3045211

https://www.phoenixcontact.com/us/products/3045211 Feed-through terminal block - UT 6 GN - 3045211 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, Connection method: Screw connection, Cross section: 0.2 mm² - 10 mm², AWG: 24 - 8, Width: 8.2 mm, Color: green, Mounting type: NS 35/7,5, NS 35/15 The illustration shows the color version Product Features ■ ■ ■ ■ ■ ■ The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section As well as saving space, the compact design enables user-friendly wiring in a small amount of space Optimum screwdriver guidance through closed screw shafts The multi-conductor connection offers maximum flexibility and wiring density Tested for railway applications The cable entry funnel enables the use of conductors with ferrules and plastic collars within the nominal cross section Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 14.88 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Nominal cross section 6 mm² Color green 03/07/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/3045211 Feed-through terminal block - UT 6 GN - 3045211 Technical data General Insulating material PA Flammability rating according to UL 94 V0 Area of application Railway industry Mechanical engineering Plant engineering Process industry Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 57 A (with 10 mm² conductor cross section) Nominal current IN 41 A Nominal voltage UN 1000 V Open side panel Yes Dimensions Width 8.2 mm End cover width 2.2 mm Length 47.7 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 10 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 10 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 8 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² 03/07/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/3045211 Feed-through terminal block - UT 6 GN - 3045211 Technical data Connection data Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 2.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Connection in acc. with standard IEC/EN 60079‑7 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 10 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 6 mm² Stripping length 10 mm Internal cylindrical gage A5 Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 03/07/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/3045211 Feed-through terminal block - UT 6 GN - 3045211 Classifications eCl@ss eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / IECEE CB Scheme / GL / DNV / EAC / RS / cULus Recognized Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized Approvals submitted Approval details CSA    B C mm²/AWG/kcmil 24-8 24-8 03/07/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/3045211 Feed-through terminal block - UT 6 GN - 3045211 Approvals   B C Nominal current IN 50 A 50 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 24-8 24-8 Nominal current IN 50 A 50 A Nominal voltage UN 600 V 600 V UL Recognized  VDE Gutachten mit Fertigungsüberwachung      mm²/AWG/kcmil 0.2-6 Nominal voltage UN 800 V cUL Recognized    B C mm²/AWG/kcmil 24-8 24-8 Nominal current IN 50 A 50 A Nominal voltage UN 600 V 600 V IECEE CB Scheme      mm²/AWG/kcmil 0.2-6 Nominal voltage UN 800 V GL  DNV  EAC  03/07/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/3045211 Feed-through terminal block - UT 6 GN - 3045211 Approvals RS  cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/07/2016   Page 6 / 6