https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw connection,
number of connections: 2, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 46.9 mm, color:
violet, mounting type: NS 35/7,5, NS 35/15
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918977252
Weight per Piece (excluding packing)
9.420 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
4 mm²
Color
violet
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
11/14/2019 Page 1 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Technical data
General
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W
Designation
Level 1 above 1 below 1
Maximum load current
41 A (with 6 mm² conductor cross section)
Nominal current IN
32 A (with 4 mm² conductor cross section)
Nominal voltage UN
1000 V
Open side panel
Yes
Dimensions
Width
6.2 mm
End cover width
2.2 mm
Length
47.7 mm
Height
46.9 mm
Height NS 35/7,5
47.5 mm
Height NS 35/15
55 mm
Connection data
Connection method
Screw connection
Screw thread
M3
Stripping length
9 mm
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Connection in acc. with standard
IEC 60947-7-1
Note
Note: Product releases, connection cross sections and notes on
connecting aluminum cables can be found in the download area.
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
11/14/2019 Page 2 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Technical data
Connection data
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.14 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
Connection in acc. with standard
IEC/EN 60079-7
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Internal cylindrical gage
A4
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
11/14/2019 Page 3 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Classifications
eCl@ss
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
DNV GL / CSA / PRS / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / RS / cULus
Recognized
Ex Approvals
IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAE00001S9
11/14/2019 Page 4 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Approvals
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
mm²/AWG/kcmil
26-10
26-10
13631
PRS
http://www.prs.pl/
TE/2156/880590/17
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
mm²/AWG/kcmil
26-10
26-10
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
mm²/AWG/kcmil
26-10
26-10
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
800 V
mm²/AWG/kcmil
0.2-4
FILE E 60425
DE1-60117
11/14/2019 Page 5 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Approvals
VDE Gutachten mit
Fertigungsüberwachung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal voltage UN
800 V
Nominal current IN
32 A
mm²/AWG/kcmil
0.2-4
40013658
RU CDE.A*30.B.01742
RS
http://www.rs-head.spb.ru/en/index.php
17.00013.272
cULus Recognized
EAC
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
11/14/2019 Page 6 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
11/14/2019 Page 7 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
11/14/2019 Page 8 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
11/14/2019 Page 9 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
11/14/2019 Page 10 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
End cover
End cover - D-UT 2,5/10 - 3047028
End cover, length: 47 mm, width: 2.2 mm, height: 39.8 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
11/14/2019 Page 11 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red
11/14/2019 Page 12 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red
Plug-in bridge - FBS 6-6 - 1008238
Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red
11/14/2019 Page 13 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Plug-in bridge - FBS 50-6 - 3032224
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-6 - 3001594
Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-6 - 3001595
Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-6 - 3001596
Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red
11/14/2019 Page 14 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-6 BU - 3036945
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-6 BU - 3036958
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-6 BU - 3036961
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue
11/14/2019 Page 15 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Plug-in bridge - FBS 10-6 BU - 3032198
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-6 BU - 3032208
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 50-6 BU - 3032211
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue
Labeled terminal marker
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
11/14/2019 Page 16 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 80
11/14/2019 Page 17 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 60
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Partition plate - ATP-UT - 3047167
Partition plate, length: 53.4 mm, width: 2.2 mm, height: 45.7 mm, color: gray
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Short-circuit connector
11/14/2019 Page 18 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Short-circuit connector - FBSRH 2-6 - 3033812
Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red
Terminal marking
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm, Number of individual labels: 60
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
11/14/2019 Page 19 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Test plugs - PS-6 - 3030996
Test plugs, color: red
Test plugs - PS-6/2,3MM RD - 3038736
Test plugs, color: red
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
11/14/2019 Page 20 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
11/14/2019 Page 21 / 22
https://www.phoenixcontact.com/us/products/3044607
Feed-through terminal block - UT 4 VT - 3044607
Accessories
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/14/2019 Page 22 / 22
