3038079

https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Installation level terminal block, Spring-cage connection, Cross section:  0.08 mm² - 4 mm², AWG: 28 - 12, Width: 15.6 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Key commercial data Packing unit 11 Minimum order quantity 15 1 Weight per Piece (excluding packing) 52.92 GRM Custom tariff number 85369010 Country of origin Germany Technical data General Note Assembly instructions: For secure fastening of the neutral busbar, supports must be set at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips. Number of levels 3 Number of connections 12 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 24 A (with 4 mm² conductor cross section) Current carrying capacity of the neutral busbar 140 A Rated surge voltage 4 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 / IEC 60947-7-2 Nominal current IN 24 A Nominal voltage UN 400 V (phase conductor/phase conductor) 19.11.2013   Page 1 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Technical data General 250 V (phase conductor/PE) 250 V (phase conductor/N) Open side panel ja Dimensions Width 15.6 mm Length 97 mm Height NS 35/7,5 50.5 mm Height NS 35/15 58 mm Connection data Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.08 mm² Conductor cross section stranded max. 4 mm² Conductor cross section AWG/kcmil min. 28 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Connection method Spring-cage connection Stripping length 10 mm Internal cylindrical gage A3 Classifications eCl@ss eCl@ss 4.0 27141125 eCl@ss 4.1 27141125 eCl@ss 5.0 27141125 eCl@ss 5.1 27141125 eCl@ss 6.0 27141125 eCl@ss 7.0 27141125 eCl@ss 8.0 27141125 19.11.2013   Page 2 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Classifications ETIM ETIM 2.0 EC001329 ETIM 3.0 EC001329 ETIM 4.0 EC001329 ETIM 5.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST / GOST Ex Approvals Approvals submitted Approval details GOST  GOST  Accessories Accessories 19.11.2013   Page 3 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Bridge Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, Number of positions: 4, Color: red     Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, Number of positions: 5, Color: red     Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, Number of positions: 10, Color: red     19.11.2013   Page 4 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, Number of positions: 20, Color: red     Documentation Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     End cover End cover - D-STI/3 - 3030844 End cover, Length: 97 mm, Width: 2.2 mm, Height: 50.5 mm, Color: gray     Spacer plate - DP PS-5 - 3036725 Spacer plate, Color: red     Insulating sleeve 19.11.2013   Page 5 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, Color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, Color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, Color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, Color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, Color: green     19.11.2013   Page 6 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black     Insulation stop sleeve - ISH 2,5/0,2 - 3002843 Insulation stop sleeve, Color: white     Insulation stop sleeve - ISH 2,5/0,5 - 3002856 Insulation stop sleeve, Color: gray     Insulation stop sleeve - ISH 2,5/1,0 - 3002869 Insulation stop sleeve, Color: black     Labeled terminal marker 19.11.2013   Page 7 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     19.11.2013   Page 8 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     19.11.2013   Page 9 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     Neutral conductor rail 19.11.2013   Page 10 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174 PEN conductor busbar, 3mm x 10 mm, length: 1000 mm     Partition plate Partition plate - ATP-STI/3 - 3030857 Partition plate, Length: 107 mm, Width: 2.2 mm, Height: 55 mm, Color: gray     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     19.11.2013   Page 11 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm     Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm     Test plug terminal block 19.11.2013   Page 12 / 13 https://www.phoenixcontact.com/us/products/3038079 Installation level terminal block - STI 2,5-3PE/3L/3NT - 3038079 Accessories Test plugs - MPS-MT - 0201744 Test plugs, Color: silver     Test adapter - PAI-4-N GY - 3032871 Test adapter, Color: gray     Test adapter - PS-5 - 3030983 Test adapter, Color: red     Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, Color: red     © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.11.2013   Page 13 / 13