3046809

https://www.phoenixcontact.com/us/products/3046809 Component terminal block - UTTB 4-DIO/O-U - 3046809 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Component terminal block, with integrated diode, Cross section:  0.14 mm² - 6 mm², AWG: 26 - 10, Connection type: Screw connection, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 The figure shows a version of the article Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 20.4 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 2 Number of connections 4 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 30 A Maximum load current 36 A (with 6 mm² conductor cross section) 03/07/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/3046809 Component terminal block - UTTB 4-DIO/O-U - 3046809 Technical data General Nominal voltage UN 800 V Open side panel Yes Dimensions Width 6.2 mm Length 69.9 mm Height NS 35/7,5 65 mm Height NS 35/15 72.5 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations 03/07/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/3046809 Component terminal block - UTTB 4-DIO/O-U - 3046809 Technical data Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141127 eCl@ss 4.1 27141127 eCl@ss 5.0 27141127 eCl@ss 5.1 27141127 eCl@ss 6.0 27141127 eCl@ss 7.0 27141127 eCl@ss 8.0 27141127 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000903 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / EAC Ex Approvals 03/07/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/3046809 Component terminal block - UTTB 4-DIO/O-U - 3046809 Approvals Approvals submitted Approval details CSA    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 1A 1A Nominal voltage UN 300 V 300 V EAC  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/07/2016   Page 4 / 4