3044674

https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Disconnect terminal block, With test socket screws for insertion of test plugs, nom. voltage: 400 V, nominal current: 16 A, connection method: Screw connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, length: 80.1 mm, width: 5.2 mm, color: gray, mounting: NS 35/7,5, NS 35/15 Your advantages  For a clear overview, each terminal point supports large-surface labeling  Standardized disconnect zone for the use of component plugs Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356894128 Weight per Piece (excluding packing) 23.200 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 2 Number of connections 4 Nominal cross section 2.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV 08/01/2019   Page 1 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Technical data General Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 16 A Maximum load current 16 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) Nominal voltage UN 400 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 2.5 mm² / 0.7 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 2.5 mm² Tractive force setpoint 50 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 6,4 mV Result of temperature-rise test Test passed Short circuit stability result Test passed 08/01/2019   Page 2 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Technical data General Conductor cross section short circuit testing 1.5 mm² Short-time current 0.18 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 5.2 mm Length 80.1 mm 08/01/2019   Page 3 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Technical data Dimensions Height NS 35/7,5 58.1 mm Height NS 35/15 65.6 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 08/01/2019   Page 4 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Technical data Standards and Regulations Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 eCl@ss 9.0 27141126 ETIM ETIM 5.0 EC000902 ETIM 6.0 EC000902 ETIM 7.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals 08/01/2019   Page 5 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B C Nominal voltage UN 300 V 300 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-12 26-12 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 300 V 300 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-12 26-12 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 300 V 300 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-12 26-12 EAC  cULus Recognized   13631  FILE E 60425  FILE E 60425     RU CDE.A*30.B.01742      Accessories Accessories Bridge 08/01/2019   Page 6 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Feed-through connector - P-FIX - 3038956 Feed-through connector, length: 10.5 mm, width: 4 mm, color: gray     Component plug terminal block Component connector - P-CO XL-UT - 3036799 Component connector, for installing components that can be individually selected up to a diameter of 10 mm and power dissipation of up to 1 W, nominal current: 10 A, length: 41.2 mm, width: 12.3 mm, height: 37.5 mm, number of positions: 1, color: gray     Component connector - P-CO - 3036796 Component connector, for installing components that can be individually selected, nominal current: 6 A, pitch: 5.2 mm, length: 24.2 mm, width: 5.1 mm, height: 33.3 mm, number of positions: 1, color: gray     Component connector - P-CO 1N4007/R-L - 3032457 Component connector, with diode1N4007, length: 24.2 mm, width: 5.2 mm, height: 33.3 mm, number of positions: 1, color: gray     Component connector - P-CO 1N4007/L-R - 3032460 Component connector, with diode1N4007, length: 24.2 mm, width: 5.2 mm, height: 33.3 mm, number of positions: 1, color: gray     08/01/2019   Page 7 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     08/01/2019   Page 8 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     08/01/2019   Page 9 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     08/01/2019   Page 10 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     08/01/2019   Page 11 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-UTT 2,5/4 - 3044676 End cover, length: 80.1 mm, width: 2.2 mm, height: 57.4 mm, color: gray     Fuse Fuse plug - P-FU 5X20-5 - 3209235 Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, nom. voltage: 400 V, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black     Fuse plug - P-FU 5X20 LED 24-5 - 3209248 Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black     08/01/2019   Page 12 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Fuse plug - P-FU 5X20 LED 60-5 - 3209251 Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black     Fuse plug - P-FU 5X20 LED 250-5 - 3209264 Fuse plug, fuse type: Glass / ceramics / ..., connection method: Plug connection, nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     08/01/2019   Page 13 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Knife Isolating plugs - P-DI - 3036783 Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: orange     08/01/2019   Page 14 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Isolating plugs - P-DI GY - 3047390 Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: gray     Isolating plugs - P-DI GN - 1071062 Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: green     Isolating plugs - P-DI - 3036783 Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: orange     Isolating plugs - P-DI GY - 3047390 Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: gray     Labeled terminal marker Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     08/01/2019   Page 15 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017 Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020 Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415 Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm     08/01/2019   Page 16 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate Spacer plate - DP-UTT 2,5/4 - 3044677 Spacer plate, length: 80.1 mm, width: 2.6 mm, height: 33.1 mm, color: gray     Spacer plate - DP PS-5 - 3036725 Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red     Screwdriver tools 08/01/2019   Page 17 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Screwdriver - SZG 0,6X3,5 VDE - 1205121 Screwdriver, slot-headed, graded, for test socket screws, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm     08/01/2019   Page 18 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Test plugs - PS-5 - 3030983 Test plugs, color: red     Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, color: red     Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     08/01/2019   Page 19 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     08/01/2019   Page 20 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Additional products Isolating plugs - P-DI - 3036783 Isolating plugs, length: 10.8 mm, width: 3.5 mm, height: 23.1 mm, color: orange     Feed-through connector - P-FIX - 3038956 Feed-through connector, length: 10.5 mm, width: 4 mm, color: gray     08/01/2019   Page 21 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Component connector - P-CO - 3036796 Component connector, for installing components that can be individually selected, nominal current: 6 A, pitch: 5.2 mm, length: 24.2 mm, width: 5.1 mm, height: 33.3 mm, number of positions: 1, color: gray     Component connector - P-CO 1N4007/R-L - 3032457 Component connector, with diode1N4007, length: 24.2 mm, width: 5.2 mm, height: 33.3 mm, number of positions: 1, color: gray     Component connector - P-CO 1N4007/L-R - 3032460 Component connector, with diode1N4007, length: 24.2 mm, width: 5.2 mm, height: 33.3 mm, number of positions: 1, color: gray     Fuse plug - P-FU 5X20 LED 24 - 3036819 Fuse plug, fuse type: Glass / ceramics / ..., nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black     Fuse plug - P-FU 5X20 LED 60 - 3036822 Fuse plug, fuse type: Glass / ceramics / ..., nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black     08/01/2019   Page 22 / 23 https://www.phoenixcontact.com/us/products/3044674 Disconnect terminal block - UTT 2,5-2TG-P/P - 3044674 Accessories Fuse plug - P-FU 5X20 LA 250 - 3036835 Fuse plug, fuse type: Glass / ceramics / ..., nominal current: 6.3 A, width: 6.2 mm, fuse type: G / 5 x 20, mounting type: Plug-in mounting, color: black     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/01/2019   Page 23 / 23