https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Feed-through terminal block, Connection method: Screw connection, Cross section: 0.5 mm² - 16 mm²,
AWG: 20 - 6, Width: 10.2 mm, Color: orange, Mounting type: NS 35/7,5, NS 35/15
The illustration shows the color
version
Product Features
The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section
As well as saving space, the compact design enables user-friendly wiring in a small amount of space
The multi-conductor connection offers maximum flexibility and wiring density
Optimum screwdriver guidance through closed screw shafts
The cable entry funnel enables the use of conductors with ferrules and plastic collars within the nominal cross section
Key commercial data
Packing unit
11
Weight per Piece (excluding packing)
17.86 GRM
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
1
Number of connections
2
Color
orange
Insulating material
PA
Inflammability class according to UL 94
V0
Maximum load current
76 A (with 16 mm² conductor cross section)
Rated surge voltage
8 kV
31.10.2013 Page 1 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Technical data
General
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
76 A
Nominal voltage UN
1000 V
Open side panel
ja
Dimensions
Width
10.2 mm
Length
47.7 mm
Height NS 35/7,5
47.5 mm
Height NS 35/15
55 mm
Connection data
Note
Note: Product releases, connection cross sections and notes on
connecting aluminum cables can be found in the download area.
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
16 mm²
Conductor cross section AWG/kcmil min.
20
Conductor cross section AWG/kcmil max
6
Conductor cross section stranded min.
0.5 mm²
Conductor cross section stranded max.
16 mm²
Min. AWG conductor cross section, stranded
20
Max. AWG conductor cross section, stranded
6
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
10 mm²
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, solid max.
6 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
2 conductors with same cross section, stranded max.
6 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
6 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm²
31.10.2013 Page 2 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Technical data
Connection data
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
2.5 mm²
Connection method
Screw connection
Stripping length
10 mm
Internal cylindrical gage
A6
Screw thread
M4
Tightening torque, min
1.5 Nm
Tightening torque max
1.8 Nm
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
31.10.2013 Page 3 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Approvals
Approvals
CSA / UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / DNV / IECEE CB Scheme / GL / cULus Recognized
Ex Approvals
IECEx / ATEX
Approvals submitted
Approval details
CSA
B
C
mm²/AWG/kcmil
20-6
20-6
Nominal current IN
65 A
65 A
Nominal voltage UN
600 V
600 V
B
C
mm²/AWG/kcmil
20-6
20-6
Nominal current IN
65 A
65 A
Nominal voltage UN
600 V
600 V
UL Recognized
VDE Gutachten mit Fertigungsüberwachung
mm²/AWG/kcmil
0.5-10
Nominal voltage UN
1000 V
31.10.2013 Page 4 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Approvals
cUL Recognized
B
C
mm²/AWG/kcmil
20-6
20-6
Nominal current IN
65 A
65 A
Nominal voltage UN
600 V
600 V
DNV
IECEE CB Scheme
mm²/AWG/kcmil
0.5-10
Nominal voltage UN
1000 V
GL
cULus Recognized
Accessories
Accessories
Bridge
Plug-in bridge - FBS 2-10 - 3005947
Plug-in bridge, Number of positions: 2, Color: red
31.10.2013 Page 5 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
Reducing bridge - RB UT 10-(2,5/4) - 3047060
Reducing bridge, Number of positions: 2, Color: red
Reducing bridge - RB UT 10-ST(2,5/4) - 3047086
Reducing bridge, Number of positions: 2, Color: red
End cover
End cover - D-UT 2,5/10 - 3047028
End cover, Length: 47.7 mm, Width: 2.2 mm, Height: 48.4 mm, Color: gray
End cover - D-UT 2,5/10 OG - 3047219
End cover, Length: 48 mm, Width: 2.2 mm, Height: 48.4 mm, Color: orange
Labeled terminal marker
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
31.10.2013 Page 6 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm
Marker for terminal blocks - TMT 10 R CUS - 0824500
Marker for terminal blocks, Can be ordered: By line, white, Labeled according to customer specifications, Mounting type:
Snap into universal marker groove, Snap into flat marker groove, For terminal block width: 10.2 mm, Lettering field: 6.35
x 10.15 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Mounting rail
31.10.2013 Page 7 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
31.10.2013 Page 8 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
31.10.2013 Page 9 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
DIN rail - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
31.10.2013 Page 10 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
Partition plate - ATP-UT - 3047167
Partition plate, Length: 50 mm, Width: 2.2 mm, Height: 48 mm, Color: gray
31.10.2013 Page 11 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
Pick-off terminal block
Pick-off terminal block - AGK 4-UT 10 - 3047112
Pick-off terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10,
Width: 8.2 mm, Height: 34.7 mm, Color: gray, Mounting type: On base element
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm
31.10.2013 Page 12 / 13
https://www.phoenixcontact.com/us/products/3046281
Feed-through terminal block - UT 10 OG - 3046281
Accessories
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 10.2
mm, Lettering field: 8.9 x 9.6 mm
Marker for terminal blocks - TMT 10 R - 0816210
Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X,
THERMOMARK S1.1, Perforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, For
terminal block width: 10.2 mm, Lettering field: 6.35 x 10.15 mm
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
31.10.2013 Page 13 / 13
