3045127

https://www.phoenixcontact.com/us/products/3045127 Feed-through terminal block - UT 4 RD - 3045127 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Width: 6.2 mm, Color: red, Mounting type: NS 35/7,5, NS 35/15 The illustration shows the color version Product Features  The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section  As well as saving space, the compact design enables user-friendly wiring in a small amount of space  Optimum screwdriver guidance through closed screw shafts  The multi-conductor connection offers maximum flexibility and wiring density  The cable entry funnel enables the use of conductors with ferrules and plastic collars within the nominal cross section     Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 9.42 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Nominal cross section 4 mm² Color red Insulating material PA Flammability rating according to UL 94 V0 01/03/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/3045127 Feed-through terminal block - UT 4 RD - 3045127 Technical data General Rated surge voltage 8 kV Pollution degree 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 41 A (with 6 mm² conductor cross section) Nominal current IN 32 A (with 4 mm² conductor cross section) Nominal voltage UN 1000 V Open side panel ja Dimensions Width 6.2 mm End cover width 2.2 mm Length 47.7 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 01/03/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/3045127 Feed-through terminal block - UT 4 RD - 3045127 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Connection in acc. with standard IEC/EN 60079‑7 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 01/03/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/3045127 Feed-through terminal block - UT 4 RD - 3045127 Classifications ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / DNV / IECEE CB Scheme / GL / EAC / EAC / RS / cULus Recognized Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized Approvals submitted Approval details CSA    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V 01/03/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/3045127 Feed-through terminal block - UT 4 RD - 3045127 Approvals UL Recognized    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V VDE Gutachten mit Fertigungsüberwachung      mm²/AWG/kcmil 0.2-4 Nominal voltage UN 800 V cUL Recognized    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V DNV  IECEE CB Scheme      mm²/AWG/kcmil 0.2-4 Nominal voltage UN 800 V GL  EAC  EAC  01/03/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/3045127 Feed-through terminal block - UT 4 RD - 3045127 Approvals RS  cULus Recognized  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 01/03/2016   Page 6 / 6