black 50 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 30 30 74 7 50 PAI 4 30 30 92 5 10 (6) Double marker carrier, snaps into double level spring cage terminal blocks, STTB 2,5 / 4, labeling with ZB 5 and ZBFM 5 STP 5-2 08 00 96 7 10 (7) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks WST 2,5 30 30 94 1 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. in ec om po ATP-STTB 4 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft (8) Screwdriver, for actuating the tension spring white on l (9) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves Imax.: 20 A 20 A 20 A 20 A 20 A 20 A nt ne (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 s. 30 02 84 3 30 02 85 6 30 02 86 9 (3) Plug-in bridge, for cross-connections in the terminal center ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 30 45 9 co gray m Spring cage terminal block, with integrated diode 1N 4007, conducting direction from top terminal width 5.2 to bottom, for mounting on 3 Dimensions Width / length / end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG PHOENIX CONTACT page 5 of 9 5.2 / 67.5 / 2.2 47.5 / 55 26 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 300 / 20 / 26 - 12 300 / 20 / 26 - 12 Spring Cage Component Terminal Block with Diode STTB 2,5-DIO/UL-UR (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 26 500 Integrated: Diode 1N 4007 Reverse voltage: 1300 V Maximum continuous current: 1 A u Technical data Type Order No. Pcs. Pkt. STTB 2,5-DIO/UL-UR 30 31 57 1 50 (1) End cover D-STTB 2,5 30 30 45 9 50 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. in ec 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 30 30 74 7 50 PAI 4 30 30 92 5 10 STP 5-2 08 00 96 7 10 WST 2,5 30 30 94 1 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 Imax.: 20 A 20 A 20 A 20 A 20 A 20 A ne po om (6) Double marker carrier, snaps into double level spring cage terminal blocks, STTB 2,5 / 4, labeling with ZB 5 and ZBFM 5 (9) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves 50 50 50 ATP-STTB 4 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft (8) Screwdriver, for actuating the tension spring 30 02 84 3 30 02 85 6 30 02 86 9 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick (7) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal block ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 nt (3) Plug-in bridge, for cross-connections in the terminal center co (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 gray 0.25-0.5 mm2 2 black 0.75-1 mm s. gray m Spring cage terminal block, with integrated diode 1N 4007, conducting direction from left terminal width 5.2 to right, for mounting on 3 white on l Dimensions Width / length / end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG PHOENIX CONTACT page 6 of 9 5.2 / 67.5 / 2.2 47.5 / 55 26 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 300 / 20 / 26 - 12 300 / 20 / 26 - 12 Spring Cage Component Terminal Block with Diodes STTB 2,5-2 DIO/O-UL/UR-UL STTB 2,5-2 DIO/O-UL/O-UR (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 26 500 Integrated: Diode 1N 4007 Reverse voltage: 1300 V Maximum continuous current: 1 A u Technical data Type Order No. Pcs. Pkt. 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (7) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks (8) Screwdriver, for actuating the tension spring on l 50 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 ATP-STTB 4 30 30 74 7 50 PAI 4 30 30 92 5 10 STP 5-2 08 00 96 7 10 WST 2,5 30 30 94 1 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 ne in ec (6) Double marker carrier, snaps into double level spring cage terminal blocks, STTB 2,5 / 4, labeling with ZB 5 and ZBFM 5 (9) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves 30 30 45 9 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 om (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft 50 Imax.: 20 A 20 A 20 A 20 A 20 A 20 A po (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick 30 31 59 7 D-STTB 2,5 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 gray 0.25-0.5 mm2 black 0.75-1 mm2 (3) Plug-in bridge, for cross-connections in the terminal center STTB 2,5-2 DIO/O-UL/O-UR s. gray 50 nt (1) End cover 30 31 58 4 m Spring cage terminal block, with two integrated diodes 1N 4007, conducting direction from terminal width 5.2 top to bottom left, and from top to bottom right, for mounting on 3 STTB 2,5-2 DIO/O-UL/UR-UL co Spring cage terminal block, with two integrated diodes 1N 4007, conducting direction from terminal width 5.2 top to bottom left, and from bottom right to bottom left, for mounting on 3 white Dimensions Width / length / end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG PHOENIX CONTACT page 7 of 9 5.2 / 67.5 / 2.2 47.5 / 55 26 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 300 / 20 / 26 - 12 300 / 20 / 26 - 12 Spring Cage Component Terminal Block with Light Indicator STTB 2,5-LA (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.2-4 0.2-2.5 24-12 26 500 u Technical data Type Order No. Pcs. Pkt. STTB 2,5-LA 24 STTB 2,5-LA 60 STTB 2,5-LA 230 (1) End cover D-STTB 2,5 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.2 mm2 gray 0.25-0.5 mm2 2 black 0.75-1 mm 50 50 50 50 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 10 10 10 10 10 10 30 30 74 7 50 PAI 4 30 30 92 5 10 (6) Double marker carrier, snaps into double level spring cage terminal blocks, STTB 2,5 / 4, labeling with ZB 5 and ZBFM 5 STP 5-2 08 00 96 7 10 (7) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks WST 2,5 30 30 94 1 10 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBFM 5 /WH:UNPRINTED 08 03 59 5 10 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. in ec om po ATP-STTB 4 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft (8) Screwdriver, for actuating the tension spring white on l (9) Zack marker sheet, flat, 120-section, for labeling the outer marker grooves Imax.: 20 A 20 A 20 A 20 A 20 A 20 A nt ne (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 s. 30 02 84 3 30 02 85 6 30 02 86 9 (3) Plug-in bridge, for cross-connections in the terminal center ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 30 45 9 co gray 30 31 60 7 30 31 61 0 30 31 62 3 m Spring cage terminal block, with light indicator for mounting on 3, terminal width 5.2 voltage [V AC/DC]/current [mA] 15 - 30 DC / 2.5 - 7.5 30 - 60 DC / 1.9 - 4.0 110 - 230 AC/DC / 2.5 - 7.5 Dimensions Width / length / end cover width [mm] Height (NS 35:7.5 / NS 35:15) [mm] Technical data in accordance with IEC/DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG PHOENIX CONTACT page 8 of 9 5.2 / 67.5 / 2.2 47.5 / 55 26 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 300 / 20 / 26 - 12 300 / 20 / 26 - 12 Technical data STTB 2,5-DIO/O-U ST 2,5-TWIN-DIO/L-R STTB 2,5-DIO/U-O s. co m ST 2,5-DIO/L-R ST 2,5-QUATTRO-DIO/L-R po ne nt STTB 2,5-DIO/UL-UR STTB 2,5-2 DIO/O-UL/UR-UL STTB 2,5-2 DIO/O-UL/O-UR on l ST 2,5-TWIN-DIO/R-L STTB 2,5-LA... ST 2,5-QUATTRO-DIO/R-L Phoenix Contact page 9 of 9  PHOENIX CONTACT 15.10.02 TNR: 5124936-02 http://www.phoenixcontact.com in ec om ST 2,5-DIO/R-L