3049518

https://www.phoenixcontact.com/us/products/3049518 Bolt connection terminal block - RTO 3 - 3049518 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bolt connection terminal block, Connection type: Bolt connection, Cross section: 0.1 mm² - 2.5 mm², AWG: 26 - 14, Nominal current: 24 A, Nominal voltage: 1000 V, Length: 66 mm, Width: 12.3 mm, Color: gray, Assembly: NS 35/7,5, NS 35/15 Product Features  Four bridge shafts per terminal block  Terminal point always freely accessible     Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 20.11 g Custom tariff number 85369010 Country of origin China Technical data General Note Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories). Number of levels 1 Number of connections 2 Nominal cross section 2.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Pollution degree 3 12/01/2015   Page 1 / 6 https://www.phoenixcontact.com/us/products/3049518 Bolt connection terminal block - RTO 3 - 3049518 Technical data General Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 24 A (with a 2.5 mm² conductor cross section) Nominal current IN 24 A Nominal voltage UN 1000 V Open side panel ja Surge voltage test setpoint 9.8 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Tight fit on carrier NS 35 Setpoint 1N Result of tight fit test Test passed Requirements, voltage drop ≤ 3.2 mV Result of voltage drop test Test passed Temperature-rise test Test passed Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Short circuit stability result Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0.8g Test duration per axis 5h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 12/01/2015   Page 2 / 6 https://www.phoenixcontact.com/us/products/3049518 Bolt connection terminal block - RTO 3 - 3049518 Technical data General Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 120 °C Dimensions Width 12.3 mm End cover width 2.2 mm Length 66 mm Height NS 35/7,5 49.9 mm Height NS 35/15 57.4 mm Connection data Note Connection bolts Connection method Bolt connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.1 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.1 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Cable lug connection according to standard DIN 46 234 Min. cross section for cable lug connection 0.5 mm² Max. cross section for cable lug connection 2.5 mm² Hole diameter 3.2 mm Width 6 mm Bolt diameter 3 mm Cable lug connection according to standard DIN 46237 Min. cross section for cable lug connection 1 mm² Max. cross section for cable lug connection 2.5 mm² Hole diameter 3.2 mm Width 6 mm Bolt diameter 3 mm Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm 12/01/2015   Page 3 / 6 https://www.phoenixcontact.com/us/products/3049518 Bolt connection terminal block - RTO 3 - 3049518 Technical data Standards and Regulations Connection in acc. with standard CUL IEC 60947-7-1 DIN 46 234 DIN 46237 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / VDE Zeichengenehmigung / cUL Recognized / ABS / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / cULus Recognized 12/01/2015   Page 4 / 6 https://www.phoenixcontact.com/us/products/3049518 Bolt connection terminal block - RTO 3 - 3049518 Approvals Ex Approvals ATEX / IECEx / EAC Ex Approvals submitted Approval details UL Recognized    B C Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V VDE Zeichengenehmigung      mm²/AWG/kcmil 0.14-2.5 Nominal current IN 24 A Nominal voltage UN 1000 V cUL Recognized    B C Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V ABS  IECEE CB Scheme  12/01/2015   Page 5 / 6 https://www.phoenixcontact.com/us/products/3049518 Bolt connection terminal block - RTO 3 - 3049518 Approvals VDE Zeichengenehmigung      mm²/AWG/kcmil 0.14-2.5 Nominal current IN 24 A Nominal voltage UN 1000 V EAC  EAC  cULus Recognized  Drawings Circuit diagram Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/01/2015   Page 6 / 6