3047125

https://www.phoenixcontact.com/us/products/3047125 Pick-off terminal block - AGK 4-UT 16 - 3047125 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pick-off terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 8.1 mm, height: 24.7 mm, color: gray, mounting type: on base element Your advantages  The fully insulated, optional use pick-off terminal block enables voltage pick-off  Large-surface marking  Pick-off terminal block, for snapping into the lateral guide Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356055895 Weight per Piece (excluding packing) 6.010 g Custom tariff number 85369010 Country of origin Poland Technical data General Color gray Insulating material PA Nominal cross section 4 mm² Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Overvoltage category III Insulating material group I 06/28/2020   Page 1 / 7 https://www.phoenixcontact.com/us/products/3047125 Pick-off terminal block - AGK 4-UT 16 - 3047125 Technical data General Maximum power dissipation for nominal condition 1.02 W Ambient temperature (operation) -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) Additional text For a short time, not exceeding 24 h, -60 to +70 °C Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Connection in acc. with standard IEC/EN 60079-7 Nominal current IN 32 A (with 4 mm² conductor cross section) Maximum load current 41 A (with 6 mm² conductor cross section) Nominal voltage UN 1000 V Open side panel No Shock protection test specification IEC 60529:2001-02 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg 6 mm² / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N 06/28/2020   Page 2 / 7 https://www.phoenixcontact.com/us/products/3047125 Pick-off terminal block - AGK 4-UT 16 - 3047125 Technical data General Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Length 39.4 mm Height NS 35/7,5 55.7 mm Height NS 35/15 63.2 mm Width 8.1 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² 06/28/2020   Page 3 / 7 https://www.phoenixcontact.com/us/products/3047125 Pick-off terminal block - AGK 4-UT 16 - 3047125 Technical data Connection data Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm² Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm² Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CUL IEC/EN 60079-7 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141151 eCl@ss 4.0 27141100 06/28/2020   Page 4 / 7 https://www.phoenixcontact.com/us/products/3047125 Pick-off terminal block - AGK 4-UT 16 - 3047125 Classifications eCl@ss eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141151 eCl@ss 8.0 27141151 eCl@ss 9.0 27141151 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC002021 ETIM 6.0 EC002021 ETIM 7.0 EC002021 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121402 UNSPSC 18.0 39121402 UNSPSC 19.0 39121402 UNSPSC 20.0 39121402 UNSPSC 21.0 39121402 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / cULus Recognized 06/28/2020   Page 5 / 7 https://www.phoenixcontact.com/us/products/3047125 Pick-off terminal block - AGK 4-UT 16 - 3047125 Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10  FILE E 60425  FILE E 60425 EAC      EAC-Zulassung cULus Recognized       Accessories Accessories Screwdriver tools Screwdriver - SZS 0,6X3,5 VDE - 1212602 Screwdriver, slot-headed, VDE insulated, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     06/28/2020   Page 6 / 7 https://www.phoenixcontact.com/us/products/3047125 Pick-off terminal block - AGK 4-UT 16 - 3047125 Accessories Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Screwdriver - SF-SL 0,6X3,5-100 - 1212549 Screwdriver, bladed (lasered), size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/28/2020   Page 7 / 7