3047452

https://www.phoenixcontact.com/us/products/3047452 Test disconnect terminal block - UTME 4 - 3047452 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Test disconnect terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features ■ Compact design Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 15.2 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Overvoltage category III Insulating material group I Maximum load current 28 A Nominal current IN 28 A Nominal voltage UN 500 V 05/10/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/3047452 Test disconnect terminal block - UTME 4 - 3047452 Technical data General Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg 2 6 mm / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.5 kA Conductor cross section short circuit testing 4 mm² Short-time current 0.15 kA Conductor cross section short circuit testing 4 mm² Short-time current 1.25 kA Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 05/10/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/3047452 Test disconnect terminal block - UTME 4 - 3047452 Technical data General Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Dimensions Width 6.2 mm End cover width 2.2 mm Length 66 mm Height NS 35/7,5 47.7 mm Height NS 35/15 55.2 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 05/10/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/3047452 Test disconnect terminal block - UTME 4 - 3047452 Technical data Connection data Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141126 eCl@ss 4.1 27141126 eCl@ss 5.0 27141126 eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 eCl@ss 9.0 27141126 05/10/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/3047452 Test disconnect terminal block - UTME 4 - 3047452 Classifications ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized    B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 25 A 25 A 5A Nominal voltage UN 300 V 300 V 600 V 05/10/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/3047452 Test disconnect terminal block - UTME 4 - 3047452 Approvals cUL Recognized    B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 25 A 25 A 5A Nominal voltage UN 300 V 300 V 600 V   B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 25 A 25 A 5A Nominal voltage UN 300 V 300 V 600 V CSA  EAC  EAC  cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/10/2016   Page 6 / 6