https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Spring-cage
connection, number of connections: 3, cross section: 0.08 mm² - 1.5 mm², AWG: 28 - 16, width: 4.2 mm, color:
black, mounting type: NS 35/7,5, NS 35/15
Your advantages
The consistent double function shaft offers every opportunity for time-saving potential distribution and accommodating test accessories
User-friendly implementation of all potential branching tasks
Space-saving and practical multi-conductor connection without additional bridges
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918599676
Weight per Piece (excluding packing)
6.560 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
1
Number of connections
3
Potentials
1
Nominal cross section
1.5 mm²
Color
black
Insulating material
PA
11/06/2019 Page 1 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Technical data
General
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.56 W
Designation
Level 1 above 1+2 below 1
Maximum load current
17.5 A (in case of a 1.5 mm² conductor cross section, the maximum
load current must not be exceeded by the total current of all connected
conductors.)
Nominal current IN
17.5 A (with 1.5 mm² conductor cross section)
Nominal voltage UN
500 V
Open side panel
Yes
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
4.2 mm
End cover width
2.2 mm
Length
60.5 mm
Height NS 35/7,5
36.5 mm
Height NS 35/15
44 mm
Connection data
Connection
1 level
11/06/2019 Page 2 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Technical data
Connection data
Connection method
Spring-cage connection
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
28
Conductor cross section AWG max.
16
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
28
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, max.
Connection in acc. with standard
IEC/EN 60079-7
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
28
Conductor cross section AWG max.
16
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
1.5 mm²
Internal cylindrical gage
A1
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
11/06/2019 Page 3 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
11/06/2019 Page 4 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Approvals
Approvals
DNV GL / CSA / BV / LR / KR / NK / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / RS /
cULus Recognized
Ex Approvals
IECEx / ATEX / EAC Ex
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAE00001CS
CSA
http://www.csagroup.org/services-industries/product-listing/
13631
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
15 A
15 A
mm²/AWG/kcmil
26-14
26-14
http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials
13403/D0 BV
LR
http://www.lr.org/en
04/20034
KR
http://www.krs.co.kr/eng/main/main.aspx
HMB17372-EL002
NK
http://www.classnk.or.jp/hp/en/
09 ME 140
BV
11/06/2019 Page 5 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Approvals
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
15 A
15 A
mm²/AWG/kcmil
26-14
26-14
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
15 A
15 A
mm²/AWG/kcmil
26-14
26-14
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
500 V
mm²/AWG/kcmil
1.5
VDE Gutachten mit
Fertigungsüberwachung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal voltage UN
500 V
Nominal current IN
17.5 A
mm²/AWG/kcmil
1.5
EAC
RS
FILE E 60425
FILE E 60425
DE1-51360
40009031
RU CDE.A*30.B.01742
http://www.rs-head.spb.ru/en/index.php
17.00013.272
11/06/2019 Page 6 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Approvals
cULus Recognized
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
11/06/2019 Page 7 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
11/06/2019 Page 8 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
11/06/2019 Page 9 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Documentation
11/06/2019 Page 10 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
11/06/2019 Page 11 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-ST 2,5-TWIN - 3030488
End cover, length: 60.5 mm, width: 2.2 mm, height: 29 mm, color: gray
Cover segment - DS-ST 2,5 - 3036602
End cover segments, large segment: 32.25 x 13.83 x 0.9, small segment: 22.65 x 11.65 x 0.9, color: gray
End cover - D-ST 2,5-TWIN-0,8 OG - 3030512
End cover, length: 60.5 mm, width: 0.8 mm, height: 29 mm, color: orange
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
11/06/2019 Page 12 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
11/06/2019 Page 13 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Insulating sleeve - ISH 1,5/0,2 - 3206131
Insulating sleeve, color: white
Insulating sleeve - ISH 1,5/0,5 - 3031034
Insulating sleeve, color: gray
Jumper
Plug-in bridge - FBS 2-4 - 3030116
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-4 - 3030129
Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: red
11/06/2019 Page 14 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Plug-in bridge - FBS 4-4 - 3030132
Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-4 - 3030145
Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: red
Plug-in bridge - FBS 10-4 - 3030158
Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-4 - 3030352
Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: red
Plug-in bridge - FBS 2-4 BU - 3030117
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: blue
11/06/2019 Page 15 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Plug-in bridge - FBS 3-4 BU - 3030130
Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-4 BU - 3030133
Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-4 BU - 3030146
Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-4 BU - 3036851
Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-4 BU - 3030353
Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: blue
11/06/2019 Page 16 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Plug-in bridge - FBS 2-4 GY - 3030118
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: gray
Plug-in bridge - FBS 3-4 GY - 3030131
Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: gray
Plug-in bridge - FBS 4-4 GY - 3030134
Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: gray
Plug-in bridge - FBS 5-4 GY - 3030147
Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: gray
Labeled terminal marker
Zack marker strip - ZB 4 CUS - 0824951
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm, Number of individual labels: 10
11/06/2019 Page 17 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Zack marker strip - ZB 4,LGS:FORTL.ZAHLEN - 0805739
Zack marker strip - ZB 4,QR:FORTL.ZAHLEN - 0805807
Zack marker strip, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100,
mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm, Number
of individual labels: 10
Marker for terminal blocks - UC-TM 4 CUS - 0824573
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm, Number of individual
labels: 120
Marker for terminal blocks - UCT-TM 4 CUS - 0829588
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm, Number of individual
labels: 84
Zack Marker strip, flat - ZBF 4 CUS - 0825023
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 5.2 mm, Number of individual labels: 10
11/06/2019 Page 18 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Zack Marker strip, flat - ZBF 4,LGS:FORTL.ZAHLEN - 0808626
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 4,QR:FORTL.ZAHLEN - 0808820
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 4,LGS:GERADE ZAHLEN - 0810818
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 4,LGS:UNGERADE ZAHLEN - 0810850
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm, Number
of individual labels: 10
Marker for terminal blocks - UC-TMF 4 CUS - 0824630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 5.1 mm, Number of individual
labels: 120
11/06/2019 Page 19 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Marker for terminal blocks - UCT-TMF 4 CUS - 0829651
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.4 x 4.7 mm, Number of individual
labels: 90
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Partition plate - ATP-ST-TWIN - 3030789
Partition plate, length: 75.2 mm, width: 2 mm, height: 39 mm, color: gray
Spacer plate - DP PS-4 - 3036712
Spacer plate, length: 22.4 mm, width: 4.2 mm, height: 29 mm, number of positions: 1, color: red
11/06/2019 Page 20 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Screwdriver tools
Screwdriver - SZF 0-0,4X2,5 - 1204504
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 4 :UNBEDRUCKT - 0805001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 4 - 0818111
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 4.2 mm, lettering field size: 3.6 x 10.5 mm, Number of individual labels: 120
Marker for terminal blocks - UCT-TM 4 - 0828732
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size:
3.6 x 10.5 mm, Number of individual labels: 84
11/06/2019 Page 21 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Zack Marker strip, flat - ZBF 4:UNBEDRUCKT - 0808587
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TMF 4 - 0818166
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 4.2 mm, lettering field size: 3.6 x 5.1 mm, Number of individual labels: 120
Marker for terminal blocks - UCT-TMF 4 - 0828742
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size:
3.4 x 4.7 mm, Number of individual labels: 90
Test plug terminal block
Reducing plug - RPS - 0201647
Reducing plug, color: gray
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
11/06/2019 Page 22 / 23
https://www.phoenixcontact.com/us/products/3037300
Feed-through terminal block - ST 1,5-TWIN BK - 3037300
Accessories
Test plugs - PS-4 - 3030970
Test plugs, color: red
Test socket
Test adapter - PAI-4 - 3030925
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: gray
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/06/2019 Page 23 / 23
