https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Installation terminal block, Spring-cage connection, cross section: 0.2 mm² - 16 mm², AWG: 24 - 6, width: 10 mm,
color: gray, mounting type: NS 35/7,5, NS 35/15
Why buy this product
Compatible with all Phoenix Contact installation terminal blocks
Each terminal point can be clearly labeled and easily recognized in every terminal block mounting position
Compact design tailored to installation distributors
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
25 STK
GTIN
GTIN
4017918899714
Weight per Piece (excluding packing)
29.460 g
Custom tariff number
85369010
Country of origin
Romania
Technical data
General
Note
Assembly instructions:
For secure fastening of the neutral busbar, supports must be set at the
beginning and end of each terminal strip as well as every 20 cm on longer
terminal strips.
Number of levels
1
Number of connections
2
Nominal cross section
10 mm²
04/02/2018 Page 1 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Technical data
General
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Maximum load current
57 A (with 16 mm² conductor cross section)
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.82 W
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
57 A
Maximum load current
57 A (with 16 mm² conductor cross section)
Nominal voltage UN
400 V
Open side panel
Yes
Dimensions
Width
10 mm
Length
87 mm
Height NS 35/7,5
49 mm
Height NS 35/15
56.5 mm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
16 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
Connection method
Spring-cage connection
Stripping length
18 mm
Internal cylindrical gage
A6
04/02/2018 Page 2 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Technical data
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141125
eCl@ss 4.1
27141125
eCl@ss 5.0
27141125
eCl@ss 5.1
27141125
eCl@ss 6.0
27141125
eCl@ss 7.0
27141125
eCl@ss 8.0
27141125
eCl@ss 9.0
27141125
ETIM
ETIM 2.0
EC001329
ETIM 3.0
EC001329
ETIM 4.0
EC001329
ETIM 5.0
EC001329
ETIM 6.0
EC001329
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
04/02/2018 Page 3 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
EAC-Zulassung
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
04/02/2018 Page 4 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Accessories
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
04/02/2018 Page 5 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
Documentation
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
End cover
04/02/2018 Page 6 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Accessories
End cover - D-STI 10/16 - 3038309
End cover, length: 89.5 mm, width: 2 mm, height: 49 mm, color: gray
Jumper
Plug-in bridge - FBS 2-10 - 3005947
Plug-in bridge, pitch: 10.2 mm, number of positions: 2, color: red
Plug-in bridge - FBS 5-10 - 3005948
Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: red
Plug-in bridge - FBS 5-10 BU - 1040620
Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: blue
Labeled terminal marker
Warning cover - WST 10/35 - 3030006
Warning cover, 5-pos., for terminal widths of 10.2 mm, 12.2 mm, and 16 mm
04/02/2018 Page 7 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Accessories
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2
mm, lettering field size: 10.15 x 10.5 mm
Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 - 10, 11 - 20, etc. up to 991 - 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm,
lettering field size: 10.15 x 10.5 mm
Zack marker strip - ZB10,LGS:GLEICHE ZAHLEN - 1053030
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers
1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
04/02/2018 Page 8 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Accessories
Marker for terminal blocks - ZB10,LGS:U-N - 1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: U, V, W, N, GND,
U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm
Screwdriver tools
Screwdriver - SZF 2-0,8X4,0 - 1204520
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2component grip, with non-slip grip
Support
Support bracket - AB-STI 16/10 - 3037669
Support bracket, Bracket for busbars, set every 20 cm, pitch: 200 mm, length: 95 mm, width: 2 mm, height: 49 mm,
number of positions: 1, color: blue
04/02/2018 Page 9 / 10
https://www.phoenixcontact.com/us/products/3038215
Installation terminal block - STI 10 - 3038215
Accessories
Terminal marking
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field
size: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for
terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm
Test plug terminal block
Test plugs - PS-4/E - 3036709
Test plugs, color: red
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/02/2018 Page 10 / 10
