https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Installation level terminal block, Spring-cage connection, Cross section: 0.2 mm² - 16 mm², AWG: 24 - 6,
Width: 10 mm, Color: blue, Mounting type: NS 35/15, NS 35/7,5
Product Features
The N disconnect slides are located in the same position on all Phoenix Contact screw and spring-cage installation terminal blocks
Key commercial data
Packing unit
11
Weight per Piece (excluding packing)
33.47 GRM
Custom tariff number
85369010
Country of origin
Romania
Technical data
General
Note
Assembly instructions:
For secure fastening of the neutral busbar, supports must be set at the
beginning and end of each terminal strip as well as every 20 cm on longer
terminal strips.
Number of levels
1
Number of connections
2
Color
blue
Insulating material
PA
Inflammability class according to UL 94
V0
Maximum load current
57 A (with 16 mm² conductor cross section)
Current carrying capacity of the neutral busbar
140 A
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
19.11.2013 Page 1 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Technical data
General
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
57 A
Nominal voltage UN
400 V
Open side panel
ja
Dimensions
Width
10 mm
Length
87 mm
Height NS 35/7,5
50 mm
Height NS 35/15
57.5 mm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
16 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
10 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
6
Conductor cross section stranded, with ferrule without plastic sleeve min.
1.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
1.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
10 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
Connection method
Spring-cage connection
Stripping length
18 mm
Classifications
eCl@ss
eCl@ss 4.0
27141125
eCl@ss 4.1
27141125
eCl@ss 5.0
27141125
eCl@ss 5.1
27141125
eCl@ss 6.0
27141125
eCl@ss 7.0
27141125
19.11.2013 Page 2 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Classifications
eCl@ss
eCl@ss 8.0
27141125
ETIM
ETIM 2.0
EC001329
ETIM 3.0
EC001329
ETIM 4.0
EC001329
ETIM 5.0
EC001329
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
GOST / GOST
Ex Approvals
Approvals submitted
Approval details
GOST
GOST
19.11.2013 Page 3 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Accessories
Accessories
Bridge
Plug-in bridge - FBS 2-10 - 3005947
Plug-in bridge, Number of positions: 2, Color: red
Cover profile
Cover profile - AP-NLS - 5037133
Cover profile, Length: 1000 mm, Color: transparent
Documentation
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
End cover
End cover - D-STI 10/16 - 3038309
End cover, Length: 89.5 mm, Width: 2 mm, Height: 49 mm, Color: gray
Labeled terminal marker
19.11.2013 Page 4 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Accessories
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm
Mounting rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
19.11.2013 Page 5 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Accessories
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
19.11.2013 Page 6 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Accessories
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
Neutral conductor rail
Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174
PEN conductor busbar, 3mm x 10 mm, length: 1000 mm
Screwdriver tools
Screwdriver - SZF 2-0,8X4,0 - 1204520
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2component grip, with non-slip grip
Support
19.11.2013 Page 7 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Accessories
Support bracket - AB-STI 16/10 - 3037669
Support bracket, Bracket for busbars, set every 20 cm, Length: 95 mm, Width: 2 mm, Height: 49 mm, Color: blue
Terminal marking
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 10.2
mm, Lettering field: 8.9 x 9.6 mm
Additional products
Connection terminal block - AKG 16 BU - 0423014
Connection terminal block, Connection method Screw connection, Load current : 76 A, Cross section: 1.5 mm² - 16 mm²,
Width: 9.8 mm, Color: blue
19.11.2013 Page 8 / 9
https://www.phoenixcontact.com/us/products/3038244
Installation level terminal block - STN 10 - 3038244
Accessories
Connection terminal block - AKG 35 BU - 0424013
Connection terminal block, Connection method Screw connection, Load current : 125 A, Cross section: 2.5 mm² - 35
mm², Width: 14.3 mm, Color: blue
Branch terminal - IAK 16 - 2715982
Branch terminal, Connection method Screw connection, Cross section: 0.5 mm² - 16 mm², Width: 7.7 mm, Color: gray
Branch terminal - IAK 16 - 2715982
Branch terminal, Connection method Screw connection, Cross section: 0.5 mm² - 16 mm², Width: 7.7 mm, Color: gray
Drawings
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
19.11.2013 Page 9 / 9
