3044102

https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw connection, number of connections: 2, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 46.9 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Your advantages  The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section  As well as saving space, the compact design enables user-friendly wiring in a small amount of space  Optimum screwdriver guidance through closed screw shafts  Tested for railway applications  The cable entry funnel enables the use of conductors with ferrules and plastic collars within the nominal cross section Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918960391 Weight per Piece (excluding packing) 9.600 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 4 mm² 11/05/2019   Page 1 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Technical data General Color gray Insulating material PA Flammability rating according to UL 94 V0 Area of application Railway industry Machine building Plant engineering Process industry Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W Designation Level 1 above 1 below 1 Maximum load current 41 A (with 6 mm² conductor cross section) Nominal current IN 32 A (with 4 mm² conductor cross section) Nominal voltage UN 1000 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg 6 mm² / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N 11/05/2019   Page 2 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Technical data General Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 11/05/2019   Page 3 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Technical data General NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm End cover width 2.2 mm Length 47.7 mm Height 46.9 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw connection Screw thread M3 Stripping length 9 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection in acc. with standard IEC 60947-7-1 Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 11/05/2019   Page 4 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Technical data Connection data 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Connection in acc. with standard IEC/EN 60079-7 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Internal cylindrical gage A4 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 11/05/2019   Page 5 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals DNV GL / CSA / PRS / LR / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / RS / cULus Recognized 11/05/2019   Page 6 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Approvals Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAE00001S9 CSA    http://www.csagroup.org/services-industries/product-listing/  13631   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10 PRS    http://www.prs.pl/  TE/2156/880590/17 LR    http://www.lr.org/en  05/20042 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V  FILE E 60425 11/05/2019   Page 7 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Approvals   B C Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10 IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 800 V mm²/AWG/kcmil 0.2-4 VDE Gutachten mit Fertigungsüberwachung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 800 V Nominal current IN 32 A mm²/AWG/kcmil 0.2-4  DE1-60117  40013658     RU CDE.A*30.B.01742 RS    http://www.rs-head.spb.ru/en/index.php  17.00013.272 cULus Recognized       EAC  Accessories Accessories DIN rail 11/05/2019   Page 8 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     11/05/2019   Page 9 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     11/05/2019   Page 10 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     11/05/2019   Page 11 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     11/05/2019   Page 12 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-UT 2,5/10 - 3047028 End cover, length: 47 mm, width: 2.2 mm, height: 39.8 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     11/05/2019   Page 13 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper 11/05/2019   Page 14 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red     Plug-in bridge - FBS 6-6 - 1008238 Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red     11/05/2019   Page 15 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-6 - 3032224 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red     Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red     11/05/2019   Page 16 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-6 BU - 3036945 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue     11/05/2019   Page 17 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Plug-in bridge - FBS 4-6 BU - 3036958 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-6 BU - 3036961 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-6 BU - 3032198 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-6 BU - 3032208 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 50-6 BU - 3032211 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue     Labeled terminal marker 11/05/2019   Page 18 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     11/05/2019   Page 19 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate Partition plate - ATP-UT - 3047167 Partition plate, length: 53.4 mm, width: 2.2 mm, height: 45.7 mm, color: gray     11/05/2019   Page 20 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Screwdriver - SF-SL 0,6X3,5-100 S-VDE - 1212587 Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Short-circuit connector 11/05/2019   Page 21 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Short-circuit connector - FBSRH 2-6 - 3033812 Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red     Terminal marking Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     11/05/2019   Page 22 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Test plugs - PS-6 - 3030996 Test plugs, color: red     Test plugs - PS-6/2,3MM RD - 3038736 Test plugs, color: red     Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     11/05/2019   Page 23 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     11/05/2019   Page 24 / 25 https://www.phoenixcontact.com/us/products/3044102 Feed-through terminal block - UT 4 - 3044102 Accessories Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Warning label printed Warning label - WS UT 4 - 3047332 Warning sign for UT terminal blocks     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/05/2019   Page 25 / 25