https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Lever-type fuse terminal block, black, for 6.3 x 32 mm G fuse inserts, with LED for 24 V DC
Why buy this product
An extremely compact design
Test connection on both sides in safety lever
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4017918914219
Weight per Piece (excluding packing)
26.910 g
Custom tariff number
85369095
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
2
Nominal cross section
4 mm²
Color
black
Insulating material
PA
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.6 W
Fuse
G / 6,3 x 32
03/09/2018 Page 1 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Technical data
General
Fuse type
Glass / ceramics / ...
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation
max. 1.6 W (With single arrangement of the fuse terminal block in the
event of overload)
max. 1.6 W (With interconnected arrangement of several fuse terminal
blocks in the event of overload)
max. 4 W (With single arrangement of the fuse terminal block in the event
of a short-circuit)
max. 2.5 W (With interconnected arrangement of several fuse terminal
blocks in the event of a short-circuit)
Maximum current with single arrangement
10 A
LED voltage range
12 V AC/DC ... 30 V AC/DC
LED current range
0.31 mA ... 0.95 mA
Connection in acc. with standard
IEC 60947-7-3
Maximum load current
10 A (the current is determined by the fuse used)
Nominal current IN
10 A
Nominal voltage UN
24 V
Open side panel
No
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
03/09/2018 Page 2 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Technical data
Dimensions
Width
8.2 mm
Length
76.5 mm
Height NS 35/7,5
69 mm
Height NS 35/15
76.5 mm
Connection data
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG min.
28
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1 mm²
sleeve, max.
Connection method
Spring-cage connection
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A4
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-3
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
03/09/2018 Page 3 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141116
eCl@ss 4.1
27141116
eCl@ss 5.0
27141116
eCl@ss 5.1
27141116
eCl@ss 6.0
27141116
eCl@ss 7.0
27141116
eCl@ss 8.0
27141116
eCl@ss 9.0
27141116
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000899
ETIM 4.0
EC000899
ETIM 5.0
EC000899
ETIM 6.0
EC000899
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / KEMA-KEUR / cUL Recognized / GL / IECEE CB Scheme / EAC / EAC / cULus Recognized
Ex Approvals
03/09/2018 Page 4 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
mm²/AWG/kcmil
28-10
Nominal current IN
10 A
Nominal voltage UN
300 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
mm²/AWG/kcmil
28-10
28-10
Nominal current IN
15 A
15 A
Nominal voltage UN
300 V
300 V
KEMA-KEUR
http://www.dekra-certification.com
mm²/AWG/kcmil
0.08-4
Nominal current IN
10 A
Nominal voltage UN
24 V
cUL Recognized
B
C
mm²/AWG/kcmil
28-10
28-10
Nominal current IN
15 A
15 A
Nominal voltage UN
300 V
300 V
http://exchange.dnv.com/tari/
FILE E 60425
2183456.01
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
GL
13631
FILE E 60425
5937008 HH
03/09/2018 Page 5 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Approvals
IECEE CB Scheme
http://www.iecee.org/
mm²/AWG/kcmil
0.08-4
Nominal current IN
10 A
Nominal voltage UN
24 V
NL-23162
EAC
7500651.22.01.00246
EAC
RU CDE.A*30.B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
03/09/2018 Page 6 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
03/09/2018 Page 7 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
Documentation
Mounting material - ST-IL - 3039900
Operating decal for the ST terminal block
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
Jumper
03/09/2018 Page 8 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red
Plug-in bridge - FBS 6-8 - 3032470
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: red
03/09/2018 Page 9 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Plug-in bridge - FBS 10-8 - 3030323
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-8 CT - 3033830
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange
Plug-in bridge - FBS 3-8 CT - 3033831
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange
Plug-in bridge - FBS 4-8 CT - 3033832
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange
Plug-in bridge - FBS 10-8 CT - 3033833
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange
03/09/2018 Page 10 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Plug-in bridge - FBS 2-8 BU - 3032567
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-8 BU - 3032570
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-8 BU - 3032583
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-8 BU - 3032596
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 6-8 BU - 3032677
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue
03/09/2018 Page 11 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Plug-in bridge - FBS 10-8 BU - 3032606
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 2-8 GY - 3032621
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: gray
Plug-in bridge - FBS 3-8 GY - 3032622
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: gray
Plug-in bridge - FBS 4-8 GY - 3032635
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: gray
Plug-in bridge - FBS 5-8 GY - 3032648
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: gray
03/09/2018 Page 12 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Plug-in bridge - FBS 6-8 GY - 3032664
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: gray
Plug-in bridge - FBS 10-8 GY - 3032651
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: gray
Plug-in bridge - FBSR 2-8 - 3033808
Plug-in bridge, pitch: 8.2 mm, width: 14.8 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-8 - 3001597
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-8 - 3000585
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
03/09/2018 Page 13 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Plug-in bridge - FBSR 5-8 - 3033809
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-8 - 3001599
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red
Plug-in bridge - FBSR 16-8 - 3033816
Plug-in bridge, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, color: red
Plug-in bridge - FBSR 1/6/11/14-8 - 3033822
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 14,
color: red
Plug-in bridge - FBSR 1/6/11/16-8 - 3033820
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 6, 11, 16,
color: red
03/09/2018 Page 14 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Plug-in bridge - FBSR 1/7/13/16-8 - 3033821
Plug-in bridge, non-adjacent, pitch: 8.2 mm, width: 129.5 mm, number of positions: 16, pin assignment: 1, 7, 13, 16,
color: red
Labeled terminal marker
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm
03/09/2018 Page 15 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Zack Marker strip, flat - ZBF 8 CUS - 0825030
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm
03/09/2018 Page 16 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Zack Marker strip, flat - ZBF 8,LGS:FORTL.ZAHLEN - 0808804
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 101 110, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm
Marker for terminal blocks - UC-TMF 8 CUS - 0824654
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 8 CUS - 0829672
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
03/09/2018 Page 17 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Partition plate
Partition plate - ATP-QTC TWIN - 3206212
Partition plate, length: 84.4 mm, width: 2 mm, height: 46 mm, color: gray
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Screwdriver - ST-BW - 1207608
Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
Short-circuit connector
Short-circuit connector - FBSRH 2-8 - 3033802
Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
03/09/2018 Page 18 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Short-circuit connector - FBSRH 3-8 - 3033803
Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Short-circuit connector - FBSRH 4-8 - 3033804
Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Terminal marking
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for
terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
03/09/2018 Page 19 / 20
https://www.phoenixcontact.com/us/products/3038765
Fuse modular terminal block - ST 4-HESILED 24 (6,3X32) - 3038765
Accessories
Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm
Marker for terminal blocks - UC-TMF 8 - 0818137
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field
size: 7.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 8 - 0828748
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into flat marker groove, for
terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
03/09/2018 Page 20 / 20
