3037287

https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Spring-cage connection, number of connections: 3, cross section: 0.08 mm² - 1.5 mm², AWG: 28 - 16, width: 4.2 mm, color: green, mounting type: NS 35/7,5, NS 35/15 Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918599683 Weight per Piece (excluding packing) 6.570 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 3 Potentials 1 Nominal cross section 1.5 mm² Color green Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Overvoltage category III Insulating material group I 08/01/2019   Page 1 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Technical data General Maximum power dissipation for nominal condition 0.56 W Designation Level 1 above 1 below 1 Maximum load current 17.5 A (in case of a 1.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) Nominal current IN 17.5 A (with 1.5 mm² conductor cross section) Nominal voltage UN 500 V Open side panel Yes Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 4.2 mm Length 60.5 mm Height NS 35/7,5 36.5 mm Height NS 35/15 44 mm Connection data Connection method Spring-cage connection Stripping length 8 mm ... 10 mm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 08/01/2019   Page 2 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Technical data Connection data Conductor cross section flexible min. 0.08 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 28 Max. AWG conductor cross section, flexible 16 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Connection in acc. with standard IEC/EN 60079-7 Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 Conductor cross section flexible min. 0.08 mm² Conductor cross section flexible max. 1.5 mm² Internal cylindrical gage A1 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141100 08/01/2019   Page 3 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Classifications eCl@ss eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals DNV GL / CSA / BV / LR / NK / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / RS / cULus Recognized Ex Approvals IECEx / ATEX / EAC Ex Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAE00001CS 08/01/2019   Page 4 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Approvals CSA    http://www.csagroup.org/services-industries/product-listing/   B C Nominal voltage UN 300 V 300 V Nominal current IN 15 A 15 A mm²/AWG/kcmil 26-14 26-14  13631   http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  13403/B0 BV LR    http://www.lr.org/en  04/20034 NK    http://www.classnk.or.jp/hp/en/  09 ME 140 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425 BV    B C Nominal voltage UN 300 V 300 V Nominal current IN 15 A 15 A mm²/AWG/kcmil 26-14 26-14 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 300 V 300 V Nominal current IN 15 A 15 A mm²/AWG/kcmil 26-14 26-14  FILE E 60425 08/01/2019   Page 5 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Approvals IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 500 V mm²/AWG/kcmil 1.5 VDE Gutachten mit Fertigungsüberwachung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 500 V Nominal current IN 17.5 A mm²/AWG/kcmil 1.5  DE1-51360  40009031     RU CDE.A*30.B.01742 RS    http://www.rs-head.spb.ru/en/index.php  17.00013.272 cULus Recognized       EAC  Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     08/01/2019   Page 6 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     08/01/2019   Page 7 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     08/01/2019   Page 8 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     08/01/2019   Page 9 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Documentation Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     08/01/2019   Page 10 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-ST 2,5-TWIN - 3030488 End cover, length: 60.5 mm, width: 2.2 mm, height: 29 mm, color: gray     08/01/2019   Page 11 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Cover segment - DS-ST 2,5 - 3036602 End cover segments, large segment: 32.25 x 13.83 x 0.9, small segment: 22.65 x 11.65 x 0.9, color: gray     End cover - D-ST 2,5-TWIN-0,8 OG - 3030512 End cover, length: 60.5 mm, width: 0.8 mm, height: 29 mm, color: orange     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     08/01/2019   Page 12 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Insulating sleeve - ISH 1,5/0,2 - 3206131 Insulating sleeve, color: white     08/01/2019   Page 13 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Insulating sleeve - ISH 1,5/0,5 - 3031034 Insulating sleeve, color: gray     Jumper Plug-in bridge - FBS 2-4 - 3030116 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-4 - 3030129 Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-4 - 3030132 Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-4 - 3030145 Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: red     08/01/2019   Page 14 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Plug-in bridge - FBS 10-4 - 3030158 Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-4 - 3030352 Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: red     Plug-in bridge - FBS 2-4 BU - 3030117 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-4 BU - 3030130 Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-4 BU - 3030133 Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: blue     08/01/2019   Page 15 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Plug-in bridge - FBS 5-4 BU - 3030146 Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-4 BU - 3036851 Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-4 BU - 3030353 Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 2-4 GY - 3030118 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: gray     Plug-in bridge - FBS 3-4 GY - 3030131 Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: gray     08/01/2019   Page 16 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Plug-in bridge - FBS 4-4 GY - 3030134 Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: gray     Plug-in bridge - FBS 5-4 GY - 3030147 Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: gray     Labeled terminal marker Zack marker strip - ZB 4 CUS - 0824951 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm     Zack marker strip - ZB 4,LGS:FORTL.ZAHLEN - 0805739     Zack marker strip - ZB 4,QR:FORTL.ZAHLEN - 0805807 Zack marker strip, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm     08/01/2019   Page 17 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Marker for terminal blocks - UC-TM 4 CUS - 0824573 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 4 CUS - 0829588 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm     Zack Marker strip, flat - ZBF 4 CUS - 0825023 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 5.2 mm     Zack Marker strip, flat - ZBF 4,LGS:FORTL.ZAHLEN - 0808626 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm     Zack Marker strip, flat - ZBF 4,QR:FORTL.ZAHLEN - 0808820 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm     08/01/2019   Page 18 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Zack Marker strip, flat - ZBF 4,LGS:GERADE ZAHLEN - 0810818 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm     Zack Marker strip, flat - ZBF 4,LGS:UNGERADE ZAHLEN - 0810850 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm     Marker for terminal blocks - UC-TMF 4 CUS - 0824630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 4 CUS - 0829651 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.4 x 4.7 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     08/01/2019   Page 19 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate Partition plate - ATP-ST-TWIN - 3030789 Partition plate, length: 75.2 mm, width: 2 mm, height: 39 mm, color: gray     Spacer plate - DP PS-4 - 3036712 Spacer plate, length: 22.4 mm, width: 4.2 mm, height: 29 mm, number of positions: 1, color: red     Screwdriver tools Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip     Terminal marking 08/01/2019   Page 20 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Zack marker strip - ZB 4 :UNBEDRUCKT - 0805001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm     Marker for terminal blocks - UC-TM 4 - 0818111 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 4 - 0828732 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm     Zack Marker strip, flat - ZBF 4:UNBEDRUCKT - 0808587 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm     Marker for terminal blocks - UC-TMF 4 - 0818166 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 5.1 mm     08/01/2019   Page 21 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Marker for terminal blocks - UCT-TMF 4 - 0828742 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.4 x 4.7 mm     Test plug terminal block Reducing plug - RPS - 0201647 Reducing plug, color: gray     Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Test plugs - PS-4 - 3030970 Test plugs, color: red     Test socket Test adapter - PAI-4 - 3030925 Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: gray     08/01/2019   Page 22 / 23 https://www.phoenixcontact.com/us/products/3037287 Feed-through terminal block - ST 1,5-TWIN GN - 3037287 Accessories Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/01/2019   Page 23 / 23