https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Thermoelectric voltage terminal block with bolt connection technology, cross section: 0.1 - 6 mm², AWG: 26 - 10,
width: 16.3 mm, color: gray
The figure shows a version of the
article
Why buy this product
The special clamping nuts can be actuated with a normal screwdriver
Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system
The screws are secured against loosening by captive spring-loaded spacers
Quick and easy connection thanks to hinged cover flaps which hold the clamping nuts captive. When the flaps are open, the connection bolt is freely
accessible and the cable lugs can be hooked in; after closing and engaging the flaps
Large-surface labeling options in the terminal center and above the terminal points
The hinged cover cover the live metal parts including the insulated cable lugs in the clamping area so that they are touch proof
The use of the switching lock effectively prevents unintentional switching
Testing with the standardized test adapters and test plugs of the CLIPLINE complete system
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
250 STK
Custom tariff number
85369010
Country of origin
China
Technical data
Environmental Product Compliance
China RoHS
No hazardous substances above threshold values
General
Note
Note: the BE-RT... path extension is to be used for non-insulated cable
lugs (see accessories).
09/08/2016 Page 1 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Technical data
General
Unit pack: 2 pcs.
Number of levels
1
Number of connections
4
Potentials
2
Nominal cross section
1 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum load current
1A
Nominal current IN
1A
Nominal voltage UN
50 mV
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
5N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
09/08/2016 Page 2 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Technical data
General
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
32.6 mm
End cover width
2.2 mm
Length
66 mm
Height NS 35/7,5
51 mm
Height NS 35/15
58.5 mm
Connection data
Note
Connection bolts
Connection method
Bolt connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
1 mm²
Conductor cross section AWG min.
20
Conductor cross section AWG max.
16
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
1 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
16
Cable lug connection according to standard
DIN 46234
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
1 mm²
Hole diameter, min.
5.3 mm
Cable lug width, max.
10 mm
Bolt diameter
5 mm
Stripping length
10 mm
09/08/2016 Page 3 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Technical data
Connection data
Screw thread
M5
Tightening torque, min
2.5 Nm
Tightening torque max
3 Nm
Standards and Regulations
Flammability rating according to UL 94
V0
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Accessories
Accessories
DIN rail
09/08/2016 Page 4 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
09/08/2016 Page 5 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
09/08/2016 Page 6 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
09/08/2016 Page 7 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
09/08/2016 Page 8 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-RT 3/5 - 3049097
End cover, Length: 65 mm, Width: 2.2 mm, Height: 50.4 mm, Color: gray
09/08/2016 Page 9 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, Color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, Color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, Color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, Color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, Color: green
09/08/2016 Page 10 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, Color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, Color: black
Jumper
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, Pitch: 8.2 mm, Length: 29.6 mm, Width: 14.7 mm, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 4, Color: red
09/08/2016 Page 11 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 5, Color: red
Plug-in bridge - FBS 2-8 CT - 3033830
Plug-in bridge, Pitch: 8.2 mm, Length: 29.6 mm, Width: 14.7 mm, Number of positions: 2, Color: orange
Plug-in bridge - FBS 3-8 CT - 3033831
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 3, Color: orange
Plug-in bridge - FBS 4-8 CT - 3033832
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 4, Color: orange
Plug-in bridge - FBS 10-8 CT - 3033833
Plug-in bridge, Pitch: 8.2 mm, Number of positions: 10, Color: orange
Labeled terminal marker
09/08/2016 Page 12 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Zack marker strip - ZB 12 CUS - 0824942
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 12.2 mm, Lettering field: 10.5 x 12.15 mm
Marker for terminal blocks - ZB 12,LGS:L1-N,PE - 0812146
Marker for terminal blocks, Strip, white, labeled, Printed horizontally: L1, L2, L3, N, PE, Mounting type: Snap into tall
marker groove, for terminal block width: 12.2 mm, Lettering field: 10.5 x 12.15 mm
Marker for terminal blocks - UC-TM 12 CUS - 0824613
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 11.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 12 CUS - 0829630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 10.8 x 9.6 mm
Zack marker strip - ZB 16,3 CUS - 0824946
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Partition plate
09/08/2016 Page 13 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Partition plate - TPNS-UK - 0706647
Partition plate, Length: 80 mm, Width: 2 mm, Height: 70 mm, Color: gray
Spacer plate - DP PS-8 - 3036741
Spacer plate, Length: 22.4 mm, Width: 8.2 mm, Height: 29 mm, Number of positions: 1, Color: red
Protective cap
Path extension - BE-RT 3/5 - 3049819
Path extension, Color: gray
Screwdriver tools
Screwdriver - SZS 1,0X6,5 VDE - 1205079
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
Screwdriver - SF-SL 1,2X6,5-150 - 1212553
Screwdriver, bladed (lasered), size: 1.2 x 6.5 x 150 mm, 2-component grip, with non-slip grip
09/08/2016 Page 14 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Short-circuit connector
Short-circuit connector - FBSRH 2-8 - 3033802
Short-circuit connector, Pitch: 8.2 mm, Number of positions: 2, Color: red
Short-circuit connector - FBSRH 3-8 - 3033803
Short-circuit connector, Pitch: 8.2 mm, Number of positions: 3, Color: red
Short-circuit connector - FBSRH 4-8 - 3033804
Short-circuit connector, Pitch: 8.2 mm, Number of positions: 4, Color: red
Terminal marking
Zack marker strip - ZB 12:UNPRINTED - 0812120
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 12.2 mm, Lettering field: 12 x 10.5 mm
09/08/2016 Page 15 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Marker for terminal blocks - UC-TM 12 - 0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 11.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 12 - 0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 12 mm, Lettering field: 10.8 x 9.6 mm
Zack marker strip - ZB 16,3:UNPRINTED - 0820222
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, Color: silver
Test plugs - PS-8 - 3031005
Test plugs, Color: red
09/08/2016 Page 16 / 17
https://www.phoenixcontact.com/us/products/3048106
Thermoelectric voltage terminal block pair - RT 5-NICR/NI - 3048106
Accessories
Test plugs - PS-8/2,3MM RD - 3048564
Test plugs, Color: red
Test socket
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/08/2016 Page 17 / 17
工商网监
湘ICP备2023018690号
