https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Double-level terminal block with screw connection, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2
mm, color: red
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356118798
Weight per Piece (excluding packing)
20.520 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
2
Number of connections
4
Nominal cross section
4 mm²
Color
red
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
04/02/2018 Page 1 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Technical data
General
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
30 A
Maximum load current
36 A (with 6 mm² conductor cross section)
Nominal voltage UN
800 V
Open side panel
Yes
Shock protection test specification
IEC 60529:2001-02
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Checking the mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
4 mm² / 0.9 kg
2
6 mm / 1.4 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.14 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
120 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
5N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
04/02/2018 Page 2 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Technical data
General
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
2 2
Dimensions
Width
6.2 mm
Length
69.9 mm
Height NS 35/7,5
65 mm
Height NS 35/15
72.5 mm
Connection data
Connection method
Screw connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
04/02/2018 Page 3 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Technical data
Connection data
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.14 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
Stripping length
9 mm
Internal cylindrical gage
A4
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141118
04/02/2018 Page 4 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Classifications
eCl@ss
eCl@ss 6.0
27141141
eCl@ss 7.0
27141141
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000901
ETIM 3.0
EC000901
ETIM 4.0
EC000901
ETIM 5.0
EC000901
ETIM 6.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / EAC / DNV GL / PRS / cULus Recognized
Ex Approvals
IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
D
mm²/AWG/kcmil
26-10
26-10
26-10
Nominal current IN
30 A
30 A
5A
13631
04/02/2018 Page 5 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Approvals
B
C
D
Nominal voltage UN
300 V
300 V
600 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
26-10
26-10
26-10
Nominal current IN
30 A
30 A
5A
Nominal voltage UN
300 V
300 V
600 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
D
mm²/AWG/kcmil
26-10
26-10
26-10
Nominal current IN
30 A
30 A
5A
Nominal voltage UN
300 V
300 V
600 V
EAC
DNV GL
FILE E 60425
FILE E 60425
EAC-Zulassung
http://exchange.dnv.com/tari/
TAE00001S9
PRS
http://www.prs.pl/
TE/2156/880590/17
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
DIN rail
04/02/2018 Page 6 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
04/02/2018 Page 7 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
04/02/2018 Page 8 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
04/02/2018 Page 9 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001,
material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
04/02/2018 Page 10 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-UTTB 2,5/4 - 3047293
End cover, length: 69.9 mm, width: 2.2 mm, height: 57.5 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
04/02/2018 Page 11 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
04/02/2018 Page 12 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red
Plug-in bridge - FBS 6-6 - 1008238
Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red
04/02/2018 Page 13 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red
Plug-in bridge - FBS 50-6 - 3032224
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-6 - 3001594
Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red
04/02/2018 Page 14 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Plug-in bridge - FBSR 4-6 - 3001595
Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red
Plug-in bridge - FBSR 5-6 - 3001596
Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-6 BU - 3036945
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue
04/02/2018 Page 15 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Plug-in bridge - FBS 4-6 BU - 3036958
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-6 BU - 3036961
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-6 BU - 3032198
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-6 BU - 3032208
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 50-6 BU - 3032211
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue
Labeled terminal marker
04/02/2018 Page 16 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 - 10, 11 - 20, etc. up to 491 - 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm
04/02/2018 Page 17 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Spacer plate - DP-UTTB 2,5/4 - 3047303
Spacer plate, length: 69.9 mm, width: 2.6 mm, height: 33 mm, color: gray
04/02/2018 Page 18 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Partition plate - ATP-UTTB 2,5/4 - 3047316
Partition plate, length: 74.3 mm, width: 2.2 mm, height: 70 mm, color: gray
Screwdriver tools
Screwdriver - SF-SL 0,6X3,5-100 S-VDE - 1212587
Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use
as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Short-circuit connector
Short-circuit connector - FBSRH 2-6 - 3033812
Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red
Terminal marking
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
04/02/2018 Page 19 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for
terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Test plug terminal block
Test plugs - PS-6/2,3MM RD - 3038736
Test plugs, color: red
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver
Test plugs - PS-6 - 3030996
Test plugs, color: red
04/02/2018 Page 20 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Test plugs - PS-6/2,3MM RD - 3038736
Test plugs, color: red
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
04/02/2018 Page 21 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
04/02/2018 Page 22 / 23
https://www.phoenixcontact.com/us/products/3046786
Feed-through terminal block - UTTB 4 RD - 3046786
Accessories
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Vertical bridge
Potential bridge - FBS-PV UT - 3047358
Vertical potential bridge, to connect the upper and lower level
Warning label printed
Warning label - WS UT 4 - 3047332
Warning sign for UT terminal blocks
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/02/2018 Page 23 / 23
