https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Multi-level terminal block, Cross section: 0.2 mm² - 10 mm², AWG: 24 - 8, Connection type: Screw connection,
Width: 8.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
Why buy this product
The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section
For a clear overview, each terminal point supports large-surface labeling
Optimum screwdriver guidance through closed screw shafts
A very high wiring density is achieved with the compact three-level terminal blocks
The cable entry funnel enables the use of conductors with ferrules and plastic collars within the nominal cross section
Key Commercial Data
Packing unit
1 STK
Weight per Piece (excluding packing)
57.200 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
Environmental Product Compliance
China RoHS
Hazardous substances above threshold values;
Environmentally Friendly Use Period = 50;
For details go to tab “Downloads”, Category “Manufacturer's declaration”
General
Number of levels
3
Number of connections
6
Nominal cross section
6 mm²
Color
gray
09/08/2016 Page 1 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Technical data
General
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
36 A
Maximum load current
50 A (with 10 mm² conductor cross section)
Nominal voltage UN
1000 V
Open side panel
Yes
Number of positions
1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Checking the mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
2
6 mm / 1.4 kg
10 mm² / 2 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
5N
09/08/2016 Page 2 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Technical data
General
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
8.2 mm
Length
110 mm
Height NS 35/7,5
98.8 mm
Height NS 35/15
106.3 mm
Connection data
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
09/08/2016 Page 3 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Technical data
Connection data
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
4 mm²
sleeve, max.
Stripping length
10 mm
Internal cylindrical gage
A5
Screw thread
M4
Tightening torque, min
1.5 Nm
Tightening torque max
1.8 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Drawings
Circuit diagram
09/08/2016 Page 4 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000902
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
Approval details
09/08/2016 Page 5 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Approvals
CSA
http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631
B
C
mm²/AWG/kcmil
24-8
24-8
Nominal current IN
40 A
40 A
Nominal voltage UN
600 V
600 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
24-8
24-8
Nominal current IN
40 A
40 A
Nominal voltage UN
600 V
600 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
mm²/AWG/kcmil
24-8
24-8
Nominal current IN
40 A
40 A
Nominal voltage UN
600 V
600 V
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
09/08/2016 Page 6 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
09/08/2016 Page 7 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
09/08/2016 Page 8 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
09/08/2016 Page 9 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
09/08/2016 Page 10 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-UT 6-3L - 3046707
End cover, Length: 110 mm, Width: 2.2 mm, Height: 91.1 mm, Color: gray
Jumper
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, Pitch: 8.2 mm, Length: 29.6 mm, Width: 14.7 mm, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 4, Color: red
09/08/2016 Page 11 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 5, Color: red
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field:
10.5 x 8.15 mm
09/08/2016 Page 12 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11 20, etc. up to 91 - 100, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5
x 8.15 mm
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N,
PE, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Spacer plate - DP PS-8 - 3036741
Spacer plate, Length: 22.4 mm, Width: 8.2 mm, Height: 29 mm, Number of positions: 1, Color: red
Planning and marking software
09/08/2016 Page 13 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
09/08/2016 Page 14 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Test plug terminal block
Test plugs - PS-8 - 3031005
Test plugs, Color: red
Test plugs - PS-8/2,3MM RD - 3048564
Test plugs, Color: red
Test socket
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
09/08/2016 Page 15 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Test adapter - PAI-4-FIX BU - 3032729
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX OG - 3034455
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX YE - 3032745
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX RD - 3032732
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX GN - 3032758
4 mm test adapter, for terminal blocks with 8.2 mm pitch
09/08/2016 Page 16 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Test adapter - PAI-4-FIX BK - 3032774
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX GY - 3032790
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX VT - 3032761
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX BN - 3032787
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAI-4-FIX WH - 3032797
4 mm test adapter, for terminal blocks with 8.2 mm pitch
09/08/2016 Page 17 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Test adapter - PAIS-4-FIX GY - 3032791
Test adapter, Color: gray
Test adapter - PAIS-4-FIX BK - 3032792
Test adapter, Color: black
Test adapter - PAIS-4-FIX RD - 3032793
Test adapter, Color: red
Test adapter - PAIS-4-FIX BU - 3032798
Test adapter, Color: blue
Test adapter - PAIS-4-FIX YE - 3032799
Test adapter, Color: yellow
09/08/2016 Page 18 / 19
https://www.phoenixcontact.com/us/products/3046703
Multi-level terminal block - UT 6-3L - 3046703
Accessories
Test adapter - PAIS-4-FIX GN - 3032801
Test adapter, Color: green
Test adapter - PAIS-4-FIX VT - 3032802
Test adapter, Color: violet
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/08/2016 Page 19 / 19
