https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Bolt connection terminal block, nom. voltage: 1000 V, nominal current: 125 A, connection method: Bolt
connection, length: 84 mm, width: 20.3 mm, color: gray, mounting: NS 35/7,5, NS 35/15
Your advantages
Four bridge shafts per terminal block
Terminal point always freely accessible
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
25 pc
GTIN
GTIN
4046356140058
Weight per Piece (excluding packing)
81.600 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Note
Note: the BE-RT... path extension is to be used for non-insulated cable
lugs (see accessories).
Number of positions
1
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
35 mm²
11/06/2019 Page 1 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Technical data
General
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
4.06 W
Designation
Level 1 above 1 below 1
Maximum load current
125 A (with 35 mm² conductor cross section)
Nominal current IN
125 A
Nominal voltage UN
1000 V
Open side panel
Yes
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
10 N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
35 mm²
Short-time current
4.2 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.02 g²/Hz
Acceleration
0,8 g
Test duration per axis
5h
11/06/2019 Page 2 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Technical data
General
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
20.3 mm
End cover width
2.2 mm
Length
84 mm
Height NS 35/7,5
62.2 mm
Height NS 35/15
69.7 mm
Connection data
Note
Connection bolts
Connection
1 level
Connection method
Bolt connection
Screw thread
M8
Tightening torque, min
6 Nm
11/06/2019 Page 3 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Technical data
Connection data
Tightening torque max
10 Nm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
2.5 mm²
Conductor cross section flexible max.
35 mm²
Min. AWG conductor cross section, flexible
14
Max. AWG conductor cross section, flexible
2
Cable lug connection according to standard
DIN 46234
Min. cross section for cable lug connection
2.5 mm²
Max. cross section for cable lug connection
35 mm²
Hole diameter, min.
8.4 mm
Cable lug width, max.
16 mm
Bolt diameter
8 mm
Cable lug connection according to standard
DIN 46235
Hole diameter, min.
8.4 mm
Cable lug width, max.
14 mm
Bolt diameter
8 mm
Cable lug connection according to standard
DIN 46237
Min. cross section for cable lug connection
2.5 mm²
Max. cross section for cable lug connection
6 mm²
Hole diameter, min.
8.4 mm
Cable lug width, max.
14 mm
Bolt diameter
8 mm
Standards and Regulations
Connection in acc. with standard
CUL
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
11/06/2019 Page 4 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
ABS / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / cULus Recognized
11/06/2019 Page 5 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Approvals
Ex Approvals
IECEx / ATEX / EAC Ex
Approval details
ABS
UL Recognized
http://www.eagle.org/eagleExternalPortalWEB/
15-GD1354709-PDA
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
115 A
115 A
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
115 A
115 A
FILE E 60425
IECEE CB Scheme
http://www.iecee.org/
DE1-50525
VDE Zeichengenehmigung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
40022553
Nominal voltage UN
1000 V
Nominal current IN
125 A
mm²/AWG/kcmil
2.5-35
EAC
EAC-Zulassung
11/06/2019 Page 6 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Approvals
EAC
cULus Recognized
RU CDE.A*30.B.01742
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
11/06/2019 Page 7 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
11/06/2019 Page 8 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
11/06/2019 Page 9 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
11/06/2019 Page 10 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
11/06/2019 Page 11 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-RT 8 - 3049194
Cover, width: 2.2 mm, color: gray
Jumper
Plug-in bridge - FBS 2-10 - 3005947
Plug-in bridge, pitch: 10.2 mm, number of positions: 2, color: red
Plug-in bridge - FBS 5-10 - 3005948
Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: red
Plug-in bridge - FBS 5-10 BU - 1040620
Plug-in bridge, pitch: 10.2 mm, number of positions: 5, color: blue
11/06/2019 Page 12 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Accessories
Labeled terminal marker
Zack marker strip - ZB 16,3 CUS - 0824946
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm, Number of individual labels: 5
Zack marker strip - ZB 20,3 CUS - 0824948
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 20.3 mm, lettering field size: 10.5 x 20.25 mm, Number of individual labels: 5
Partition plate
Partition plate - TPN-UK - 3003062
Partition plate, length: 110 mm, width: 2 mm, height: 69 mm, color: gray
Protective cap
Path extension - BE-RT 8 - 3049916
Path extension, color: gray
Socket spanner
11/06/2019 Page 13 / 14
https://www.phoenixcontact.com/us/products/3049343
Bolt connection terminal block - RTO 8 - 3049343
Accessories
Tool - SHN 13 - 1209923
Socket wrench, wrench size 13 mm
Terminal marking
Zack marker strip - ZB 16,3:UNPRINTED - 0820222
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm, Number of individual
labels: 5
Zack marker strip - ZB 20,3:UNPRINTED - 0820248
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 20.3 mm, lettering field size: 10.5 x 20.25 mm, Number of individual
labels: 5
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/06/2019 Page 14 / 14
