3045583

https://www.phoenixcontact.com/us/products/3045583 Feed-through terminal block - UT 4/ 1P - 3045583 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, Connection method: Screw/plug-in connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features ■ ■ ■ Compatible with standard UT terminal blocks Terminal blocks that can be connected on both sides available Uniform, touch-proof plug-in zone Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 9.288 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I 04/29/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/3045583 Feed-through terminal block - UT 4/ 1P - 3045583 Technical data General Maximum load current 32 A (with 6 mm² conductor cross section) Nominal current IN 32 A Nominal voltage UN 800 V Open side panel Yes Insertion/withdrawal cycles mechanical 100 Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.3 kg 4 mm² / 0.9 kg 2 6 mm / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0,8 g Test duration per axis 5h 04/29/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/3045583 Feed-through terminal block - UT 4/ 1P - 3045583 Technical data General Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 120 °C Dimensions Width 6.2 mm End cover width 2.2 mm Length 47.6 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw/plug-in connection Connection in acc. with standard IEC 61984 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 04/29/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/3045583 Feed-through terminal block - UT 4/ 1P - 3045583 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 61984 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 04/29/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/3045583 Feed-through terminal block - UT 4/ 1P - 3045583 Classifications UNSPSC UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / EAC / KEMA-KEUR / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V cUL Recognized  04/29/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/3045583 Feed-through terminal block - UT 4/ 1P - 3045583 Approvals CSA    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V EAC  KEMA-KEUR      Nominal current IN 32 A Nominal voltage UN 800 V IECEE CB Scheme      Nominal current IN 32 A Nominal voltage UN 800 V EAC  cULus Recognized  Drawings 04/29/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/3045583 Feed-through terminal block - UT 4/ 1P - 3045583 Diagram Current carrying capacity [A] Circuit diagram 35 1 30 3 25 2 4 20 15 10 1 = 2-pos. 2 = 5-pos. 3 = 10-pos. 4 = 15-pos. 5 0 0 20 40 60 80 100 120 Ambient temperature [°C] The figure shows the derating curve of the UT 4/1P... terminal block in connection with the UPVB 4 plug Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/29/2016   Page 7 / 7