3049233

https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Disconnect terminal block with bolt connection method, cross section: 0.1 - 6 mm², AWG: 26 - 10, width: 16.3 mm, color: gray Why buy this product  Four bridge shafts per terminal block  Terminal point always freely accessible  Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system  The screws are secured against loosening by captive spring-loaded spacers  Large-surface labeling options in the terminal center and above the terminal points  The use of the switching lock effectively prevents unintentional switching Key Commercial Data Packing unit 1 STK Minimum order quantity 25 STK GTIN GTIN 4046356140010 Weight per Piece (excluding packing) 40.610 g Custom tariff number 85369010 Country of origin China Technical data General Note Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories). Number of levels 1 04/02/2018   Page 1 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Technical data General Number of connections 2 Potentials 1 Nominal cross section 6 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.31 W Maximum load current 41 A (with 6 mm² conductor cross section) Nominal current IN 41 A Nominal voltage UN 1000 V (Rated voltage for open disconnect point 500 V) Open side panel Yes Shock protection test specification IEC 60529:2001-02 Back of the hand protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 6,4 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted 04/02/2018   Page 2 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Technical data General Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 16.3 mm End cover width 2.2 mm Length 91.4 mm Height NS 35/7,5 49.9 mm Height NS 35/15 57.4 mm Connection data Note Connection bolts 04/02/2018   Page 3 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Technical data Connection data Connection method Bolt connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section flexible min. 0.1 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Cable lug connection according to standard DIN 46234 Min. cross section for cable lug connection 0.5 mm² Max. cross section for cable lug connection 6 mm² Hole diameter, min. 5.3 mm Cable lug width, max. 10 mm Bolt diameter 5 mm Cable lug connection according to standard DIN 46237 Min. cross section for cable lug connection 1 mm² Max. cross section for cable lug connection 6 mm² Hole diameter, min. 5.3 mm Cable lug width, max. 10 mm Bolt diameter 5 mm Screw thread M5 Tightening torque, min 2.5 Nm Tightening torque max 3 Nm Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Standards and Regulations Connection in acc. with standard CUL IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” 04/02/2018   Page 4 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Drawings Circuit diagram Connection diagram 1 2 1 2 1 2 1 2 k l k l k l k l a b c d Simple current transformer test circuit a = normal operation b = measured value testing c = transformer testing d = relay testing Connection diagram Connection diagram 1 2 3 4 5 6 1 2 3 4 5 6 k l k l k l k k k l l l L1 L1 L2 L2 L3 L3 Three-phase transducer test set Three-phase linked transducer test set Classifications eCl@ss eCl@ss 4.0 27141126 04/02/2018   Page 5 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Classifications eCl@ss eCl@ss 4.1 27141126 eCl@ss 5.0 27141126 eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / ABS / cULus Recognized Ex Approvals Approval details 04/02/2018   Page 6 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V ABS  cULus Recognized    FILE E 60425  FILE E 60425  http://www.eagle.org/eagleExternalPortalWEB/  10-HG580261-PDA  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/02/2018   Page 7 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     04/02/2018   Page 8 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     04/02/2018   Page 9 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     04/02/2018   Page 10 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     04/02/2018   Page 11 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-RT 5-T - 3049291 End cover, length: 90.4 mm, width: 2.2 mm, height: 42.2 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     04/02/2018   Page 12 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper 04/02/2018   Page 13 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-8 - 3030297 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-8 - 3030307 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Plug-in bridge - FBS 5-8 - 3030310 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBS 10-8 - 3030323 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red     04/02/2018   Page 14 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Plug-in bridge - FBSR 2-8 - 3033808 Plug-in bridge, pitch: 8.2 mm, width: 14.8 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-8 - 3001597 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-8 - 3000585 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-8 - 3033809 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-8 - 3001599 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red     04/02/2018   Page 15 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Plug-in bridge - FBS 2-8 CT - 3033830 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange     Plug-in bridge - FBS 3-8 CT - 3033831 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange     Plug-in bridge - FBS 4-8 CT - 3033832 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange     Plug-in bridge - FBS 10-8 CT - 3033833 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     04/02/2018   Page 16 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Plug-in bridge - FBS 3-8 BU - 3032570 Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-8 BU - 3032583 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-8 BU - 3032596 Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 6-8 BU - 3032677 Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue     Plug-in bridge - FBS 10-8 BU - 3032606 Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue     Labeled terminal marker 04/02/2018   Page 17 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Zack marker strip - ZB 16 CUS - 0827463 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 10.5 x 16 mm     Zack marker strip - ZB 16,LGS:L1-N,PE - 0827462 Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm     Marker for terminal blocks - UC-TM 16 CUS - 0824621 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 16 CUS - 0829637 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 14.8 x 9.6 mm     Zack marker strip - ZB 16,3 CUS - 0824946 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm     Partition plate 04/02/2018   Page 18 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Partition plate - TPNS-UK - 0706647 Partition plate, length: 80 mm, width: 2 mm, height: 70 mm, color: gray     Separating plate - TS-UT 6-T/SP - 3072821 Separating plate, length: 105.2 mm, width: 1 mm, height: 67.5 mm, color: gray     Spacer plate - DP PS-8 - 3036741 Spacer plate, length: 22.4 mm, width: 8.2 mm, height: 29 mm, number of positions: 1, color: red     Protective cap Path extension - BE-RT 3/5 - 3049819 Path extension, color: gray     Short-circuit connector Short-circuit connector - FBSRH 2-8 - 3033802 Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     04/02/2018   Page 19 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Short-circuit connector - FBSRH 3-8 - 3033803 Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red     Short-circuit connector - FBSRH 4-8 - 3033804 Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red     Socket spanner Tool - SHN 8 - 1209868 Socket wrench, wrench size 8 mm     Switching jumper Switching jumper - SB-MER 2-8 - 3000587 Switching jumper, pitch: 8.2 mm, length: 24.7 mm, width: 16.4 mm, number of positions: 2, color: gray/orange     Switching lock 04/02/2018   Page 20 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Switching lock - S-RT 5-T - 3049330 Switching lock, length: 15.65 mm, width: 8.3 mm, height: 26.5 mm, color: white     Terminal marking Zack marker strip - ZB 16:UNPRINTED - 0827461 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 16 x 10.5 mm     Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 16 - 0829146 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 14.8 x 9.6 mm     Zack marker strip - ZB 16,3:UNPRINTED - 0820222 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm     04/02/2018   Page 21 / 22 https://www.phoenixcontact.com/us/products/3049233 Test disconnect terminal block - RTO 5-T - 3049233 Accessories Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Test plugs - PS-8 - 3031005 Test plugs, color: red     Test plugs - PS-8/2,3MM RD - 3048564 Test plugs, color: red     Test socket Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/02/2018   Page 22 / 22