3046145

https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Knife disconnect terminal block, with actuation latch, nom. voltage: 500 V, nominal current: 20 A, connection method: Screw connection, cross section: 0.2 mm² - 10 mm², AWG: 24 - 8, length: 57.8 mm, width: 8.2 mm, color: gray, mounting: NS 35/7,5, NS 35/15, nom. voltage: 500 V Why buy this product  Double bridge shaft enables individual potential distribution and supply  Compact design and high current carrying capacity of 20 A Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK GTIN GTIN 4055626007984 Weight per Piece (excluding packing) 18.400 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 6 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 04/02/2018   Page 1 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Technical data General Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.31 W Maximum load current 20 A (with 10 mm² conductor cross section) Nominal current IN 20 A Nominal voltage UN 500 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 2 6 mm / 1.4 kg 10 mm² / 2 kg Tensile test result Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Conductor cross section tensile test 10 mm² Tractive force setpoint 90 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 6,4 mV Result of temperature-rise test Test passed 04/02/2018   Page 2 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Technical data General Short circuit stability result Test passed Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 8.2 mm Length 57.8 mm Height NS 35/7,5 49.1 mm Height NS 35/15 56.6 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 10 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 10 mm² Min. AWG conductor cross section, flexible 24 04/02/2018   Page 3 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Technical data Connection data Max. AWG conductor cross section, flexible 8 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 2.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Stripping length 10 mm Internal cylindrical gage A5 Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 04/02/2018   Page 4 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Circuit diagram Classifications eCl@ss eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 8.0 27141126 eCl@ss 9.0 27141126 ETIM ETIM 5.0 EC000902 ETIM 6.0 EC000902 UNSPSC UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B C mm²/AWG/kcmil 24-8 24-8 Nominal current IN 16 A 16 A Nominal voltage UN 600 V 600 V  13631 04/02/2018   Page 5 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 24-8 24-8 Nominal current IN 16 A 16 A Nominal voltage UN 600 V 600 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 24-8 24-8 Nominal current IN 16 A 16 A Nominal voltage UN 600 V 600 V cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425  FILE E 60425   Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/02/2018   Page 6 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     04/02/2018   Page 7 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     04/02/2018   Page 8 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     04/02/2018   Page 9 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     04/02/2018   Page 10 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     04/02/2018   Page 11 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-8 - 3030297 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-8 - 3030307 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     04/02/2018   Page 12 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Plug-in bridge - FBS 5-8 - 3030310 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBS 6-8 - 3032470 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: red     Plug-in bridge - FBSR 2-8 - 3033808 Plug-in bridge, pitch: 8.2 mm, width: 14.8 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-8 - 3001597 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-8 - 3000585 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     04/02/2018   Page 13 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Plug-in bridge - FBSR 5-8 - 3033809 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-8 - 3001599 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red     Plug-in bridge - FBS 2-8 CT - 3033830 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange     Plug-in bridge - FBS 3-8 CT - 3033831 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange     Plug-in bridge - FBS 4-8 CT - 3033832 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange     04/02/2018   Page 14 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Plug-in bridge - FBS 10-8 CT - 3033833 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-8 BU - 3032570 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-8 BU - 3032583 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-8 BU - 3032596 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue     04/02/2018   Page 15 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Plug-in bridge - FBS 6-8 BU - 3032677 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue     Plug-in bridge - FBS 10-8 BU - 3032606 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue     Labeled terminal marker Zack marker strip - ZB 8 CUS - 0825011 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Marker for terminal blocks - UC-TM 8 CUS - 0824597 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 8 CUS - 0829616 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     04/02/2018   Page 16 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate Partition plate - ATP-UT-TWIN - 3047183 Partition plate, length: 62.1 mm, width: 2.2 mm, height: 52.5 mm, color: gray     04/02/2018   Page 17 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Reducing bridge Reducing bridge - RB UT 6-(2,5/4) - 3047251 Reducing bridge, pitch: 9.5 mm, length: 24.6 mm, width: 14.5 mm, number of positions: 2, color: red     Reducing bridge - RB UT 6-ST(2,5/4) - 3047264 Reducing bridge, pitch: 9.5 mm, length: 33.4 mm, width: 14.5 mm, number of positions: 2, color: red     Screwdriver tools Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     Short-circuit connector Short-circuit connector - FBSRH 2-8 - 3033802 Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     04/02/2018   Page 18 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Short-circuit connector - FBSRH 3-8 - 3033803 Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Short-circuit connector - FBSRH 4-8 - 3033804 Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Switching jumper Switching jumper - SB-MER 2-8 - 3000587 Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 16.4 mm, number of positions: 2, color: gray/orange     Switching jumper - SB-MER 3-8 - 3000588 Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 24.6 mm, number of positions: 3, color: gray/orange     Switching jumper - SB-MER 4-8 - 3000589 Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 32.8 mm, number of positions: 4, color: gray/orange     04/02/2018   Page 19 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Terminal marking Zack marker strip - ZB 8:UNBEDRUCKT - 1052002 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm     Marker for terminal blocks - UC-TM 8 - 0818072 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 8 - 0828740 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Test socket 04/02/2018   Page 20 / 21 https://www.phoenixcontact.com/us/products/3046145 Knife disconnect terminal block - UT 6-MTL - 3046145 Accessories Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/02/2018   Page 21 / 21