3040339

ST-COMBI Pluggable Spring Cage Terminal Blocks in ec om co s. nt po ne ST-COMBI Plugs and ST-COMBI Receptacles As with the base terminal blocks, the plugs also offer the perfect solution for every application. The SP 2,5... plugs are designed for the connection of one conductor. The SPB 2,5... plug fulfills the same purpose but also provides an additional bridging facility. The SPDB 2,5... plug is designed for the connection of two conductors and also provides an additional bridging facility. With the receptacles SC 2,5/..., plug-in contacts can be safely accommodated in cable ducts and distributor shafts without using much space. The standard strain relief can also be used. Large-surface labeling makes it possible to clearly identify the plug connection. The integrated test connection makes it possible to test each contact point using a 2.3 mm test plug. m The base terminal blocks of the ST-COMBI series provide solutions for a wide variety of applications. The series includes feed-through terminal blocks with one or two connector entries, four-conductor terminal blocks with two or four connector entries and space-saving double-level terminal blocks also with two connector entries. The same accessories are used for the base terminal blocks as for the ST standard series. Ground terminal blocks with the same shape and the same pitch are available for the various base terminal blocks. Contact is made by simply snapping the terminal block onto the mounting rail. All the requirements of IEC 60 947-7-2 are fulfilled. on l Strain relief PZ/PDZ Strain reliefs are available for the plugs and can be snapped on at the required points as an option. The PZ... strain reliefs for SP... and SPB... plugs are snapped on externally. The PDZ... strain relief for the SPDB plug is snapped on at the plug center. Shield connection PSH PSH... provides a solution for the connection of shielded conductors. PSH... is snapped into PZ... or PRZ after the terminal blocks have been wired and is then permanently secured using a cable tie. The PSH connecting cable is connected to a connector conductor and makes contact directly with the terminal block when inserted. PC coding option Specific connector positions can be defined for all the base terminal blocks using the PC coding star. To do this, the individual branches of the coding star are inserted at the coding position in the base terminal block and the coding lug is removed at the corresponding point of the connector. PZ/PRZ snap-lock fitting The PR... snap-lock fitting can be used for all plug variants. It is snapped into the outside of the plug housing as an option and hooks onto the terminal block housing when the plug is snapped on. PRZ can be used when an application requires strain relief and a snaplock fitting. PRZ is also snapped into the plug housing as an option and offers a combination of snap fitting and strain relief in a single component. Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com Local Contact: www.phoenixcontact.com/salesnetwork Pluggable Spring Cage Terminal Blocks ST 2,5/ 1P (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 u (1) Cover terminal width 5.2 terminal width 5.2 gray (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 0.25-0.5 mm2 gray 2 black 0.75-1 mm 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. ST 2,5/ 1P ST 2,5/ 1P BU 30 40 01 2 30 40 65 6 50 50 D-ST 2,5 30 30 41 7 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 30 72 1 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 ne (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 4 (8) Coding star, with 4 coding pins, for mounting in all base terminal blocks in ec (9) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks om (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, labeling with ZBF 5 po (5) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft Imax.: 24 A 24 A 24 A 24 A 24 A 24 A nt (3) Plug-in bridge, for cross bridging in the terminal center Pcs. Pkt. m gray blue Order No. co Spring cage terminal block, for mounting on 3 Type s. Technical data (10) Screwdriver, for actuating the tension spring white ZBF 5:UNPRINTED 08 08 64 2 10 (12) Zack strip, 10-section, for labeling in the terminal center white ZB 5:UNPRINTED 10 50 00 4 10 on l (11) Zack strip, flat, for labeling the center and outer marker grooves Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V]/[A]/AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors on request. Phoenix Contact page 2 of 27 5.2 / 48.5 / 2.2 36.5 / 44 24 / 4 // 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 Pluggable Spring Cage Terminal Blocks ST 2,5-TWIN/ 1P (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] gray blue (1) Cover terminal width 5.2 terminal width 5.2 gray (2) Cover segment, serves for gray covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned (7) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (8) Modular test plug, labeling with ZBF 5 D-ST 2,5-TWIN 30 30 48 8 50 30 36 60 2 50 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 ATP-ST-TWIN 30 30 78 9 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 WST 2,5 30 30 94 1 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 ne (10) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks (11) Screwdriver, for actuating the tension spring on l 50 50 po in ec (9) Coding star, with 4 coding pins, for mounting in all base terminal blocks 30 42 11 7 30 42 10 4 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 om (6) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft ST 2,5-TWIN/ 1P ST 2,5-TWIN/ 1P BU nt 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick Pcs. Pkt. DS-ST 2,5 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 0.75-1 mm2 black (4) Plug-in bridge, for cross bridging in the terminal center Order No. co Spring cage terminal block, for mounting on 3 Type m Technical data s. Connection data 0.08-4 0.08-2.5 28-12 24* 500 * The max. load current must not be exceeded by the total current of all connected conductors. SZF 1 - 0,6 x 3,5 12 04 51 7 10 (12) Zack strip, flat, for center and external labeling, white ZBF 5:UNPRINTED 08 08 64 2 10 (13) Zack strip, 10-section, for center labeling, white ZB 5:UNPRINTED 10 50 00 4 10 Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors on request. Phoenix Contact page 3 of 27 5.2 / 60.5 / 2.2 36.5 / 44 24 / 4 // – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 applied for applied for Pluggable Spring Cage Terminal Blocks ST 2,5-QUATTRO/ 2P (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] Connection data 0.08-4 0.08-2.5 28-12 24* 500 * The max. load current must not be exceeded by the total current of all connected conductors. gray blue (1) Cover terminal width 5.2 terminal width 5.2 gray (2) Cover segment, serves for gray covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned (7) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (8) Modular test plug, labeling with ZBF 5 D-ST 2,5-QUATTRO/ 2P 30 40 08 3 50 30 41 01 1 50 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 ATP-ST QUATTRO 30 30 81 5 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 ne (10) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks (11) Screwdriver, for actuating the tension spring on l 50 50 po in ec (9) Coding star, with 4 coding pins, for mounting in all base terminal blocks 30 40 03 8 30 40 66 9 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 om (6) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft ST 2,5-QUATTRO/ 2P ST 2,5-QUATTRO/ 2P BU nt 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick Pcs. Pkt. DS-ST 2,5/P (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 0.75-1 mm2 black (4) Plug-in bridge, for cross bridging in the terminal center Order No. co Spring cage terminal block, for mounting on 3 Type m Technical data s. u (12) Zack strip, flat, for center and external labeling , white ZBF 5:UNPRINTED 08 08 64 2 10 (13) Zack strip, 10-section, for center labeling, white ZB 5:UNPRINTED 10 50 00 4 10 Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1) Further colors on request. Phoenix Contact page 4 of 27 5.2 / 81 / 2.2 36.5 / 44 24 / 4 // – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 Pluggable Spring Cage Terminal Blocks STTB 2,5/ 2P (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 u (1) Cover terminal width 5.2 terminal width 5.2 gray (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. 50 50 D-STTB 2,5/ 2P 30 40 09 6 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 30 74 7 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBF 5:UNPRINTED 08 08 64 2 10 ne ATP-STTB 4 (8) Coding star, with 4 coding pins, for mounting in all base terminal blocks in ec (9) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks om (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, labeling with ZBF 5 po (5) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft (10) Screwdriver, for actuating the tension spring on l 30 40 05 4 30 40 67 2 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick (11) Zack strip, flat, for labeling the outer marker grooves STTB 2,5/ 2P STTB 2,5/ 2P BU white Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A nt (3) Plug-in bridge, for cross bridging in the terminal center Pcs. Pkt. m gray blue Order No. co Spring cage terminal block, for mounting on 3 Type s. Technical data ) Further colors on request. Phoenix Contact page 5 of 27 5.2 / 71.5 / 2.2 47.5 / 55 24 / 4 // 20 / 2.5 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 Pluggable Spring Cage Terminal Blocks STTB 2,5/ 2P-PV (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] Connection data 0.08-4 0.08-2.5 28-12 24* 500 * The max. load current must not be exceeded by the total current of all connected conductors. u (1) Cover terminal width 5.2 terminal width 5.2 gray (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. 50 50 D-STTB 2,5/ 2P 30 40 09 6 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 30 74 7 50 PAI 4 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBF 5:UNPRINTED 08 08 64 2 10 ne ATP-STTB 4 (8) Coding star, with 4 coding pins, for mounting in all base terminal blocks in ec (9) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks om (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, labeling with ZBF 5 po (5) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft (10) Screwdriver, for actuating the tension spring on l 30 40 07 0 30 40 68 5 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick (11) Zack strip, flat, for labeling the outer marker grooves STTB 2,5/ 2P-PV STTB 2,5/ 2P-PV BU white Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum // Rated data [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A nt (3) Plug-in bridge, for cross bridging in the terminal center Pcs. Pkt. m gray blue Order No. co Spring cage terminal block, for mounting on 3 Type s. Technical data ) Further colors on request. Phoenix Contact page 6 of 27 5.2 / 71.5 / 2.2 47.5 / 55 24 / 4 // 20 / 2.5 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 Pluggable Spring Cage Terminal Blocks ST 2,5/ 2P flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 Technical data Order No. Pcs. Pkt. ST 2,5/ 2P ST 2,5/ 2P BU 30 42 13 3 30 42 09 4 50 50 gray D-ST 2,5 30 30 41 7 50 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 30 72 1 50 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 ZB 5:UNPRINTED 10 50 00 4 10 Spring cage terminal block, for mounting on 3 gray blue (1) Cover (2) Plug-in bridge, for cross bridging in the terminal center terminal width 5.2 terminal width 5.2 ATP-ST 4 (4) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft PAI 4 ne po (5) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (6) Modular test plug, labeling with ZBF 5 om (7) Coding star, with 4 coding pins, for mounting in all base terminal blocks (8) Zack strip, for labeling the outer marker grooves, nt (3) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick white on l in ec Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A m Type co Connection data rigid solid s. (IEC) [mm2] ) Further colors on request. Phoenix Contact page 7 of 27 5.2 / 48.5 / 2.2 36.5 / 44 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 – – PA V0 applied for applied for Pluggable Spring Cage Terminal Blocks ST 2,5-QUATTRO/ 4P (IEC) [mm2] rigid solid flexible stranded AWG I [A] U [V] Connection data 0.08-4 0.08-2.5 28-12 24* 500 * The max. load current must not be exceeded by the total current of all connected conductors. (1) Cover terminal width 5.2 terminal width 5.2 gray (2) Cover segment, serves for gray covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned 50 50 D-ST 2,5-QUATTRO/4P 30 42 17 5 50 30 42 33 7 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 30 81 5 50 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 ZB 5:UNPRINTED 10 50 00 4 10 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ne ATP-ST QUATTRO (5) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft po PAI 4 om (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, labeling with ZBF 5 white in ec (9) Zack strip, for labeling the outer marker grooves, 30 42 15 9 30 42 08 1 DS-ST 2,5/2P 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (8) Coding star, with 4 coding pins, for mounting in all base terminal blocks ST 2,5-QUATTRO/ 4P ST 2,5-QUATTRO/ 4P BU on l Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A nt (3) Plug-in bridge, for cross bridging in the terminal center Pcs. Pkt. co gray blue Order No. s. Spring cage terminal block, for mounting on 3 Type m Technical data ) Further colors on request. Phoenix Contact page 8 of 27 5.2 / 89.5 / 2.2 36.5 / 44 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 – – PA V0 applied for applied for Pluggable Spring Cage Ground Terminal Blocks ST 2,5/ 1P-PE IEC [mm2] rigid solid flexible stranded AWG Connection data 0.08-4 0.08-2.5 28-12 Observe the current carrying capacity of the mounting rails. u gray (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm (3) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ST 2,5/ 1P-PE 30 40 02 5 50 D-ST 2,5 30 30 41 7 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 72 1 50 30 40 58 8 50 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBF 5:UNPRINTED 08 08 64 2 10 ZB 5:UNPRINTED 10 50 00 4 10 ATP-ST 4 (4) Coding star, with 4 coding pins, for mounting in all base terminal blocks m (1) Cover terminal width 5.2 Pcs. Pkt. co green-yellow Order No. ne PC nt Spring cage terminal block, for mounting on 3 Type s. Technical data (5) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks (6) Screwdriver, for actuating the tension spring white (8) Zack strip, 10-section, for labeling in the terminal center white om (7) Zack strip, flat, for labeling the outer marker grooves po WST 2,5 on l in ec Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 9 of 27 5.2 / 48.5 / 2.2 36.5 / 44 – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – / – / 26-12 – / – / 26-12 Pluggable Spring Cage Ground Terminal Blocks ST 2,5-TWIN/ 1P-PE IEC [mm2] rigid solid flexible stranded AWG green-yellow (1) Cover terminal width 5.2 gray (2) Cover segment, serves for gray covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned 30 42 12 0 50 D-ST 2,5-TWIN 30 30 48 8 50 30 36 60 2 50 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 ATP-ST-TWIN 30 30 78 9 50 PC 30 40 58 8 50 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 po ne FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (7) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks in ec om (6) Coding star, with 4 coding pins, for mounting in all base terminal blocks (8) Screwdriver, for actuating the tension spring ST 2,5-TWIN/ 1P-PE nt 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (5) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick Pcs. Pkt. DS-ST 2,5 (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 black 0.75-1 mm2 (4) Plug-in bridge, for cross bridging in the terminal center Order No. co Spring cage terminal block, for mounting on 3 Type m Technical data s. Connection data 0.08-4 0.08-2.5 28-12 Observe the current carrying capacity of the mounting rails. white ZBF 5:UNPRINTED 08 08 64 2 10 (10) Zack strip, 10-section, for labeling in the terminal center white ZB 5:UNPRINTED 10 50 00 4 10 on l (9) Zack strip, flat, for labeling the outer marker grooves Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 10 of 27 5.2 / 60.5 / 2.2 36.5 / 44 – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 applied for applied for Pluggable Spring Cage Ground Terminal Blocks ST 2,5-QUATTRO/ 2P-PE IEC [mm2] rigid solid flexible stranded AWG Connection data 0.08-4 0.08-2.5 28-12 Observe the current carrying capacity of the mounting rails. u (1) Cover terminal width 5.2 gray (2) Cover segment, serves for gray covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned ST 2,5-QUATTRO/ 2P-PE 30 40 04 1 50 D-ST 2,5-QUATTRO/ 2P 30 40 08 3 50 30 41 01 1 50 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 81 5 50 30 40 58 8 50 WST 2,5 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBF 5:UNPRINTED 08 08 64 2 10 ZB 5:UNPRINTED 10 50 00 4 10 DS-ST 2,5/P ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 nt (3) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 black 0.75-1 mm2 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ne ATP-ST QUATTRO (5) Coding star, with 4 coding pins, for mounting in all base terminal blocks PC om po (6) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks (7) Screwdriver, for actuating the tension spring Pcs. Pkt. co green-yellow Order No. s. Spring cage terminal block, for mounting on 3 Type white (9) Zack strip, 10-section, for labeling in the terminal center white in ec (8) Zack strip, flat, for labeling the outer marker grooves m Technical data on l Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 11 of 27 5.2 / 81 / 2.2 36.5 / 44 – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – / – / 26-12 – / – / 26-12 Pluggable Spring Cage Ground Terminal Blocks STTB 2,5/ 2P-PE (IEC) [mm2] rigid solid flexible stranded AWG Connection data 0.08-4 0.08-2.5 28-12 Observe the current carrying capacity of the mounting rails. u gray (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm (3) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick 30 40 06 7 50 D-STTB 2,5/ 2P 30 40 09 6 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 30 30 74 7 50 30 40 58 8 50 30 30 94 1 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBF 5:UNPRINTED 08 08 64 2 10 ATP-STTB 4 (4) Coding star, with 4 coding pins, for mounting in all base terminal blocks ne PC (5) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks om white po WST 2,5 (6) Screwdriver, for actuating the tension spring (7) Zack strip, flat, for labeling the outer marker grooves STTB 2,5/ 2P-PE m (1) Cover terminal width 5.2 Pcs. Pkt. co green-yellow Order No. nt Spring cage terminal block, for mounting on 3 Type s. Technical data on l in ec Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 12 of 27 5.2 / 71.5 / 2.2 47.5 / 55 – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 – / – / 26-12 – / – / 26-12 Pluggable Spring Cage Ground Terminal Blocks ST 2,5/ 2P-PE (IEC) [mm2] rigid solid flexible stranded AWG Connection data 0.08-4 0.08-2.5 28-12 Observe the current carrying capacity of the mounting rails. Technical data Pcs. Pkt. ST 2,5/ 2P-PE 30 42 14 6 50 gray D-ST 2,5 30 30 41 7 50 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 30 72 1 50 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 ZB 5:UNPRINTED 10 50 00 4 10 (1) Cover (2) Plug-in bridge, for cross bridging in the terminal center terminal width 5.2 ATP-ST 4 (4) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft PAI 4 ne po (5) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (6) Modular test plug, labeling with ZBF 5 om (7) Coding star, with 4 coding pins, for mounting in all base terminal blocks (8) Zack strip, for labeling the outer marker grooves, nt (3) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick co green-yellow m Order No. s. Spring cage terminal block, for mounting on 3 Type white on l in ec Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors on request. Phoenix Contact page 13 of 27 5.2 / 48.5 / 2.2 36.5 / 44 – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 – – PA V0 applied for applied for Pluggable Spring Cage Ground Terminal Blocks ST 2,5-QUATTRO/ 4P-PE IEC [mm2] rigid solid flexible stranded AWG Connection data 0.08-4 0.08-2.5 28-12 Observe the current carrying capacity of the mounting rails. (1) Cover terminal width 5.2 gray (2) Cover segment, serves for gray covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned 50 D-ST 2,5-QUATTRO/4P 30 42 17 5 50 30 42 33 7 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 30 81 5 50 30 30 92 5 10 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 PC 30 40 58 8 50 ZB 5:UNPRINTED 10 50 00 4 10 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ne ATP-ST QUATTRO (5) Test adapter, for 4 mm ∅ PS test plug and 4 mm ∅ safety test plugs, makes contact in the bridge shaft po PAI 4 om (6) 2.3 mm ∅ test plug 1), consisting of metal part and red insulating sleeve (7) Modular test plug, labeling with ZBF 5 white in ec (9) Zack strip, for labeling the outer marker grooves 30 42 16 2 DS-ST 2,5/2P 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. (8) Coding star, with 4 coding pins, for mounting in all base terminal blocks ST 2,5-QUATTRO/ 4P-PE nt (3) Plug-in bridge, for cross bridging in the terminal center Pcs. Pkt. co green-yellow Order No. s. Spring cage terminal block, for mounting on 3 Type on l Dimensions Width / length / end cover width [mm] Height (NS 35/7,5 / NS 35/15) [mm] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 m Technical data ) Further colors on request. Phoenix Contact page 14 of 27 5.2 / 89.5 / 2.2 36.5 / 44 – 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 – – PA V0 applied for applied for ST-COMBI Receptacles SC 2,5/... U [V] 0.08-4 0.08-2.5 28-12 24 500 Technical data ST-COMBI receptacle, single, not bridgeable, 5.2 mm wide gray gray gray gray gray gray gray gray gray gray gray gray gray gray 2-pos. 3-pos. 4-pos. 5-pos. 6-pos. 7-pos. 8-pos. 9-pos. 10-pos. 11-pos. 12-pos. 13-pos. 14-pos. 15-pos. (1) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm black black white Pcs. Pkt. SC 2,5/2 SC 2,5/3 SC 2,5/4 SC 2,5/5 SC 2,5/6 SC 2,5/7 SC 2,5/8 SC 2,5/9 SC 2,5/10 SC 2,5/11 SC 2,5/12 SC 2,5/13 SC 2,5/14 SC 2,5/15 30 41 31 2 30 42 26 9 30 42 27 2 30 42 28 5 30 42 29 8 30 41 36 7 30 42 30 8 30 41 38 3 30 42 31 1 30 41 40 6 30 42 32 4 30 41 42 2 30 41 43 5 30 41 44 8 50 50 50 50 25 25 25 25 25 10 10 10 10 10 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 PDZ/2 PDZ/4 30 40 56 2 30 40 57 5 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 om (3) Zack strip, flat, for labeling the outer marker grooves 2-pos. 4-pos. Order No. po (2) Strain relief, Type m I [A] co AWG s. flexible stranded nt Connection data rigid solid ne (IEC) [mm2] on l in ec Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 15 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 applied for applied for ST-COMBI Receptacles SC 2,5-RZ/... U [V] 0.08-4 0.08-2.5 28-12 24 500 Technical data ST-COMBI receptacle, single, not bridgeable, 5.2 mm wide with engagement pin gray gray gray gray gray gray gray gray gray gray gray gray gray gray 2-pos. 3-pos. 4-pos. 5-pos. 6-pos. 7-pos. 8-pos. 9-pos. 10-pos. 11-pos. 12-pos. 13-pos. 14-pos. 15-pos. (1) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm black black white Pcs. Pkt. SC 2,5-RZ/2 SC 2,5-RZ/3 SC 2,5-RZ/4 SC 2,5-RZ/5 SC 2,5-RZ/6 SC 2,5-RZ/7 SC 2,5-RZ/8 SC 2,5-RZ/9 SC 2,5-RZ/10 SC 2,5-RZ/11 SC 2,5-RZ/12 SC 2,5-RZ/13 SC 2,5-RZ/14 SC 2,5-RZ/15 30 41 51 6 30 41 52 9 30 41 53 6 30 41 54 5 30 41 55 8 30 41 56 1 30 41 57 4 30 41 59 0 30 41 58 7 30 41 60 0 30 41 61 3 30 41 62 6 30 41 63 9 30 41 64 2 50 50 50 50 25 25 25 25 25 10 10 10 10 10 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 PDZ/2 PDZ/4 30 40 56 2 30 40 57 5 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 om (3) Zack strip, flat, for labeling the outer marker grooves 2-pos. 4-pos. Order No. po (2) Strain relief, Type m I [A] co AWG s. flexible stranded nt Connection data rigid solid ne (IEC) [mm2] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG in ec 24 / 4 6/3 III / I on l 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 3,5 applied for applied for 5,2 n x 5,2 Drilling plan: SC 2,5-RZ... Example: 1 x SC 2,5-RZ/6 Plate thickness: 0.8-1.5 mm Phoenix Contact page 16 of 27 ST-COMBI Receptacles for Self-Assembly co SC 2,5/1-L BU SC 2,5/1-L GNYE D-SC 2,5 s. SC 2,5/1-L m : on l in ec om po ne Structure of a receptacle For multi-position receptacles, the corresponding number of one-position receptacle elements and a cover are required. The individual receptacle elements and the cover are connected by pushing them together and are held by the engagement pins. When mounting receptacles with engagement pins, an element with an engagement pin should be mounted at the beginning and end of the receptacle. For longer receptacles, we recommend that an element with engagement pin is used after at least every 6th position. To ensure a secure fit, the bore holes must be burr-free. Example for the structure of a 6-position receptacle: nt With the ST-COMBI receptacles for self-assembly, we offer a solution for every task and it can be implemented by the user himself. The receptacle is assembled directly on site by snapping together oneposition receptacle elements. For receptacle types SC 2,5/1-L and SC 2,5-RZ/1-L, one-position base versions are available in gray, blue and green-yellow. Phoenix Contact page 17 of 27 ST-COMBI Receptacles SC 2,5/1-L AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 Technical data ST-COMBI receptacle, single, not bridgeable, 5.2 mm wide gray blue green-yellow (1) Cover, 1-pos. 1-pos. 1-pos. gray Type Order No. Pcs. Pkt. SC 2,5/1-L SC 2,5/1-L BU SC 2,5/1-L GNYE 30 42 18 8 30 42 19 1 30 42 20 1 50 50 50 D-SC 2,5 30 42 24 3 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 (3) 2.3 mm Ø test plugs 1), consisting of metal part and red insulating sleeve MPS-RD 02 01 55 3 10 WST 2,5 30 30 94 1 50 (6) Screwdriver, for actuating the tension spring om white 2-pos. 4-pos. 30 40 56 2 30 40 57 5 50 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBF 5:UNPRINTED 08 08 64 2 10 PDZ/2 PDZ/4 po black black (7) Zack strip, flat, for labeling the outer marker grooves 50 50 50 nt (4) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks (5) Strain relief, 30 02 84 3 30 02 85 6 30 02 86 9 ne (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm m flexible stranded co Connection data rigid solid s. (IEC) [mm2] on l in ec Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG 1 ) Further colors on request. Phoenix Contact page 18 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 applied for applied for ST-COMBI Receptacles SC 2,5-RZ/1-L AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 Technical data ST-COMBI receptacle, single, not bridgeable, 5.2 mm wide with engagement pin gray blue green-yellow (1) Cover, 1-pos. 1-pos. 1-pos. gray Type Order No. Pcs. Pkt. SC 2,5-RZ/1-L SC 2,5-RZ/1-L BU SC 2,5-RZ/1-L GNYE 30 42 21 4 30 42 22 7 30 42 23 0 50 50 50 D-SC 2,5 30 42 24 3 50 ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 (3) 2.3 mm Ø test plugs 1), consisting of metal part and red insulating sleeve MPS-RD 02 01 55 3 10 WST 2,5 30 30 94 1 50 (6) Screwdriver, for actuating the tension spring om white 2-pos. 4-pos. 30 40 56 2 30 40 57 5 50 50 SZF 1 - 0,6 x 3,5 12 04 51 7 10 ZBF 5:UNPRINTED 08 08 64 2 10 PDZ/2 PDZ/4 po black black (7) Zack strip, flat, for labeling the outer marker grooves 50 50 50 nt (4) Warning cover, for the actuating ducts of the "mini-spring" ST spring cage terminal blocks (5) Strain relief, 30 02 84 3 30 02 85 6 30 02 86 9 ne (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 2 black 0.75-1 mm m flexible stranded co Connection data rigid solid s. (IEC) [mm2] Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG in ec 24 / 4 6/3 III / I on l 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 ) Further colors on request. 3,5 1 applied for applied for 5,2 n x 5,2 Drilling plan: SC 2,5-RZ... Example: 6 x SC 2,5-RZ/1-L Plate thickness: 0.8-1.5 mm Phoenix Contact page 19 of 27 ST-COMBI Plugs SP 2,5 (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 u black black (3) Snap-lock fitting, for all plugs 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 PZ/2 PZ/4 30 40 62 7 30 40 64 3 50 50 m ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 1-pos. 2-pos. PR PR/2 30 40 55 9 30 40 63 0 50 50 orange 2-pos. PRZ 30 40 61 4 50 PSH 3-6 PSH 5-10 30 40 59 1 30 40 60 1 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 (5) Shielding, for mounting on PZ/... and PRZ, for shielded conductors with 3-6 mm ∅ 5-10 mm ∅ white on l (6) Zack strip, flat, for labeling the outer marker grooves 50 50 50 50 50 25 25 25 25 25 10 10 10 10 10 50 50 orange orange in ec (4) Snap-lock fitting and strain relief, for all connectors 2-pos. 4-pos. om (2) Strain relief, 30 40 25 8 30 40 26 1 30 40 27 4 30 40 28 7 30 40 29 0 30 40 30 0 30 40 31 3 30 40 32 6 30 40 33 9 30 40 34 2 30 40 35 5 30 40 36 8 30 40 37 1 30 40 38 4 30 40 39 7 30 40 69 8 30 40 70 8 po (1) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 black 0.75-1 mm2 SP 2,5/1 SP 2,5/2 SP 2,5/3 SP 2,5/4 SP 2,5/5 SP 2,5/6 SP 2,5/7 SP 2,5/8 SP 2,5/9 SP 2,5/10 SP 2,5/11 SP 2,5/12 SP 2,5/13 SP 2,5/14 SP 2,5/15 SP 2,5/1 BU SP 2,5/1 GNYE co 1-pos. 2-pos. 3-pos. 4-pos. 5-pos. 6-pos. 7-pos. 8-pos. 9-pos. 10-pos. 11-pos. 12-pos. 13-pos. 14-pos. 15-pos. 1-pos. 1-pos. Pcs. Pkt. s. gray gray gray gray gray gray gray gray gray gray gray gray gray gray gray blue green-yellow Order No. nt ST-COMBI plug, single, not bridgeable, 5.2 mm wide Type ne Technical data Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 20 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 ST-COMBI Plugs SPB 2,5 (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 u (1) Plug-in bridge, for cross bridging in the bridge shaft 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 om co m 50 50 50 50 10 10 PZ/2 PZ/4 30 40 62 7 30 40 64 3 50 50 orange orange 1-pos. 2-pos. PR PR/2 30 40 55 9 30 40 63 0 50 50 orange 2-pos. PRZ 30 40 61 4 50 PSH 3-6 PSH 5-10 30 40 59 1 30 40 60 1 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 (6) Shielding, for mounting on PZ/... and PRZ, for shielded conductors with (7) Zack strip, flat, for labeling the outer marker grooves 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A 2-pos. 4-pos. on l (5) Snap-lock fitting and strain relief, for all plugs 50 50 50 50 50 25 25 25 25 25 10 10 10 10 10 50 50 black black in ec (4) Snap-lock fitting, for all plugs 30 40 10 6 30 40 11 9 30 40 12 2 30 40 13 5 30 40 14 3 30 40 15 1 30 40 16 4 30 40 17 7 30 40 18 0 30 40 19 3 30 40 20 3 30 40 21 6 30 40 22 9 30 40 23 2 30 40 24 5 30 40 72 4 30 40 71 1 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 black 0.75-1 mm2 (3) Strain relief, SPB 2,5/1 SPB 2,5/2 SPB 2,5/3 SPB 2,5/4 SPB 2,5/5 SPB 2,5/6 SPB 2,5/7 SPB 2,5/8 SPB 2,5/9 SPB 2,5/10 SPB 2,5/11 SPB 2,5/12 SPB 2,5/13 SPB 2,5/14 SPB 2,5/15 SPB 2,5/1 BU SPB 2,5/1 GNYE s. 1-pos. 2-pos. 3-pos. 4-pos. 5-pos. 6-pos. 7-pos. 8-pos. 9-pos. 10-pos. 11-pos. 12-pos. 13-pos. 14-pos. 15-pos. 1-pos. 1-pos. Pcs. Pkt. ne gray gray gray gray gray gray gray gray gray gray gray gray gray gray gray blue green-yellow Order No. po ST-COMBI plug, single, bridgeable, 5.2 mm wide Type nt Technical data 3-6 mm ∅ 5-10 mm ∅ white Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 21 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 ST-COMBI Plugs SPDB 2,5 (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 u (1) Plug-in bridge, for cross bridging in the bridge shaft 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 30 02 84 3 30 02 85 6 30 02 86 9 50 50 50 om co m 50 50 50 50 10 10 PDZ/2 PDZ/4 30 40 56 2 30 40 57 5 50 50 orange orange 1-pos. 2-pos. PR PR/2 30 40 55 9 30 40 63 0 50 50 orange 2-pos. PRZ 30 40 61 4 50 PSH 3-6 PSH 5-10 30 40 59 1 30 40 60 1 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 (6) Shielding, for mounting on PZ/... and PRZ, for shielded conductors with (7) Zack strip, flat, for labeling the outer marker grooves 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A 2-pos. 4-pos. on l (5) Snap-lock fitting and strain relief, for all plugs 50 50 50 50 50 25 25 25 25 25 10 10 10 10 10 50 50 black black in ec (4) Snap-lock fitting, for all plugs 30 40 40 7 30 40 41 0 30 40 42 3 30 40 43 6 30 40 44 9 30 40 45 2 30 40 46 5 30 40 47 8 30 40 48 1 30 40 49 4 30 40 50 4 30 40 51 7 30 40 52 0 30 40 53 3 30 40 54 6 30 40 73 7 30 40 74 0 FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white gray 0.25-0.5 mm2 black 0.75-1 mm2 (3) Strain relief, SPDB 2,5/1 SPDB 2,5/2 SPDB 2,5/3 SPDB 2,5/4 SPDB 2,5/5 SPDB 2,5/6 SPDB 2,5/7 SPDB 2,5/8 SPDB 2,5/9 SPDB 2,5/10 SPDB 2,5/11 SPDB 2,5/12 SPDB 2,5/13 SPDB 2,5/14 SPDB 2,5/15 SPDB 2,5/1 BU SPDB 2,5/1 GNYE s. 1-pos. 2-pos. 3-pos. 4-pos. 5-pos. 6-pos. 7-pos. 8-pos. 9-pos. 10-pos. 11-pos. 12-pos. 13-pos. 14-pos. 15-pos. 1-pos. 1-pos. Pcs. Pkt. ne gray gray gray gray gray gray gray gray gray gray gray gray gray gray gray blue green-yellow Order No. po ST-COMBI plug, double, bridgeable, 5.2 mm wide Type nt Technical data 3-6 mm ∅ 5-10 mm ∅ white Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 22 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 ST-COMBI Plugs for Self-Assembly co m Structure of a plug For each multiple-position plug, a left element (at the beginning of the plug) and a right element (at the end of the plug) is required. How many middle elements need to be inserted depends on the number of positions of the desired plug. The individual elements are connected by pushing them together and are held by the engagement pins. Example for the structure of a 6-position plug: nt s. Withden Mit theselbstkonfektionierbaren ST-COMBI plugs for self-assembly, ST-COMBI-Steckern we offer a ist für jede solution for Aufgabenstellung every task and it can einebeLösung implemented vorhanden, by the die vom user himself. Anwender The plug selbst is assembled realisiert werden directlykann. on site Der by Stecker wird snapping together hierbeione-position direkt vor Ort plug anwendungsgerecht elements. aus einpoligen Steckerelementen zusammengerastet. For plug types SP 2,5…, SPB 2,5… and SPDB 2,5…, Für one-position die vorhandenen base versions Steckertypen are available SP 2,5…, in gray, blue SPB and green-yellow: 2,5… und SPDB 2,5… stehen jeweils einpolige Grundvarianten in den Farben grau, blau, grün-gelb zur Verfügung: SPB 2,5-L SPB 2,5-M om po ne left element SP…2,5-L left side: smooth right side: open on l in ec middle element SP…2,5-M left side: engagement pin right side: open right element SP…2,5-R left side: engagement pin right side: end cover In this view, the open side of the plug is on the right. The different color versions can be combined with each other in any order for the various plug types. Phoenix Contact page 23 of 27 SPB 2,5-M BU SPB 2,5-R GNYE Plugs for Self-Assembly SP 2,5/1… (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.28-4 0.08-2.5 28-12 24 500 u Technical data Type Order No. Pcs. Pkt. gray blue green-yellow SP 2,5/1-L SP 2,5/1-L BU SP 2,5/1-L GNYE 30 43 01 9 30 43 02 2 30 43 03 5 50 50 50 ST-COMBI plug, single, not bridgeable, 5.2 mm wide, middle element gray blue green-yellow SP 2,5/1-M SP 2,5/1-M BU SP 2,5/1-M GNYE 30 43 04 3 30 43 05 1 30 43 06 4 50 50 50 ST-COMBI plug, single, not bridgeable, 5.2 mm wide, right element gray blue green-yellow SP 2,5/1-R SP 2,5/1-R BU SP 2,5/1-R GNYE 30 43 07 7 30 43 08 0 30 43 09 3 50 50 50 30 40 62 7 30 40 64 3 50 50 30 40 55 9 30 40 63 0 50 50 30 40 61 4 50 PSH 3-6 PSH 5-10 30 40 59 1 30 40 60 1 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 1-pos. 2-pos. PR PR/2 orange 2-pos. PRZ (4) Shielding, for mounting on PZ/... and PRZ, for shielded conductors with (5) Zack marker sheet, flat, for labeling the outer marker grooves 3-6 mm ∅ 5-10 mm ∅ white co orange orange s. PZ/2 PZ/4 nt (3) Snap-lock fitting and strain relief, for all plugs 2-pos. 4-pos. ne (2) Snap-lock fitting, for all plugs black black po (1) Strain relief, m ST-COMBI plug, single, not bridgeable, 5.2 mm wide, left element on l in ec om Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 24 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 Plugs for Self-Assembly SPB 2,5/1… (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 u Technical data Type Order No. Pcs. Pkt. gray blue green-yellow SPB 2,5/1-L SPB 2,5/1-L BU SPB 2,5/1-L GNYE 30 43 10 3 30 43 11 6 30 43 12 9 50 50 50 ST-COMBI plug, single, bridgeable, 5.2 mm wide, middle element gray blue green-yellow SPB 2,5/1-M SPB 2,5/1-M BU SPB 2,5/1-M GNYE 30 43 13 2 30 43 14 5 30 43 15 8 50 50 50 ST-COMBI plug, single, bridgeable, 5.2 mm wide, right element gray blue green-yellow SPB 2,5/1-R SPB 2,5/1-R BU SPB 2,5/1-R GNYE 30 43 16 1 30 43 17 4 30 43 18 7 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 30 40 62 7 30 40 64 3 50 50 30 40 55 9 30 40 63 0 50 50 PRZ 30 40 61 4 50 PSH 3-6 PSH 5-10 30 40 59 1 30 40 60 1 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 (3) Snap-lock fitting, for all plugs (4) Snap-lock fitting and strain relief, for all plugs 2-pos. 4-pos. orange orange 1-pos. 2-pos. 2-pos. om (5) Shielding, for mounting on PZ/... and PRZ, for shielded conductors with PZ/2 PZ/4 3-6 mm ∅ 5-10 mm ∅ co s. PR PR/2 in ec white Imax.: 24 A 24 A 24 A 24 A 24 A 24 A nt black black orange (6) Zack strip, flat, for labeling the outer marker grooves FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 ne (2) Strain relief, 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. po (1) Plug-in bridge, for cross bridging in the bridge shaft m ST-COMBI plug, single, bridgeable, 5.2 mm wide, left element on l Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 25 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 Plugs for Self-Assembly SPDB 2,5/1… (IEC) [mm2] Connection data rigid solid flexible stranded AWG I [A] U [V] 0.08-4 0.08-2.5 28-12 24 500 u Technical data Type Order No. Pcs. Pkt. gray blue green-yellow SPDB 2,5/1-L SPDB 2,5/1-L BU SPDB 2,5/1-L GNYE 30 43 19 0 30 43 20 0 30 43 21 3 50 50 50 Plug, double, bridgeable, 5.2 mm wide, middle element gray blue green-yellow SPDB 2,5/1-M SPDB 2,5/1-M BU SPDB 2,5/1-M GNYE 30 43 22 6 30 43 23 9 30 43 24 2 50 50 50 Plug, double, bridgeable, 5.2 mm wide, right element gray blue green-yellow SPDB 2,5/1-R SPDB 2,5/1-R BU SPDB 2,5/1-R GNYE 30 43 25 5 30 43 26 8 30 43 27 1 50 50 50 30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6 50 50 50 50 10 10 PDZ/2 PDZ/4 30 40 56 2 30 40 57 5 50 50 PR PR/2 30 40 55 9 30 40 63 0 50 50 PRZ 30 40 61 4 50 PSH 3-6 PSH 5-10 30 40 59 1 30 40 60 1 50 50 ZBF 5:UNPRINTED 08 08 64 2 10 (3) Snap-lock fitting, for all plugs (4) Snap-lock fitting and strain relief, for all plugs 2-pos. 4-pos. orange orange 1-pos. 2-pos. om (5) Shielding, for mounting on PZ/... and PRZ, for shielded conductors with 2-pos. 3-6 mm ∅ 5-10 mm ∅ co s. in ec white Imax.: 24 A 24 A 24 A 24 A 24 A 24 A nt black black orange (6) Zack strip, flat, for labeling the outer marker grooves FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5 ne (2) Strain relief, 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos. po (1) Plug-in bridge, for cross bridging in the bridge shaft m Plug, double, bridgeable, 5.2 mm wide, left element on l Technical data in accordance with IEC / DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / – Surge voltage category / insulation material group –/– Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulation material Inflammability class acc. to UL 94 Approval data (UL and CSA/CUL) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG Phoenix Contact page 26 of 27 24 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0 600 / 20 / 26-12 600 / 20 / 26-12 ST-COMBI Accessories Snap-lock fitting and strain relief for all plugs 50 50 30 40 56 2 30 40 57 5 50 50 30 40 55 9 30 40 63 0 50 50 30 40 61 4 50 PSH 3-6 PSH 5-10 30 40 59 1 30 40 60 1 50 50 PC 30 40 58 8 50 2-pos. 4-pos. PZ/2 PZ/4 black black 2-pos. 4-pos. PDZ/2 PDZ/4 orange orange 1-pos. 2-pos. PR PR/2 orange 2-pos. PRZ Shielding, for mounting on PZ/... and PRZ, for shielded conductors with 3-6 mm-∅ 5-10 mm-∅ po Coding star, with 4 coding branches, can be inserted in all base terminal blocks m 30 40 62 7 30 40 64 3 black black s. Snap-lock fitting, for all plugs Pcs. Pkt. nt Strain relief, for SPDB ... plugs and receptacle SC... Order No. ne Strain relief, for SP ... and SPB ... plugs Type co Technical data om Recommendation for the use of optional accessories Number of positions Strain relief 5 - 10 1 x P…/2 1 x PR 1 x PR/2 or 2 x PR 1 x P…/4 or 2 x P…/2 2 x PR/2 or 4 x PR 2 x P…/4 or 4 x P…/2 3 x PR/2 or 6 x PR TNR 5125812/15.03.2003-02  Phoenix Contact on l 11 - 15 – in ec 1 2-4 Snap-lock fitting Phoenix Contact page 27 of 27