3047112

https://www.phoenixcontact.com/us/products/3047112 Pick-off terminal block - AGK 4-UT 10 - 3047112 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pick-off terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Width: 8.1 mm, Height: 24.7 mm, Color: gray, Mounting type: On base element Product Features ■ ■ ■ The fully insulated, optional use pick-off terminal block enables voltage pick-off Large-surface marking Pick-off terminal block, for snapping into the lateral guide Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 5.4 g Custom tariff number 85369010 Country of origin Poland Technical data General Color gray Insulating material PA Nominal cross section 4 mm² Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Overvoltage category III Insulating material group I Connection in acc. with standard IEC/EN 60079‑7 Nominal current IN 32 A 03/14/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/3047112 Pick-off terminal block - AGK 4-UT 10 - 3047112 Technical data General Maximum load current 76 A (the maximum load current must not be exceeded by the total current of all connected conductors) Nominal voltage UN 1000 V Open side panel No Dimensions Length 36.3 mm Height NS 35/7,5 50.3 mm Height NS 35/15 57.8 mm Width 8.1 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CUL IEC/EN 60079‑7 03/14/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/3047112 Pick-off terminal block - AGK 4-UT 10 - 3047112 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141131 eCl@ss 4.1 27141131 eCl@ss 5.0 27141131 eCl@ss 5.1 27141120 eCl@ss 6.0 27141151 eCl@ss 7.0 27141151 eCl@ss 8.0 27141151 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC002021 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex 03/14/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/3047112 Pick-off terminal block - AGK 4-UT 10 - 3047112 Approvals Approvals submitted Approval details UL Recognized    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V cUL Recognized  EAC  EAC  cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 4 / 4