3044160

https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, connection method: Screw connection, number of connections: 2, cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, width: 10.2 mm, height: 46.9 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Your advantages  The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section  As well as saving space, the compact design enables user-friendly wiring in a small amount of space  Optimum screwdriver guidance through closed screw shafts  Tested for railway applications  The cable entry funnel enables the use of conductors with ferrules and plastic collars within the nominal cross section Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918960445 Weight per Piece (excluding packing) 17.830 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 10 mm² 08/14/2019   Page 1 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Technical data General Color gray Insulating material PA Flammability rating according to UL 94 V0 Area of application Railway industry Machine building Plant engineering Process industry Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.82 W Designation Level 1 above 1 below 1 Maximum load current 76 A (with 16 mm² conductor cross section) Nominal current IN 57 A Nominal voltage UN 1000 V Open side panel Yes Shock protection test specification IEC 60529:2001-02 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.5 mm² / 0.3 kg 10 mm² / 2 kg 16 mm² / 2.9 kg Tensile test result Test passed Conductor cross section tensile test 0.5 mm² Tractive force setpoint 20 N Conductor cross section tensile test 10 mm² Tractive force setpoint 90 N 08/14/2019   Page 2 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Technical data General Conductor cross section tensile test 16 mm² Tractive force setpoint 100 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 10 mm² Short-time current 1.2 kA Conductor cross section short circuit testing 16 mm² Short-time current 1.92 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Dimensions Width 10.2 mm End cover width 2.2 mm 08/14/2019   Page 3 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Technical data Dimensions Length 47.7 mm Height 46.9 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw connection Screw thread M4 Stripping length 10 mm Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Connection in acc. with standard IEC 60947-7-1 Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 16 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 6 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 16 mm² Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 6 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 10 mm² 2 conductors with same cross section, solid min. 0.5 mm² 2 conductors with same cross section, solid max. 4 mm² 2 conductors with same cross section, stranded min. 0.5 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 6 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 2.5 mm² Connection in acc. with standard IEC/EN 60079-7 08/14/2019   Page 4 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Technical data Connection data Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 16 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 6 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 10 mm² Internal cylindrical gage A6 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 08/14/2019   Page 5 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Classifications UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals DNV GL / CSA / PRS / LR / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / RS / cULus Recognized Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / cULus Recognized Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAE00001S9 CSA    http://www.csagroup.org/services-industries/product-listing/  13631   B C Nominal voltage UN 600 V 600 V Nominal current IN 65 A 65 A mm²/AWG/kcmil 20-6 20-6 PRS    http://www.prs.pl/  TE/2156/880590/17 08/14/2019   Page 6 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Approvals LR    http://www.lr.org/en  05/20042 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425   B C Nominal voltage UN 600 V 600 V Nominal current IN 65 A 65 A mm²/AWG/kcmil 20-6 20-6 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 65 A 65 A mm²/AWG/kcmil 20-6 20-6 IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 1000 V mm²/AWG/kcmil 0.5-10 VDE Gutachten mit Fertigungsüberwachung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 1000 V Nominal current IN 57 A mm²/AWG/kcmil 0.5-10 EAC      FILE E 60425  DE1-60928  40013658  RU CDE.A*30.B.01742 08/14/2019   Page 7 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Approvals RS    http://www.rs-head.spb.ru/en/index.php  17.00013.272 cULus Recognized       Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     08/14/2019   Page 8 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     08/14/2019   Page 9 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     08/14/2019   Page 10 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     08/14/2019   Page 11 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - E/AL-NS 35 - 1201662 End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum     End cover End cover - D-UT 2,5/10 - 3047028 End cover, length: 47 mm, width: 2.2 mm, height: 39.8 mm, color: gray     Jumper Plug-in bridge - FBS 2-10 - 3005947 Plug-in bridge, pitch: 10.2 mm, number of positions: 2, color: red     08/14/2019   Page 12 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories Plug-in bridge - FBS 5-10 - 3005948 Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: red     Plug-in bridge - FBS 5-10 BU - 1040620 Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: blue     Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 991 ... 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 991 ... 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     08/14/2019   Page 13 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Marker for terminal blocks - ZB10,LGS:U-N - 1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm     Marker for terminal blocks - TMT 10 R CUS - 0824500 Marker for terminal blocks, can be ordered: by line, white, labeled according to customer specifications, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 6.35 x 10.15 mm     Marker pen 08/14/2019   Page 14 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate Partition plate - ATP-UT - 3047167 Partition plate, length: 50 mm, width: 2.2 mm, height: 48 mm, color: gray     Pick-off terminal block Pick-off terminal block - AGK 4-UT 10 - 3047112 Pick-off terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 8.1 mm, height: 24.7 mm, color: gray, mounting type: on base element     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     08/14/2019   Page 15 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Reducing bridge Reducing bridge - RB UT 10-(2,5/4) - 3047060 Reducing bridge, pitch: 10.2 mm, length: 29.3 mm, width: 15.1 mm, number of positions: 2, color: red     Reducing bridge - RB UT 10-ST(2,5/4) - 3047086 Reducing bridge, pitch: 10.2 mm, length: 33.4 mm, width: 15.1 mm, number of positions: 2, color: red     Reducing bridge - RB UT 35-10 - 3032168 Reducing bridge, pitch: 13.2 mm, number of positions: 2, color: red     Screwdriver tools Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     08/14/2019   Page 16 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories Terminal marking Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm     Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm     Marker for terminal blocks - TMT 10 R - 0816210 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 6.35 x 10.15 mm     Warning label printed 08/14/2019   Page 17 / 18 https://www.phoenixcontact.com/us/products/3044160 Feed-through terminal block - UT 10 - 3044160 Accessories Warning label - WS UT 10 - 3047361 Warning sign for UT terminal blocks     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/14/2019   Page 18 / 18