3048179

https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Knife disconnect terminal block, Connection type: Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Nominal current: 16 A, Nominal voltage: 400 V, Length: 46 mm, Width: 5.2 mm, Color: gray, Assembly: NS 35/7,5, NS 35/15, NS 32 Similar figure Key commercial data Packing unit 11 Minimum order quantity 50 1 Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 16 A (with 4 mm² conductor cross section) Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 16 A Nominal voltage UN 400 V Open side panel ja Dimensions 19.11.2013   Page 1 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Technical data Dimensions Width 5.2 mm Length 46 mm Height NS 35/7,5 51.5 mm Height NS 35/15 59 mm Height NS 32 56 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 2.5 mm² Connection method Screw connection Stripping length 7 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm 19.11.2013   Page 2 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / GOST / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details 19.11.2013   Page 3 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Approvals CSA      mm²/AWG/kcmil 28-12 Nominal current IN 15 A Nominal voltage UN 300 V UL Recognized      mm²/AWG/kcmil 28-12 Nominal current IN 10 A Nominal voltage UN 300 V cUL Recognized      mm²/AWG/kcmil 28-12 Nominal current IN 10 A Nominal voltage UN 300 V GOST  GOST  cULus Recognized  Accessories Accessories 19.11.2013   Page 4 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories Bridge Insertion bridge - EBL 3- 5 - 2303158 Insertion bridge, Number of positions: 3, Color: gray     Insertion bridge - EBL 2- 5 - 2303145 Insertion bridge, Number of positions: 2, Color: gray     Insertion bridge - EBL 10- 5 - 2303132 Insertion bridge, Number of positions: 10, Color: gray     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     19.11.2013   Page 5 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-MTK - 3101029 End cover, Length: 46 mm, Width: 1 mm, Height: 28.7 mm, Color: gray     End cover - D-MTK BU - 3101090 End cover, Length: 46 mm, Width: 1 mm, Color: blue     19.11.2013   Page 6 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories Labeled terminal marker Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm     Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm     Mounting rail DIN rail - NS 32 PERF 2000MM - 1201002 G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m     DIN rail - NS 32 UNPERF 2000MM - 1201015 G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m     19.11.2013   Page 7 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     19.11.2013   Page 8 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     19.11.2013   Page 9 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     19.11.2013   Page 10 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Partition plate Partition plate - ATS-MTK - 3101223 Partition plate, Width: 1 mm, Color: gray     19.11.2013   Page 11 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories Screwdriver tools Screwdriver - SZG 0,6X3,5 VDE - 1205121 Screwdriver, slot-headed, graded, for test socket screws, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker cards - SBS 5:UNBEDRUCKT - 1007219 Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Perforated, Mounting type: Snap into tall marker groove, Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 6 x 5.1 mm     Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm     Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm     19.11.2013   Page 12 / 13 https://www.phoenixcontact.com/us/products/3048179 Knife disconnect terminal block - MTK-P/P AU - 3048179 Accessories Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.11.2013   Page 13 / 13