3047676

https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, Connection method: Screw connection, Cross section: 1.5 mm² - 50 mm², AWG: 16 - 1/0, Width: 16 mm, Color: black/yellow, Mounting type: NS 35/7,5, NS 35/15 Why buy this product  The flexible options for reducing bridging in the CLIPLINE complete system can be found in "Accessories for the CLIPLINE complete modular terminal block system"  The reducing bridges can be used to connect terminal blocks with different connection technologies, e.g., UT 35 screw terminal block with Push-in technology 2,5 Push-in terminal blocks, to form power blocks Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK Weight per Piece (excluding packing) 59.200 g Custom tariff number 85369010 Country of origin Turkey Technical data Environmental Product Compliance China RoHS No hazardous substances above threshold values General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 35 mm² Color black/yellow Insulating material PA Flammability rating according to UL 94 V0 09/08/2016   Page 1 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Technical data General Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum load current 150 A (with 50 mm² conductor cross section) Nominal current IN 125 A Nominal voltage UN 1000 V Open side panel No Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 16 mm End cover width 2.2 mm Length 60.2 mm Height NS 35/7,5 65.7 mm Height NS 35/15 73.2 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 1.5 mm² Conductor cross section solid max. 50 mm² 09/08/2016   Page 2 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Technical data Connection data Conductor cross section AWG min. 16 Conductor cross section AWG max. 1/0 Conductor cross section flexible min. 1.5 mm² Conductor cross section flexible max. 50 mm² Min. AWG conductor cross section, flexible 16 Max. AWG conductor cross section, flexible 1 Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm² 2 conductors with same cross section, solid min. 1.5 mm² 2 conductors with same cross section, solid max. 16 mm² 2 conductors with same cross section, stranded min. 1.5 mm² 2 conductors with same cross section, stranded max. 10 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 16 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 10 mm² Connection in acc. with standard IEC/EN 60079-7 Conductor cross section solid min. 1.5 mm² Conductor cross section solid max. 50 mm² Conductor cross section AWG min. 16 Conductor cross section AWG max. 1/0 Conductor cross section flexible min. 1.5 mm² Conductor cross section flexible max. 35 mm² Stripping length 18 mm Internal cylindrical gage B9 Screw thread M6 Tightening torque, min 3.2 Nm Tightening torque max 3.7 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 09/08/2016   Page 3 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Drawings Circuit diagram Schematic diagram 90° Connecting aluminum cables. Further notes can be found in the download area Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 09/08/2016   Page 4 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Approvals Approvals CSA / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details CSA   http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631   B C mm²/AWG/kcmil 14-1/0 14-1/0 Nominal current IN 150 A 150 A Nominal voltage UN 600 V 600 V UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   B C mm²/AWG/kcmil 14-1/0 14-1/0 Nominal current IN 150 A 150 A Nominal voltage UN 600 V 600 V cUL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   B C mm²/AWG/kcmil 14-1/0 14-1/0 Nominal current IN 150 A 150 A Nominal voltage UN 600 V 600 V cULus Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Accessories Accessories 09/08/2016   Page 5 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     09/08/2016   Page 6 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     09/08/2016   Page 7 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     09/08/2016   Page 8 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     End block End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     09/08/2016   Page 9 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories End clamp - E/UK - 1201442 End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     Jumper 09/08/2016   Page 10 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories Plug-in bridge - FBS 2-16 - 3005963 Plug-in bridge, Pitch: 16 mm, Length: 43.7 mm, Width: 25.9 mm, Number of positions: 2, Color: red     Labeled terminal marker Zack marker strip - ZB 15 CUS - 0824945 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 15.2 mm, Lettering field: 10.5 x 15.1 mm     Marker for terminal blocks - ZB 15,LGS:L1-N,PE - 0811998 Marker for terminal blocks, Strip, white, labeled, Printed horizontally: L1, L2, L3, N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 15.2 mm, Lettering field: 10.5 x 15.1 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate 09/08/2016   Page 11 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories Partition plate - TPNS-UK - 0706647 Partition plate, Length: 80 mm, Width: 2 mm, Height: 70 mm, Color: gray     Pick-off terminal block Pick-off terminal block - AGK 4-UT 35 - 3047138 Pick-off terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Width: 8.1 mm, Height: 25.7 mm, Color: gray, Mounting type: On base element     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Reducing bridge 09/08/2016   Page 12 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories Reducing bridge - RB UT 35-(2,5/4) - 3047277 Reducing bridge, Pitch: 12.8 mm, Number of positions: 2, Color: red     Reducing bridge - RB UT 35-ST(2,5/4) - 3047280 Reducing bridge, Pitch: 12.8 mm, Number of positions: 2, Color: red     Reducing bridge - RB UT 35-10 - 3032168 Reducing bridge, Pitch: 10 mm, Number of positions: 2, Color: red     Terminal marking Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 15.2 mm, Lettering field: 10.5 x 15.1 mm     Warning label printed Warning label - WS UT 35 - 3047387 Warning sign for UT terminal blocks     09/08/2016   Page 13 / 14 https://www.phoenixcontact.com/us/products/3047676 Feed-through terminal block - UT 35-FE - 3047676 Accessories Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/08/2016   Page 14 / 14