Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
Installation ground terminal block, Assembly instructions:
For secure fastening of the neutral busbar, supports must be set at the beginning and end of
each terminal strip as well as every 20 cm on longer terminal strips., nom. voltage: 400 V,
nominal current: 34 A, Screw connection, 1st, 2nd and 3rd level, cross section: 0.2 mm2 - 4 mm2,
Screw connection, cross section: 0.2 mm 2 - 4 mm 2 , mounting type: NS 35/15, NS 35/7,5,
color: gray
Commercial Data
Item number
3038024
Packing unit
1 pc
Minimum order quantity
15 pc
Note
Made to Order (non-returnable)
Sales Key
B01
Product Key
BE1253
GTIN
4017918876647
Weight per Piece (including packing)
55.65 g
Weight per Piece (excluding packing)
55.65 g
Customs tariff number
85369010
Country of origin
GR
Dec 11, 2022, 4:02 PM
Page 1 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Technical Data
Notes
General
Assembly instructions:
For secure fastening of the neutral busbar, supports must be set
at the beginning and end of each terminal strip as well as every
20 cm on longer terminal strips.
Product properties
Product type
Ground terminal block
Number of connections
12
Number of rows
3
Potentials
3
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Electrical properties
Rated surge voltage
4 kV
Current carrying capacity of the neutral busbar
140 A
Connection data
Grounding foot
Yes
Number of connections per level
2
1st, 2nd and 3rd level
Screw thread
M3
Note
Please observe the current carrying capacity of the DIN rails.
Tightening torque
0.5 ... 0.6 Nm
Stripping length
9 mm
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Conductor cross section solid
0.2 mm² ... 4 mm²
Cross section AWG
24 ... 12 (converted acc. to IEC)
Conductor cross section flexible
0.2 mm² ... 4 mm²
Conductor cross section, flexible [AWG]
24 ... 12 (converted acc. to IEC)
Flexible conductor cross section flexible (ferrule, w/o plastic
sleeve)
0.25 mm² ... 4 mm²
Flexible conductor cross section (ferrule with plastic sleeve)
0.25 mm² ... 2.5 mm²
2 conductors with same cross section, solid
0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible
0.2 mm² ... 1 mm²
2 conductors with same cross section, flexible, with ferrule
without plastic sleeve
0.25 mm² ... 1 mm²
2 conductors with the same cross section, flexible, with TWIN
ferrule with plastic sleeve
0.5 mm² ... 0.5 mm²
Nominal current
34 A
Dec 11, 2022, 4:02 PM
Page 2 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Maximum load current
34 A (with 4 mm² conductor cross section)
Nominal voltage
400 V (phase conductor/phase conductor)
250 V (phase conductor/PE)
250 V (phase conductor/N)
Screw thread
M2,5
Note
Disconnect slide
Tightening torque
0.5 ... 0.6 Nm
Stripping length
9 mm
Connection in acc. with standard
IEC / EN
Conductor cross section solid
0.2 mm² ... 4 mm²
Cross section AWG
24 ... 12 (converted acc. to IEC)
Conductor cross section flexible
0.2 mm² ... 4 mm²
Flexible conductor cross section flexible (ferrule, w/o plastic
sleeve)
0.25 mm² ... 4 mm²
Flexible conductor cross section (ferrule with plastic sleeve)
0.25 mm² ... 2.5 mm²
2 conductors with same cross section, solid
0.2 mm² ... 1 mm²
2 conductors with same cross section, flexible
0.2 mm² ... 1 mm²
2 conductors with same cross section, flexible, with ferrule
without plastic sleeve
0.25 mm² ... 1 mm²
2 conductors with the same cross section, flexible, with TWIN
ferrule with plastic sleeve
0.5 mm² ... 0.5 mm²
Nominal current
32 A
Maximum load current
34 A (with 4 mm² conductor cross section)
Nominal voltage
400 V (phase conductor/phase conductor)
250 V (phase conductor/PE)
250 V (phase conductor/N)
Maximum load current
34 A (with 4 mm² conductor cross section)
Dimensions
Width
18.6 mm
End cover width
1.5 mm
Height NS 35/15
59 mm
Height NS 35/7,5
51.5 mm
Length
88 mm
Material specifications
Color
gray
Flammability rating according to UL 94
V2
Insulating material group
I
Insulating material
PA
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Dec 11, 2022, 4:02 PM
Page 3 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Electrical tests
Surge voltage test
Test voltage setpoint
4.8 kV
Result
Test passed
Temperature-rise test
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result
Test passed
Short-time withstand current 4 mm²
0.48 kA
Result
Test passed
Power-frequency withstand voltage
Test voltage setpoint
1.5 kV
Result
Test passed
Mechanical properties
Mechanical data
Open side panel
Yes
Mechanical tests
Mechanical strength
Result
Test passed
Attachment on the carrier
DIN rail/fixing support
NS 35
Test force setpoint
1N
Result
Test passed
Test for conductor damage and slackening
Rotation speed
10 rpm
Revolutions
135
Conductor cross section/weight
0.2 mm² / 0.2 kg
4 mm² / 0.9 kg
Result
Test passed
Environmental and real-life conditions
Dec 11, 2022, 4:02 PM
Page 4 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Needle-flame test
Time of exposure
30 s
Result
Test passed
Standards and regulations
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
IEC / EN
Mounting
Mounting type
NS 35/15
NS 35/7,5
Screw thread
M2,5
Dec 11, 2022, 4:02 PM
Page 5 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Accessories
Note: Applying some accessories below might limit this product.
Fixed bridge
Fixed bridge - FBI 10- 6 - 0203250
https://www.phoenixcontact.com/us/products/0203250
Fixed bridge, pitch: 6.2 mm, color: silver
Max. current carrying capacity: 32 A
Bridge
Bridge - ISSBI 10- 6 - 0301505
https://www.phoenixcontact.com/us/products/0301505
Bridge, pitch: 6 mm, color: silver
Max. current carrying capacity: 30 A
Dec 11, 2022, 4:02 PM
Page 6 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Neutral busbar
Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174
https://www.phoenixcontact.com/us/products/0402174
Neutral busbar, DIN VDE 0611-4: 1991-02, material: Copper, tin-plated,
color: silver
Max. current carrying capacity: 140 A
Bridge bar isolator
Bridge bar isolator - IS-K 4 - 1302338
https://www.phoenixcontact.com/us/products/1302338
Bridge bar isolator, color: gray
Dec 11, 2022, 4:02 PM
Page 7 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
End cover
End cover - D-PIK 4 - 2714080
https://www.phoenixcontact.com/us/products/2714080
End cover, length: 88 mm, width: 1.5 mm, color: gray
Partition plate
Partition plate - ATP-PIK - 2714145
https://www.phoenixcontact.com/us/products/2714145
Partition plate, length: 95 mm, width: 1.5 mm, height: 57 mm, color: gray
Dec 11, 2022, 4:02 PM
Page 8 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Connection terminal block
Connection terminal block - AKG 16 BU - 0423014
https://www.phoenixcontact.com/us/products/0423014
Connection terminal block, nominal current: 76 A, connection method: Screw
connection, Rated cross section: 16 mm2, cross section: 1.5 mm2 - 16 mm2,
mounting: Neutral busbar, color: blue
Connection terminal block
Connection terminal block - AKG 35 BU - 0424013
https://www.phoenixcontact.com/us/products/0424013
Connection terminal block, nom. voltage: 300 V, nominal current: 125 A,
connection method: Screw connection, Rated cross section: 35 mm 2, cross
section: 2.5 mm2 - 35 mm2, mounting: Neutral busbar, color: blue
Dec 11, 2022, 4:02 PM
Page 9 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Screwdriver
Screwdriver - SZS 0,6X3,5 - 1205053
https://www.phoenixcontact.com/us/products/1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed
screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Marker pen
Marker pen - X-PEN 0,35 - 0811228
https://www.phoenixcontact.com/us/products/0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling
extremely wipe-proof, line thickness 0.35 mm
Dec 11, 2022, 4:02 PM
Page 10 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Support bracket
Support bracket - AB-UTI/3 - 3076038
https://www.phoenixcontact.com/us/products/3076038
Support bracket, Bracket for busbars, set every 20 cm, pitch: 200 mm, length:
93.5 mm, width: 2.2 mm, height: 51.2 mm, number of positions: 1, color: blue
DIN rail perforated
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
https://www.phoenixcontact.com/us/products/0801733
DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, Standard profile, color: silver, Pack of 25 (50 m)
Dec 11, 2022, 4:02 PM
Page 11 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
DIN rail, unperforated
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
https://www.phoenixcontact.com/us/products/0801681
DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, Standard profile, color: silver, Pack of 25 (50 m)
DIN rail perforated
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
https://www.phoenixcontact.com/us/products/1204119
DIN rail perforated, acc. to EN 60715, material: Steel, Galvanized, white
passivated, Standard profile, color: silver, Pack of 25 (50 m)
Dec 11, 2022, 4:02 PM
Page 12 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
DIN rail, unperforated
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - 1204122
https://www.phoenixcontact.com/us/products/1204122
DIN rail, unperforated, acc. to EN 60715, material: Steel, Galvanized, white
passivated, Standard profile, color: silver, Pack of 10 (20 m)
DIN rail, unperforated
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
https://www.phoenixcontact.com/us/products/0801704
DIN rail, unperforated, acc. to EN 60715, material: Aluminum, uncoated,
Standard profile, color: silver, Pack of 25 (50 m)
Dec 11, 2022, 4:02 PM
Page 13 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
DIN rail perforated
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
https://www.phoenixcontact.com/us/products/1206421
DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, Standard
profile, color: silver, Pack of 25 (50 m)
DIN rail, unperforated
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
https://www.phoenixcontact.com/us/products/1206434
DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, Standard
profile, color: silver, Pack of 25 (50 m)
Dec 11, 2022, 4:02 PM
Page 14 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
DIN rail, unperforated
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - 0801762
https://www.phoenixcontact.com/us/products/0801762
DIN rail, unperforated, acc. to EN 60715, material: Copper, uncoated, Standard
profile, color: copper-colored, Pack of 10 (20 m)
End cap
End cap - NS 35/ 7,5 CAP - 1206560
https://www.phoenixcontact.com/us/products/1206560
DIN rail end piece, for DIN rail NS 35/7.5
Dec 11, 2022, 4:02 PM
Page 15 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Zack marker strip
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
https://www.phoenixcontact.com/us/products/1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip
Zack marker strip - ZB 6 CUS - 0824992
https://www.phoenixcontact.com/us/products/0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer
specifications, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Dec 11, 2022, 4:02 PM
Page 16 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Zack marker strip
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
https://www.phoenixcontact.com/us/products/1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER,
printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500,
mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 6.
15 x 10.5 mm, Number of individual labels: 10
Zack marker strip
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
https://www.phoenixcontact.com/us/products/1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER,
Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500,
mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 6.
15 x 10.5 mm, Number of individual labels: 10
Dec 11, 2022, 4:02 PM
Page 17 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Zack marker strip
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
https://www.phoenixcontact.com/us/products/1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER,
printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type:
snapped, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm,
Number of individual labels: 10
Marker for terminal blocks
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
https://www.phoenixcontact.com/us/products/1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type:
snapped, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm,
Number of individual labels: 10
Dec 11, 2022, 4:02 PM
Page 18 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Marker for terminal blocks
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
https://www.phoenixcontact.com/us/products/1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting
type: snapped, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5
mm, Number of individual labels: 10
Marker for terminal blocks
Marker for terminal blocks - UC-TM 6 - 0818085
https://www.phoenixcontact.com/us/products/0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm,
lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
Dec 11, 2022, 4:02 PM
Page 19 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Marker for terminal blocks
Marker for terminal blocks - UC-TM 6 CUS - 0824589
https://www.phoenixcontact.com/us/products/0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to
customer specifications, mounting type: snap into tall marker groove, for terminal
block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 80
Marker for terminal blocks
Marker for terminal blocks - UCT-TM 6 - 0828736
https://www.phoenixcontact.com/us/products/0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped, for terminal block width: 6.2
mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60
Dec 11, 2022, 4:02 PM
Page 20 (21)
Installation ground terminal block - PIK 4-1PE/3L/1NT
3038024
https://www.phoenixcontact.com/us/products/3038024
Marker for terminal blocks
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
https://www.phoenixcontact.com/us/products/0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to
customer specifications, mounting type: snap into tall marker groove, for terminal
block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 60
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Dec 11, 2022, 4:02 PM
Page 21 (21)
