https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Spring-cage
connection, number of connections: 4, cross section: 0.08 mm² - 4 mm², AWG: 28 - 12, width: 5.2 mm, color: red,
mounting type: NS 35/7,5, NS 35/15
Your advantages
Ground terminal blocks of the same shape are available
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918812447
Weight per Piece (excluding packing)
8.610 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
1
Number of connections
4
Potentials
1
Nominal cross section
2.5 mm²
Color
red
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
08/24/2020 Page 1 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Technical data
General
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W
Maximum load current
28 A (in case of a 4 mm² conductor cross section, the maximum load
current must not be exceeded by the total current of all connected
conductors.)
Nominal current IN
24 A (with 4 mm² conductor cross section)
Nominal voltage UN
800 V
Open side panel
Yes
Ambient temperature (operation)
-60 °C ... 85 °C
Ambient temperature (storage/transport)
-25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Dimensions
Width
5.2 mm
End cover width
2.2 mm
Length
50.8 mm
Height NS 35/7,5
43 mm
Height NS 35/15
50.5 mm
Connection data
Connection
1 level
Connection method
Spring-cage connection
Stripping length
10 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
28
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
28
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
08/24/2020 Page 2 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Technical data
Connection data
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, maximum
0.5 mm²
Connection in acc. with standard
IEC/EN 60079-7
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Internal cylindrical gage
A3
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
IEC/EN 60079-7
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1
27141120
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
08/24/2020 Page 3 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Classifications
eCl@ss
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
Approvals
DNV GL / CSA / CCA / KR / UL Recognized / cUL Recognized / IECEE CB Scheme / EAC / RS / VDE Zeichengenehmigung / cULus Recognized
Ex Approvals
IECEx / ATEX / EAC Ex
Approval details
08/24/2020 Page 4 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Approvals
DNV GL
https://approvalfinder.dnvgl.com/
TAE00001CS
CSA
http://www.csagroup.org/services-industries/product-listing/
13631
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
20 A
20 A
mm²/AWG/kcmil
28-12
28-12
CCA
mm²/AWG/kcmil
1.5
CH-02-IK-0258.I
KR
http://www.krs.co.kr/eng/main/main.aspx
HMB36894-EL001
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
20 A
20 A
mm²/AWG/kcmil
28-12
28-12
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
20 A
20 A
mm²/AWG/kcmil
28-12
28-12
FILE E 60425
08/24/2020 Page 5 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Approvals
IECEE CB Scheme
http://www.iecee.org/
DE1-63032
EAC
RU CDE.A*30.B.01742
RS
http://www.rs-head.spb.ru/en/index.php
17.00013.272
VDE Zeichengenehmigung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
40009033
Nominal voltage UN
800 V
Nominal current IN
24 A
mm²/AWG/kcmil
0.2-2.5
cULus Recognized
Accessories
Accessories
Cover
Group cover marker - BST 2,5 - 3061282
Cover for actuation shaft, 5-pos., for spring-cage terminal blocks with width of 5.2 mm
DIN rail
08/24/2020 Page 6 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
08/24/2020 Page 7 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
Documentation
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
08/24/2020 Page 8 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
End cover
End cover - D-STS 2,5 - 3031762
End cover, length: 51 mm, width: 2.2 mm, height: 43 mm, color: gray
Filler plug
Filler plugs - CEC 2,5 - 3062757
Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT)
with a width of 5.2 mm
Insulating sleeve
Insulating sleeve - ISH 2,5/0,2 - 3002843
Insulating sleeve, color: white
08/24/2020 Page 9 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
Insulating sleeve - ISH 2,5/0,5 - 3002856
Insulating sleeve, color: gray
Insulating sleeve - ISH 2,5/1,0 - 3002869
Insulating sleeve, color: black
Labeled terminal marker
Warning cover - WST 2,5 - 3030941
Warning cover, 5-pos., for terminal width: 5.2 mm
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm,
Number of individual labels: 10
08/24/2020 Page 10 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415
Zack marker strip, Strip, white, labeled, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual
labels: 96
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual
labels: 72
08/24/2020 Page 11 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels:
10
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm,
Number of individual labels: 10
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number
of individual labels: 10
08/24/2020 Page 12 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual
labels: 96
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm, Number of individual
labels: 72
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Actuation tool - ST-BW - 1207608
Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels:
10
08/24/2020 Page 13 / 15
https://www.phoenixcontact.com/us/products/3037562
Feed-through terminal block - STS 2,5-QUATTRO RD - 3037562
Accessories
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size:
4.6 x 10.5 mm, Number of individual labels: 72
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual labels: 96
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size:
4.4 x 4.7 mm, Number of individual labels: 72
08/24/2020 Page 14 / 15
https://www.phoenixcontact.com/us/products/3037562
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
08/24/2020 Page 15 / 15
