3038134

Spring Cage Feeed Through Terminal Blocks with Angled Design STS 6 The ST-DESK series of spring cage terminal blocks features an angled conductor entry. This family of compact terminal blocks is used especially in wiring systems where space is to be saved using underfloor wiring. With their dual jumper channel, STS 6 and STS 6-TWIN offer a variety of options for potential bridging. Moreover, these jumper channels are conveniently positioned and are in the same location as is the case for the 2.5 and 4 mm2 terminal blocks of the ST-DESK series. Using adapter bridge RB-ST 6-(4/2,5), the potential can be distributed both to the left or right to the terminal blocks with smaller nominal cross sections. Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com Spring Cage Feed Through Terminal Block STS 6 (IEC) [mm2] IEC 60 947-7-1 rigid solid flexible stranded AWG I [A] U [V] 0.2-10 0.2-6 24-8 52 800 Technical data Spring cage terminal block, for mounting on 3 gray blue (1) End cover (2) Plug-in bridge, for cross-connections in the terminal center terminal width 8.2 terminal width 8.2 gray 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. (3) Adapter bridge, for connecting an STS 6 to an STS 4 or STS 2,5 Type Order No. Pcs. Pkt. STS 6 STS 6 BU 30 38 12 1 30 38 13 4 50 50 D-STS 6 30 38 18 9 50 FBS 2-8 FBS 3-8 FBS 4-8 FBS 5-8 FBS 10-8 Imax.: 41 A 41 A 41 A 41 A 41 A 30 30 28 4 30 30 29 7 30 30 30 7 30 30 31 0 30 30 32 3 10 10 10 10 10 RB ST 6-(2,5/4) Imax.: 48 A 30 30 86 0 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 6 30 24 48 1 50 (5) Test adapter, for 4 mm ∅ test plug PS and 4 mm ∅ safety test plugs, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 SZF 2 - 0,8 x 4,0 12 04 52 0 10 ZB 8:UNPRINTED 10 52 00 2 10 (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, can be labeled with ZBF 5 (8) Screwdriver, for actuating the tension spring (9) Zack strip, 10-section, for labeling in the terminal center white Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 2 of 5 8.2 / 58 / 2.2 50.0 / 57.5 52 / 10 // 41 / 6 8/3 III / I 0.25 - 6 0.25 - 6 0.25 - 1.5 12 A5 PA V0 applied for applied for Spring Cage Feed Through Terminal Block STS 6-TWIN (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] IEC 60 947-7-1 0.2-10 0.2-6 24-8 52* 800 * The max. load current must not be exceeded by the total current of all connected conductors. Technical data Spring cage terminal block, for mounting on 3 gray blue (1) End cover (2) Plug-in bridge, for cross-connections in the terminal center terminal width 8.2 terminal width 8.2 gray 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. (3) Adapter bridge, for connecting an STS 6 to an STS 4 or STS 2,5 Type Order No. Pcs. Pkt. STS 6-TWIN STS 6-TWIN BU 30 38 15 0 30 38 16 3 50 50 D-STS 6-TWIN 30 38 20 2 50 FBS 2-8 FBS 3-8 FBS 4-8 FBS 5-8 FBS 10-8 Imax.: 41 A 41 A 41 A 41 A 41 A 30 30 28 4 30 30 29 7 30 30 30 7 30 30 31 0 30 30 32 3 10 10 10 10 10 RB ST 6-(2,5/4) Imax.: 48 A 30 30 86 0 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 6 30 24 48 1 50 (5) Test adapter, for 4 mm ∅ test plug PS and 4 mm ∅ safety test plugs, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 SZF 2 - 0,8 x 4,0 12 04 52 0 10 ZB 8:UNPRINTED 10 52 00 2 10 (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, can be labeled with ZBF 5 (8) Screwdriver, for actuating the tension spring (9) Zack strip, 10-section, for labeling in the terminal center white Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 3 of 5 8.2 / 70 / 2.2 50.0 / 57.5 52 / 10 // 41 / 6 8/3 III / I 0.25 - 6 0.25 - 6 0.25 - 1.5 12 A5 PA V0 applied for applied for Spring Cage Ground Terminal Block STS 6-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.2-10 0.2-6 24-8 Current carrying capacity of mounting rails, see CLIPLINE catalog. Technical data Type Order No. Pcs. Pkt. STS 6-PE 30 38 14 7 50 D-STS 6 30 38 18 9 50 FBS 2-8 FBS 3-8 FBS 4-8 FBS 5-8 FBS 10-8 30 30 28 4 30 30 29 7 30 30 30 7 30 30 31 0 30 30 32 3 10 10 10 10 10 RB ST 6-(2,5/4) 30 30 86 0 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 6 30 24 48 1 50 (5) Test adapter, for 4 mm ∅ test plug PS and 4 mm ∅ safety test plugs, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 SZF 2 - 0,8 x 4,0 12 04 52 0 10 ZB 8:UNPRINTED 10 52 00 2 10 Spring cage ground terminal block, for mounting on 3 green-yellow (1) End cover (2) Plug-in bridge, for cross-connections in the terminal center terminal width 8.2 gray 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. (3) Adapter bridge, for connecting an STS 6 to an STS 4 or STS 2,5 (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, can be labeled with ZBF 5 (8) Screwdriver, for actuating the tension spring (9) Zack strip, 10-section, for labeling in the terminal center white Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 4 of 5 8.2 / 58 / 2.2 50.0 / 57.5 – 8/3 III / I 0.25 - 6 0.25 - 6 0.25 - 1.5 12 A5 PA V0 applied for applied for Spring Cage Ground Terminal Block STS 6-TWIN-PE (IEC) [mm2] rigid solid flexible stranded AWG Type Order No. Pcs. Pkt. STS 6-TWIN-PE 30 38 17 6 50 D-STS 6-TWIN 30 38 20 2 50 FBS 2-8 FBS 3-8 FBS 4-8 FBS 5-8 FBS 10-8 30 30 28 4 30 30 29 7 30 30 30 7 30 30 31 0 30 30 32 3 10 10 10 10 10 RB ST 6-(2,5/4) 30 30 86 0 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 6 30 24 48 1 50 (5) Test adapter, for 4 mm ∅ test plug PS and 4 mm ∅ safety test plugs, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 SZF 2 - 0,8 x 4,0 12 04 52 0 10 ZB 8:UNPRINTED 10 52 00 2 10 Spring cage ground terminal block, for mounting on 3 green-yellow (1) End cover (2) Plug-in bridge, for cross-connections in the terminal center terminal width 8.2 gray 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. (3) Adapter bridge, for connecting an STS 6 to an STS 4 or STS 2,5 (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, can be labeled with ZBF 5 (8) Screwdriver, for actuating the tension spring (9) Zack strip, 10-section, for labeling in the terminal center white Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page5 5von of 5 Phoenix Contact Seite 8.2 / 70 / 2.2 50.0 / 57.5 – 8/3 III / I 0.25 - 6 0.25 - 6 0.25 - 1.5 12 A5 PA V0 applied for applied for  PHOENIX CONTACT 15.03.03 TNR: 5152487-00 Technical data http://www.phoenixcontact.com IEC 60 947-7-2 0.2-10 0.2-6 24-8 Current carrying capacity of mounting rails, see CLIPLINE catalog.