3046237

https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Component terminal block, for installing components that can be individually selected, nom. voltage: 800 V, nominal current: 0.5 A, connection method: Screw connection, number of connections: 2, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Your advantages  The consistent labeling and bridging of terminal blocks is an advantage Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356624640 Weight per Piece (excluding packing) 11.200 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 09/09/2019   Page 1 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Technical data General Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 0.5 A Maximum load current 0.5 A Nominal voltage UN 800 V Open side panel Yes Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm Length 57.8 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² 09/09/2019   Page 2 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Technical data Connection data Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/09/2019   Page 3 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141127 eCl@ss 8.0 27141127 eCl@ss 9.0 27141127 ETIM ETIM 4.0 EC000902 ETIM 5.0 EC000903 ETIM 6.0 EC000903 ETIM 7.0 EC000903 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals EAC Ex Approvals 09/09/2019   Page 4 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Approvals Approval details EAC      RU CDE.A*30.B.01742 Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     09/09/2019   Page 5 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     09/09/2019   Page 6 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     09/09/2019   Page 7 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block 09/09/2019   Page 8 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-UT 2,5/4-TWIN - 3047141 End cover, length: 56.8 mm, width: 2.2 mm, height: 39.8 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     09/09/2019   Page 9 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     09/09/2019   Page 10 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red     09/09/2019   Page 11 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Plug-in bridge - FBS 6-6 - 1008238 Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red     Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-6 - 3032224 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red     Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red     09/09/2019   Page 12 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     09/09/2019   Page 13 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Plug-in bridge - FBS 3-6 BU - 3036945 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-6 BU - 3036958 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-6 BU - 3036961 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-6 BU - 3032198 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue     Plug-in bridge - FBS 20-6 BU - 3032208 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue     09/09/2019   Page 14 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Plug-in bridge - FBS 50-6 BU - 3032211 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue     Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     09/09/2019   Page 15 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     09/09/2019   Page 16 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Reducing bridge Reducing bridge - RB UT 10-(2,5/4) - 3047060 Reducing bridge, pitch: 10.2 mm, length: 29.3 mm, width: 15.1 mm, number of positions: 2, color: red     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Short-circuit connector Short-circuit connector - FBSRH 2-6 - 3033812 Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red     Terminal marking 09/09/2019   Page 17 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Test plugs - PS-6 - 3030996 Test plugs, color: red     09/09/2019   Page 18 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Test plugs - PS-6/2,3MM RD - 3038736 Test plugs, color: red     Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     09/09/2019   Page 19 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     09/09/2019   Page 20 / 21 https://www.phoenixcontact.com/us/products/3046237 Component terminal block - UT 4-MTD-BE - 3046237 Accessories Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/09/2019   Page 21 / 21