3037892

https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Knife disconnect terminal block, nom. voltage: 400 V, nominal current: 20 A, connection method: Spring-cage connection, cross section: 0.08 mm² - 4 mm², AWG: 28 - 12, length: 84 mm, width: 5.2 mm, color: orange, mounting: NS 35/7,5, NS 35/15 Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918936860 Weight per Piece (excluding packing) 11.200 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Nominal cross section 2.5 mm² Color orange Insulating material PA Flammability rating according to UL 94 V0 Maximum power dissipation for nominal condition 0.77 W Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III 04/19/2021   Page 1 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Technical data General Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 20 A (with 4 mm² conductor cross section) Nominal current IN 20 A (with 4 mm² conductor cross section) Nominal voltage UN 400 V Open side panel Yes Dimensions Width 5.2 mm End cover width 2.2 mm Length 84 mm Height NS 35/7,5 36.5 mm Height NS 35/15 44 mm Ambient conditions Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C) Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Connection data Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.08 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm² Connection method Spring-cage connection Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Ambient conditions Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C) 04/19/2021   Page 2 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Technical data Ambient conditions Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Classifications eCl@ss eCl@ss 10.0.1 27141126 eCl@ss 11.0 27141126 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141126 eCl@ss 9.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 6.0 EC000902 ETIM 7.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 04/19/2021   Page 3 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Classifications UNSPSC UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B C D Nominal voltage UN 300 V 150 V 300 V Nominal current IN 16 A 16 A 10 A mm²/AWG/kcmil 28-12 28-12 28-12 UL Recognized    13631  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D Nominal voltage UN 600 V 600 V 600 V Nominal current IN 16 A 16 A 5A mm²/AWG/kcmil 28-12 28-12 28-12  FILE E 60425 04/19/2021   Page 4 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Approvals cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 28-12 28-12  FILE E 60425     RU CDE.A*30.B.01742 EAC      RU CDE.BL08.B.00644 cULus Recognized       EAC  Accessories Accessories Bridge Wire bridge - FBSW 2-5/250MM - 3030172 Wire bridge, length: 250 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/60MM - 3030170 Wire bridge, length: 60 mm, width: 5.1 mm, number of positions: 1, color: red/black     04/19/2021   Page 5 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Wire bridge - FBSW 2-5/110MM - 3030171 Wire bridge, length: 110 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/250MM - 3030172 Wire bridge, length: 250 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/60MM - 3030170 Wire bridge, length: 60 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/110MM - 3030171 Wire bridge, length: 110 mm, width: 5.1 mm, number of positions: 1, color: red/black     Component plug terminal block Component connector - P-CO 2-5 R47K - 3032447 Component connector, with 47 kOhm resistance for wire-break monitoring, pitch: 5.2 mm, length: 8.9 mm, width: 4.1 mm, height: 34.8 mm, number of positions: 2, color: black     04/19/2021   Page 6 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Cover Group cover marker - BST 2,5 - 3061282 Cover for actuation shaft, 5-pos., for spring-cage terminal blocks with width of 5.2 mm     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     04/19/2021   Page 7 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     Documentation 04/19/2021   Page 8 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     End block End clamp - E/AL-NS 35 - 1201662 End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum     End cover End cover - D-ST 2,5-QUATTRO-MT - 3038590 End cover, length: 84 mm, width: 2.2 mm, height: 36.5 mm, color: gray     Filler plug Filler plugs - CEC 2,5 - 3062757 Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT) with a width of 5.2 mm     Insulating sleeve 04/19/2021   Page 9 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Insulating sleeve - ISH 2,5/0,2 - 3002843 Insulating sleeve, color: white     Insulating sleeve - ISH 2,5/0,5 - 3002856 Insulating sleeve, color: gray     Insulating sleeve - ISH 2,5/1,0 - 3002869 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red     04/19/2021   Page 10 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, pitch: 5.2 mm, length: 23 mm, width: 24.6 mm, number of positions: 5, color: red     Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-5 - 3038930 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: red     04/19/2021   Page 11 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Plug-in bridge - FBSR 2-5 - 3033702 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-5 - 3001591 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-5 - 3001592 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-5 - 3001593 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-5 - 3033710 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red     04/19/2021   Page 12 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Plug-in bridge - FBS 2-5 BU - 3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-5 BU - 3036880 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-5 BU - 3036893 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-5 BU - 3036903 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-5 BU - 3036916 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue     04/19/2021   Page 13 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Plug-in bridge - FBS 20-5 BU - 3036929 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 50-5 BU - 3032114 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue     Labeled terminal marker Warning cover - WST 2,5 - 3030941 Warning cover, 5-pos., for terminal width: 5.2 mm     Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017 Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     04/19/2021   Page 14 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020 Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415 Zack marker strip, Strip, white, labeled, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72     04/19/2021   Page 15 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm, Number of individual labels: 10     04/19/2021   Page 16 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm, Number of individual labels: 72     Partition plate Spacer plate - DP PS-5 - 3036725 Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Actuation tool - ST-BW - 1207608 Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages     04/19/2021   Page 17 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Switching lock Switching lock - S-MT - 3247954 Switching lock, length: 10.5 mm, width: 3.5 mm, height: 23.1 mm, color: white     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72     04/19/2021   Page 18 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm, Number of individual labels: 96     Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm, Number of individual labels: 72     Test plug terminal block Test plugs - PS-5 - 3030983 Test plugs, Modular test plug, color: red     Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, color: red     04/19/2021   Page 19 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     04/19/2021   Page 20 / 22 https://www.phoenixcontact.com/us/products/3037892 Knife disconnect terminal block - ST 2,5-QUATTRO-MT OG - 3037892 Accessories Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     04/19/2021   Page 21 / 22 https://www.phoenixcontact.com/us/products/3037892 Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 04/19/2021   Page 22 / 22