3046595

https://www.phoenixcontact.com/us/products/3046595 Disconnect terminal block - UT 4-TWIN-TG - 3046595 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Disconnect terminal block, Connection type: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Nominal current: 20 A, Nominal voltage: 500 V, Length: 65.4 mm, Width: 6.2 mm, Color: gray, Assembly: NS 35/7,5, NS 35/15 Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 15.67 g Custom tariff number 85369010 Country of origin Poland Technical data General Note The max. load current must not be exceeded by the total current of all connected conductors. Current and voltage are determined by the plug used. Number of levels 1 Number of connections 3 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum load current 20 A (with 6 mm² conductor cross section) Nominal current IN 20 A 04/28/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/3046595 Disconnect terminal block - UT 4-TWIN-TG - 3046595 Technical data General Nominal voltage UN 500 V Open side panel Yes Dimensions Width 6.2 mm End cover width 2.2 mm Length 65.4 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 04/28/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/3046595 Disconnect terminal block - UT 4-TWIN-TG - 3046595 Technical data Connection data Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141199 eCl@ss 4.1 27141199 eCl@ss 5.0 27141145 eCl@ss 5.1 27141145 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141126 eCl@ss 9.0 27141126 ETIM ETIM 2.0 EC000886 ETIM 3.0 EC000886 ETIM 4.0 EC000897 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211827 UNSPSC 7.0901 39121424 UNSPSC 11 39121424 UNSPSC 12.01 39121424 UNSPSC 13.2 39121424 Approvals Approvals 04/28/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/3046595 Disconnect terminal block - UT 4-TWIN-TG - 3046595 Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / EAC / VDE Zeichengenehmigung / IECEE CB Scheme / cULus Recognized Ex Approvals Approvals submitted Approval details CSA    B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 16 A 16 A 10 A Nominal voltage UN 300 V 150 V 300 V   B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 20 A 20 A 10 A Nominal voltage UN 300 V 150 V 300 V   B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 20 A 20 A 10 A Nominal voltage UN 300 V 150 V 300 V UL Recognized  cUL Recognized  EAC  EAC  04/28/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/3046595 Disconnect terminal block - UT 4-TWIN-TG - 3046595 Approvals VDE Zeichengenehmigung      mm²/AWG/kcmil 0.2-4.0 Nominal current IN 20 A Nominal voltage UN 500 V IECEE CB Scheme      mm²/AWG/kcmil 0.2-4.0 Nominal voltage UN 500 V cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/28/2016   Page 5 / 5