3042007

https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Multi-level terminal block, nom. voltage: 250 V, nominal current: 10 A, connection method: Spring-cage/plug-in connection, number of connections: 6, cross section:0.08 mm² - 4 mm², AWG: 28 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Why buy this product  Can be labeled at each terminal point  Design width of just 5.2 mm  Four feed-through levels Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK GTIN GTIN 4017918952785 Weight per Piece (excluding packing) 25.070 g Custom tariff number 85369010 Country of origin China Technical data General Number of levels 4 Number of connections 6 Nominal cross section 2.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 03/09/2018   Page 1 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Technical data General Rated surge voltage 4 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels) Connection in acc. with standard IEC 61984 Nominal current IN 10 A Maximum load current 10 A (with a 2.5 mm² conductor cross section) Nominal voltage UN 250 V Open side panel Yes Insertion/withdrawal cycles mechanical 100 Result of surge voltage test Test passed Surge voltage test setpoint 4.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Short circuit stability result Test passed Conductor cross section short circuit testing 1 mm² Short-time current 0.12 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec.; UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 03/09/2018   Page 2 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 5.2 mm Length 120.5 mm Height NS 35/7,5 59 mm Height NS 35/15 66.5 mm Connection data Connection method Spring-cage/plug-in connection Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.08 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, max. Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Standards and Regulations Connection in acc. with standard CSA IEC 61984 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 03/09/2018   Page 3 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Diagram Maximum load current [A] Circuit diagram 12 10 8 6 ! = 2-pos. = 5-pos. = 10-pos. ! = 15-pos. 4 2 0 0 20 40 60 80 100 120 Ambient temperature [°C] Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / BV / EAC / cULus Recognized 03/09/2018   Page 4 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Approvals Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B mm²/AWG/kcmil 28-12 Nominal current IN 10 A Nominal voltage UN 300 V UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B D mm²/AWG/kcmil 28-12 28-12 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V cUL Recognized   13631   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B D mm²/AWG/kcmil 28-12 28-12 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V  FILE E 60425  FILE E 60425 EAC      7500651.22.01.00246 BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  13403/B0 BV 03/09/2018   Page 5 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Approvals EAC  cULus Recognized      RU CDE.A*30.B.01742   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Cable housing Cable housing - PH CP-H 2,5/2 - 3012332 Cable housing, width: 10.4 mm, number of positions: 2, color: gray     Cable housing - PH CP-H 2,5/3 - 3012333 Cable housing, width: 15.6 mm, number of positions: 3, color: gray     Cable housing - PH CP-H 2,5/4 - 3012334 Cable housing, width: 20.8 mm, number of positions: 4, color: gray     03/09/2018   Page 6 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Cable housing - PH CP-H 2,5/5 - 3012335 Cable housing, width: 26 mm, number of positions: 5, color: gray     Cable tie Cable tie - WT-HF 2,5X98 BK - 3240733 Cable binders for quick and secure bundling, standard version     Component plug terminal block Component connector - P-CO 2-5 R47K - 3032447 Component connector, with 47 kOhm resistor for open circuit monitoring, pitch: 5.2 mm, length: 8.9 mm, width: 4.1 mm, height: 34.8 mm, number of positions: 2, color: black     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     03/09/2018   Page 7 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     03/09/2018   Page 8 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     03/09/2018   Page 9 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     03/09/2018   Page 10 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Documentation Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     03/09/2018   Page 11 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-ST 2,5-4L/2P - 3041927 End cover, length: 120.5 mm, width: 2.2 mm, height: 57 mm, color: gray     Filler plug Filler plugs - CEC 2,5 - 3062757 Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT) with a width of 5.2 mm     Flange 03/09/2018   Page 12 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Flange - PT 2,5-4L/2P-FS - 3012312 Flange, length: 125 mm, width: 5.2 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     03/09/2018   Page 13 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Insulating sleeve - ISH 2,5/0,2 - 3002843 Insulating sleeve, color: white     Insulating sleeve - ISH 2,5/0,5 - 3002856 Insulating sleeve, color: gray     03/09/2018   Page 14 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Insulating sleeve - ISH 2,5/1,0 - 3002869 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 24.6 mm, number of positions: 5, color: red     03/09/2018   Page 15 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-5 - 3038930 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: red     Plug-in bridge - FBSR 2-5 - 3033702 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-5 - 3001591 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red     03/09/2018   Page 16 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Plug-in bridge - FBSR 4-5 - 3001592 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-5 - 3001593 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-5 - 3033710 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red     Plug-in bridge - FBS 2-5 BU - 3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-5 BU - 3036880 Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue     03/09/2018   Page 17 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Plug-in bridge - FBS 4-5 BU - 3036893 Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-5 BU - 3036903 Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-5 BU - 3036916 Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-5 BU - 3036929 Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 50-5 BU - 3032114 Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue     Labeled terminal marker 03/09/2018   Page 18 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017 Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020     Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415 Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     03/09/2018   Page 19 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     03/09/2018   Page 20 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm     Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm     Partition plate Spacer plate - DP PS-5 - 3036725 Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red     03/09/2018   Page 21 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Plug Connector housing - CP 4/6 - 3061049 Connector housing, length: 36.9 mm, width: 20.7 mm, height: 52.7 mm, number of positions: 6, color: gray     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     03/09/2018   Page 22 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Screwdriver - ST-BW - 1207608 Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm     Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm     03/09/2018   Page 23 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Test plugs - PS-5 - 3030983 Test plugs, color: red     Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, color: red     03/09/2018   Page 24 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     03/09/2018   Page 25 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Necessary add-on products 03/09/2018   Page 26 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Connector housing - CP 2,5-4L - 3041956 Connector housing, nom. voltage: 250 V, nominal current: 10 A, connection method: Plug connection, number of connections: 4, number of positions: 4, cross section:0.5 mm² - 2.5 mm², AWG: 20 - 14, width: 5.2 mm, height: 13 mm, color: gray, mounting type: Plug-in mounting     Connector housing - CP 2,5-4L-Z - 3041943 Connector housing, nom. voltage: 250 V, nominal current: 10 A, connection method: Plug connection, number of connections: 4, number of positions: 4, cross section:0.5 mm² - 2.5 mm², AWG: 20 - 14, width: 5.2 mm, height: 13 mm, color: gray, mounting type: Plug-in mounting     Female insert - STG-MTN 0,5-1,0 - 3190438 Module socket contact, inserted in the PCC or HCC plug housing after crimping the conductor, for 0.5 mm² ... 1.0 mm² conductors     Female insert - STG-MTN 1,5-2,5 - 3190506 Module socket contact, inserted in the PCC or HCC plug housing after crimping the conductor, for 1.5 mm² ... 2.5 mm² conductors     Crimping pliers - CRIMPFOX MT 2,5 - 1204038 Crimping pliers, for crimping conductors to the module female contacts STG-MTN, crimp range: 0.5-2.5 mm², AWG: 20-14     03/09/2018   Page 27 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Cover profile - AP-CP-H METER - 3012315 Cover profile, length: 1 m     End cover - D-CP-H 2,5-4L - 3012320 End cover, length: 31.6 mm, width: 7.5 mm, height: 34.5 mm, color: gray     Flange cover - DFS-CP-H 2,5-4L - 3012317 Self-locking flange cover as a cover profile carrier, for CP-H 2,5-4L, can be adapted on both sides of the plug     Flange cover - DFS-CP 2,5-4L - 3012321 Flange cover, length: 31.6 mm, width: 5.2 mm, height: 26 mm, color: gray     Spacer plate - DP-CP-H 2,5-4L - 3012319 Spacer plate     03/09/2018   Page 28 / 29 https://www.phoenixcontact.com/us/products/3042007 Multi-level terminal block - ST 2,5-4L/2P - 3042007 Accessories Connector housing - CP-H 2,5-4L - 3012313 Connector housing, length: 31.6 mm, width: 5.2 mm, height: 31.7 mm, number of positions: 4, color: gray     Connector housing - CP-H 2,5-4L-Z - 3012314 Connector housing, length: 31.6 mm, width: 5.2 mm, height: 31.7 mm, number of positions: 1, color: gray     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 03/09/2018   Page 29 / 29