3038600

Four-Conductor Spring Cage Terminal Blocks ST ...-QUATTRO The double connection of ST...-QUATTRO allows four conductors to be connected on one potential. The QUATTRO variants can therefore be used as compact power distributors. The FBS plug-in bridge system allows bridging any number of terminal blocks and thus achieves further power distribution. Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com Local Contact: www.phoenixcontact.com/salesnetwork Four-Conductor Spring Cage Terminal Block ST 1,5-QUATTRO (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] IEC 60 947-7-1 0.08-1.5 0.08-1.5 28-16 17.5* 500 EN 50 019** 0.08-1.5 0.08-1.5 28-16 17.5* 420 ** EU certificate of design approval no.: KEMA 00ATEX2129U 1) 1) For installation notes and the use of accessories for EEx e applications see Catalog CLIPLINE. * The max. load current must not be exceeded by the total current of all connected conductors. u P F KEMA Technical data Spring cage terminal block, for mounting on 3 gray blue terminal width 4.2 terminal width 4.2 Type Order No. Pcs. Pkt. ST 1,5-QUATTRO ST 1,5-QUATTRO BU 30 31 18 6 30 31 19 9 50 50 (1) End cover gray D-ST 2,5-QUATTRO 30 30 51 4 50 (2) Segment cover, for covering projecting terminal segments gray DS-ST 2,5 30 36 60 2 10 ISH 1,5/0,2 ISH 1,5/0,5 32 06 13 1 30 31 03 4 50 50 30 30 11 6 30 30 12 9 30 30 13 2 30 30 14 5 30 30 15 8 30 30 35 2 50 50 50 50 10 10 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 0.25-0.5 mm2 gray (4) Plug-in bridge, for cross-connections in the terminal center 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-4 FBS 3-4 FBS 4-4 FBS 5-4 FBS 10-4 FBS 20-4 Imax.: 17.5 A 17.5 A 17.5 A 17.5 A 17.5 A 17.5 A (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP ST-QUATTRO 30 30 81 5 50 (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 (7) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks WST 1,5 30 30 95 8 50 (8) Screwdriver, for actuating the tension spring SZF 0 - 0,4 x 2,5 12 04 50 4 10 (9) Zack marker sheet, flat, 100-section, for labeling the outer marker grooves white ZBF 4:UNPRINTED 08 08 58 7 10 ZB 4:UNPRINTED 08 05 00 1 10 (10) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges white Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 2 of 10 4.2 / 72 / 2.2 36.5 / 44 17.5 / 1.5 6/3 III / I 0.25 - 1.5 0.25 - 1.5 0.5 10 A1 PA V0 – – Four-Conductor Spring Cage Ground Terminal Block ST 1,5-QUATTRO-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.08-1.5 0.08-1.5 28-16 EN 50 019* 0.08-1,5 0.08-1.5 28-16 * EU certificate of design approval no.: KEMA 00ATEX2129U 1) 1) For installation notes and the use of accessories for EEx e applications see Catalog CLIPLINE. The current carrying capacity of the mounting rails should be observed. u P F KEMA Technical data Spring cage ground terminal block, green-yellow for mounting on 3 terminal width 4.2 Type Order No. Pcs. Pkt. ST 1,5-QUATTRO-PE 30 31 20 9 50 (1) End cover gray D-ST 2,5-QUATTRO 30 30 51 4 50 (2) Segment cover, for covering projecting terminal segments gray DS-ST 2,5 30 36 60 2 10 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 0.25-0.5 mm2 gray ISH 1,5/0,2 ISH 1,5/0,5 32 06 13 1 30 31 03 4 50 50 (4) Screwdriver, for actuating the tension spring SZF 0 - 0,4 x 2,5 12 04 50 4 10 white ZBF 4:UNPRINTED 08 08 58 7 10 white ZB 4:UNPRINTED 08 05 00 1 10 (5) Zack strip, flat, for labeling the outer marker grooves (6) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 3 of 10 4.2 / 72 / 2.2 36.5 / 44 – 6/3 III / I 0.25 - 1.5 0.25 - 1.5 0.5 10 A1 PA V0 – – Four-Conductor Spring Cage Terminal Block ST 2,5-QUATTRO (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] IEC 60 947-7-1 0.08-4 0.08-2.5 28-12 28* 800 EN 50 019** 0.08-4 0.08-2.5 28-12 24/21* 550 ** EU certificate of design approval no.: KEMA 00ATEX2052U 1) 1) For installation notes and the use of accessories for EEx e applications see Catalog CLIPLINE. * The max. load current must not be exceeded by the total current of all connected conductors. u P F KEMA Technical data Spring cage terminal block, for mounting on 3 Type Order No. Pcs. Pkt. ST 2,5-QUATTRO ST 2,5-QUATTRO BU 30 31 30 6 30 31 31 9 50 50 gray D-ST 2,5-QUATTRO 30 30 51 4 50 gray DS-ST 2,5 30 36 60 2 10 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 gray blue terminal width 5.2 terminal width 5.2 (1) End cover (2) Segment cover, for covering projecting terminal segments (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 0.25-0.5 mm2 gray black 0.75-1 mm2 (4) Plug-in bridge, for cross-connections in the terminal center 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP ST-QUATTRO 30 30 81 5 50 (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 white ZBF 5:UNPRINTED 08 08 64 2 10 white ZB 5:UNPRINTED 10 50 00 4 10 (7) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (8) Reducing plug (9) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks (10) Screwdriver, for actuating the tension spring (11) Zack strip, flat, for labeling the outer marker grooves (12) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 4 of 10 5.2 / 72 / 2.2 36.5 / 44 28 / 4 8/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26 - 12 600 / 20 / 26 - 12 Four-Conductor Spring Cage Ground Terminal Block ST 2,5-QUATTRO-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.08-4 0.08-2.5 28-12 EN 50 019* 0.08-4 0.08-2.5 28-12 * EU certificate of design approval no.: KEMA 00ATEX2052U 1) 1) For installation notes and the use of accessories for EEx e applications see Catalog CLIPLINE. The current carrying capacity of the mounting rails should be observed. u P F KEMA Technical data Spring cage ground terminal block, green-yellow for mounting on 3 terminal width 5.2 Type Order No. Pcs. Pkt. ST 2,5-QUATTRO-PE 30 31 32 2 50 (1) End cover gray D-ST 2,5-QUATTRO 30 30 51 4 50 (2) Segment cover, for covering projecting terminal segments gray DS-ST 2,5 30 36 60 2 10 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 gray 0.25-0.5 mm2 black 0.75-1 mm2 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 (4) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 12 04 51 7 10 white ZBF 5:UNPRINTED 08 08 64 2 10 white ZB 5:UNPRINTED 10 50 00 4 10 (5) Zack strip, flat, for labeling the outer marker grooves (6) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 5 of 10 5.2 / 72 / 2.2 36.5 / 44 – 8/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – / – / 26 - 12 – / – / 26 - 12 Four-Conductor Spring Cage Terminal Blocks ST 4-QUATTRO (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] IEC 60 947-7-1 0.08-6 0.08-4 28-10 40* 800 EN 50 019** 0.08-6 0.08-4 28-10 34/25* 550 ** EU certificate of design approval no.: KEMA 00ATEX2129U 1) 1) For installation notes and the use of accessories for EEx e applications see Catalog CLIPLINE. * The max. load current must not be exceeded by the total current of all connected conductors. u P F KEMA Technical data Spring cage terminal block, for mounting on 3 gray blue terminal width 6.2 terminal width 6.2 Type Order No. Pcs. Pkt. ST 4-QUATTRO ST 4-QUATTRO BU 30 31 44 5 30 31 45 8 50 50 (1) End cover gray D-ST 4-QUATTRO 30 30 52 7 50 (2) Segment cover, for covering projecting terminal segments gray DS-ST 4 30 36 61 5 10 ISH 4/0,5 ISH 4/1 30 02 88 5 30 02 89 8 50 50 30 30 33 6 30 30 24 2 30 30 25 5 30 30 34 9 30 30 27 1 30 30 36 5 50 50 50 50 10 10 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 black 0.75-1 mm2 (4) Plug-in bridge, for cross-connections in the terminal center 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-6 FBS 3-6 FBS 4-6 FBS 5-6 FBS 10-6 FBS 20-6 Imax.: 32 A 32 A 32 A 32 A 32 A 32 A (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP ST-QUATTRO 30 30 81 5 50 (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 WST 4 30 30 95 4 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 white ZBF 6:UNPRINTED 08 08 71 0 10 white ZB 6:UNPRINTED 10 51 00 3 10 (7) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (8) Reducing plug (9) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks (10) Screwdriver, for actuating the tension spring (11) Zack strip, flat, for labeling the outer marker grooves (12) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 6 of 10 6.2 / 87 / 2.2 36.5 / 44 40 / 6 8/3 III / I 0.25 - 4 0.25 - 4 0.5 - 1 10 A4 PA V0 – – Four-Conductor Spring Cage Ground Terminal Block ST 4-QUATTRO-PE (IEC) [mm2] rigid solid flexible stranded AWG IEC 60 947-7-2 0.08-6 0.08-4 28-10 EN 50 019* 0,08-6 0,08-4 28-10 * EU certificate of design approval no.: KEMA 00ATEX2129U 1) 1) For installation notes and the use of accessories for EEx e applications see Catalog CLIPLINE. The current carrying capacity of the mounting rails should be observed. u P F KEMA Technical data Spring cage ground terminal block, green-yellow for mounting on 3 terminal width 6.2 Type Order No. Pcs. Pkt. ST 4-QUATTRO-PE 30 31 46 1 50 (1) End cover gray D-ST 4-QUATTRO 30 30 52 7 50 (2) Segment cover, for covering projecting terminal segments gray DS-ST 4 30 36 61 5 10 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 black 0.75-1 mm2 ISH 4/0,5 ISH 4/1 30 02 88 5 30 02 89 8 50 50 (4) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 12 04 51 7 10 white ZBF 6:UNPRINTED 08 08 71 0 10 white ZB 6:UNPRINTED 10 51 00 3 10 (5) Zack strip, flat, for labeling the outer marker grooves (6) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 7 of 10 6.2 / 87 / 2.2 36.5 / 44 – 8/3 III / I 0.25 - 4 0.25 - 4 0.5 - 1 10 A3 PA V0 – – Four-Conductor Spring Cage Terminal Block ST 1,5-QUATTRO-U (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] IEC 60 947-7-1 0.08-1.5 0.08-1.5 28-16 17.5* 500 * The max. load current must not be exceeded by the total current of all connected conductors. Technical data Spring cage terminal block, for mounting on 3 Type Order No. Pcs. Pkt. ST 1,5-QUATTRO-U 30 38 60 0 50 gray D-ST 2,5-QUATTRO 30 30 51 4 50 gray DS-ST 2,5 30 36 60 2 10 ISH 2,5/0,2 ISH 2,5/0,5 30 02 84 3 30 02 85 6 50 50 30 30 11 6 30 30 12 9 30 30 13 2 30 30 14 5 30 30 15 8 30 30 35 2 50 50 50 50 10 10 gray terminal width 4.2 (1) End cover (2) Segment cover, for covering projecting terminal segments (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 gray 0.25-0.5 mm2 (4) Plug-in bridge, for cross-connections in the terminal center 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-4 FBS 3-4 FBS 4-4 FBS 5-4 FBS 10-4 FBS 20-4 Imax.: 17,5 A 17,5 A 17,5 A 17,5 A 17,5 A 17,5 A (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP ST-QUATTRO 30 30 81 5 50 (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 WST 1,5 30 30 95 8 50 SZF 1 - 0,4 x 2,5 12 04 50 4 10 white ZBF 4:UNPRINTED 08 08 58 7 10 white ZB 4:UNPRINTED 08 05 00 1 10 (7) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (8) Reducing plug (9) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks (10) Screwdriver, for actuating the tension spring (11) Zack strip, flat, for labeling the outer marker grooves (12) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 8 of 10 4.2 / 72 / 2.2 36.5 / 44 17.5 / 1.5 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A1 PA V0 – – Four-Conductor Spring Cage Terminal Block ST 2,5-QUATTRO-U (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] IEC 60 947-7-1 0.08-4 0.08-2.5 28-12 28* 800 * The max. load current must not be exceeded by the total current of all connected conductors. Technical data Spring cage terminal block, for mounting on 3 Type Order No. Pcs. Pkt. ST 2,5-QUATTRO-U 30 31 63 6 50 gray D-ST 2,5-QUATTRO 30 30 51 4 50 gray DS-ST 2,5 30 36 60 2 10 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 gray terminal width 5.2 (1) End cover (2) Segment cover, for covering projecting terminal segments (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 gray 0.25-0.5 mm2 black 0.75-1 mm2 (4) Plug-in bridge, for cross-connections in the terminal center 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP ST-QUATTRO 30 30 81 5 50 (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 white ZBF 5:UNPRINTED 08 08 64 2 10 white ZB 5:UNPRINTED 10 50 00 4 10 (7) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (8) Reducing plug (9) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks (10) Screwdriver, for actuating the tension spring (11) Zack strip, flat, for labeling the outer marker grooves (12) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 9 of 10 5.2 / 72 / 2.2 36.5 / 44 28 / 4 8/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – – Four-Conductor Spring Cage Terminal Block ST 4-QUATTRO-U (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] IEC 60 947-7-1 0.08-4 0.08-2.5 28-12 28* 800 * The max. load current must not be exceeded by the total current of all connected conductors. Technical data Spring cage terminal block, for mounting on 3 Type Order No. Pcs. Pkt. ST 4-QUATTRO-U 30 38 63 9 50 gray D-ST 4-QUATTRO 30 30 52 7 50 gray DS-ST 4 30 36 61 5 10 ISH 4/0,5 ISH 4/1 30 02 88 5 30 02 89 8 50 50 30 30 33 6 30 30 24 2 30 30 25 5 30 30 34 9 30 30 27 1 30 30 36 5 50 50 50 50 10 10 gray terminal width 6.2 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections gray Cross section range: 0.25-0.5 mm2 black 0.75-1 mm2 (4) Plug-in bridge, for cross-connections in the terminal center 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-6 FBS 3-6 FBS 4-6 FBS 5-6 FBS 10-6 FBS 20-6 Imax.: 32 A 32 A 32 A 32 A 32 A 32 A (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP ST-QUATTRO 30 30 81 5 50 (6) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 RPS 02 01 64 7 10 WST 4 30 30 95 4 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 white ZBF 6:UNPRINTED 08 08 71 0 10 white ZB 6:UNPRINTED 10 51 00 3 10 (7) 2.3 mm ∅ test connector 1), consisting of metal part and red insulating sleeve (8) Reducing plug (9) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks (10) Screwdriver, for actuating the tension spring (11) Zack strip, flat, for labeling the outer marker grooves (12) Zack strip, 10-section, for labeling in the terminal center and on the plug-in bridges Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current/ cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Capacity connection Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors are available on request. Phoenix Contact page 10 of 10 6.2 / 87 / 2.2 36.5 / 44 40 / 6 8/3 III / I 0.25 - 4 0.25 - 4 0.5 - 1 10 A4 PA V0 – – TNR 5124910/15.05.2003-02 (2) Segment cover, for covering projecting terminal segments  Phoenix Contact 2003 (1) End cover