https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block with bolt connection technology, cross section: 0.1 … 2.5 mm², AWG: 26 … 14,
width 12.3 mm, color: blue
Your advantages
The special clamping nuts can be actuated with a normal screwdriver
The screws are secured against loosening by captive spring-loaded spacers
Quick and easy connection thanks to hinged cover flaps which hold the clamping nuts captive. When the flaps are open, the connection bolt is freely
accessible and the cable lugs can be hooked in; after closing and engaging the flaps
Large-surface labeling options in the terminal center and above the terminal points
Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system
The use of the switching lock effectively prevents unintentional switching
Testing with the standardized test adapters and test plugs of the CLIPLINE complete system
The hinged cover cover the live metal parts including the insulated cable lugs in the clamping area so that they are touch proof
Tested for railway applications
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356140157
Weight per Piece (excluding packing)
26.400 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
08/27/2019 Page 1 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Technical data
General
Note
Note: the BE-RT... path extension is to be used for non-insulated cable
lugs (see accessories).
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
2.5 mm²
Color
blue
Insulating material
PA
Flammability rating according to UL 94
V0
Area of application
Railway industry
Machine building
Plant engineering
Process industry
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W
Designation
Level 1 above 1 below 1
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Nominal current IN
24 A
Nominal voltage UN
1000 V (Rated voltage for open disconnect point 500 V)
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Note regarding shock protection
Electric shock protection only with insulated cable lug and closed wing flap
guaranteed.
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
08/27/2019 Page 2 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Technical data
General
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Short-time current
0.3 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
08/27/2019 Page 3 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Technical data
General
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
12.3 mm
End cover width
2.2 mm
Length
66 mm
Height NS 35/7,5
51 mm
Height NS 35/15
58.5 mm
Connection data
Note
Connection bolts
Connection
1 level
Connection method
Bolt connection
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.1 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Cable lug connection according to standard
DIN 46234
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
2.5 mm²
Hole diameter, min.
3.2 mm
Cable lug width, max.
6 mm
Bolt diameter
3 mm
Cable lug connection according to standard
DIN 46237
Min. cross section for cable lug connection
1 mm²
Max. cross section for cable lug connection
2.5 mm²
Hole diameter, min.
3.2 mm
Cable lug width, max.
6 mm
Bolt diameter
3 mm
Standards and Regulations
Connection in acc. with standard
CUL
08/27/2019 Page 4 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Technical data
Standards and Regulations
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Classifications
eCl@ss
eCl@ss 4.1
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
08/27/2019 Page 5 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Approvals
Approvals
ABS / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / cULus Recognized
Ex Approvals
IECEx / ATEX / EAC Ex
Approval details
ABS
UL Recognized
http://www.eagle.org/eagleExternalPortalWEB/
15-GD1354709-PDA
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
30 A
30 A
FILE E 60425
IECEE CB Scheme
http://www.iecee.org/
DE1-50525
VDE Zeichengenehmigung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
40022553
Nominal voltage UN
1000 V
Nominal current IN
24 A
mm²/AWG/kcmil
0.14-2.5
08/27/2019 Page 6 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Approvals
EAC
EAC-Zulassung
EAC
RU CDE.A*30.B.01742
cULus Recognized
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
08/27/2019 Page 7 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
08/27/2019 Page 8 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
08/27/2019 Page 9 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
08/27/2019 Page 10 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
08/27/2019 Page 11 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-RT 3/5 - 3049097
End cover, length: 65 mm, width: 2.2 mm, height: 50.4 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
08/27/2019 Page 12 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
08/27/2019 Page 13 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red
Plug-in bridge - FBS 6-6 - 1008238
Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red
08/27/2019 Page 14 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red
Plug-in bridge - FBS 50-6 - 3032224
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-6 - 3001594
Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-6 - 3001595
Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red
08/27/2019 Page 15 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Plug-in bridge - FBSR 5-6 - 3001596
Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-6 BU - 3036945
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-6 BU - 3036958
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue
08/27/2019 Page 16 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Plug-in bridge - FBS 5-6 BU - 3036961
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-6 BU - 3032198
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-6 BU - 3032208
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 50-6 BU - 3032211
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm
08/27/2019 Page 17 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 8.2
mm, lettering field size: 10.5 x 8.15 mm
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm,
lettering field size: 10.5 x 8.15 mm
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x
8.15 mm
08/27/2019 Page 18 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Zack marker strip - ZB 12 CUS - 0824942
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm
Zack marker strip - ZB 12,LGS:L1-N,PE - 0812146
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm
Marker for terminal blocks - UC-TM 12 CUS - 0824613
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 12 CUS - 0829630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm
Partition plate
Partition plate - TPNS-UK - 0706647
Partition plate, length: 80 mm, width: 2 mm, height: 70 mm, color: gray
08/27/2019 Page 19 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Protective cap
Path extension - BE-RT 3/5 - 3049819
Path extension, color: gray
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Short-circuit connector
Short-circuit connector - FBSRH 2-6 - 3033812
Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red
Switching jumper
Switching jumper - SB-ME 2-6 - 3035755
Switching jumper, pitch: 6.2 mm, length: 21.2 mm, width: 12.3 mm, number of positions: 2, color: gray/orange
Terminal marking
08/27/2019 Page 20 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size:
7.6 x 10.5 mm
Zack marker strip - ZB 12:UNPRINTED - 0812120
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm
Marker for terminal blocks - UC-TM 12 - 0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 12 mm, lettering field size: 11.45 x 10.5 mm
08/27/2019 Page 21 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Marker for terminal blocks - UCT-TM 12 - 0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size:
10.8 x 9.6 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs - PS-6 - 3030996
Test plugs, color: red
Test plugs - PS-6/2,3MM RD - 3038736
Test plugs, color: red
Test socket
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
08/27/2019 Page 22 / 23
https://www.phoenixcontact.com/us/products/3049110
Bolt connection terminal block - RT 3 BU - 3049110
Accessories
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/27/2019 Page 23 / 23
