3049550

https://www.phoenixcontact.com/us/products/3049550 High Current Connectors - HV M8/2 - 3049550 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) High Current Connectors, Connection method: Bolt connection, Cross section: 2.5 mm² - 50 mm², AWG: 14 - 1/0, Width: 21 mm, Height: 63.5 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features  Comprehensive range of accessories for safe and user-friendly wiring of conductors up to 120 mm²  Two different partition plates can be used for the range of single and double-bolt terminal blocks  2 and 3-pos. connection rails can be used for potential distribution  Spring washers are used to prevent hexagonal nuts from loosening  Secure connection of up to 4 conductors with cable lugs according to DIN 46234, 46235, and 46237 in a small amount of space  The feed-through window provided in the partition plates can be easily removed for mounting the connection rails   Key Commercial Data Packing unit 1 pc Minimum order quantity 25 pc Weight per Piece (excluding packing) 119.41 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Nominal cross section 50 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Pollution degree 3 12/01/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/3049550 High Current Connectors - HV M8/2 - 3049550 Technical data General Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 150 A Maximum load current 150 A Nominal voltage UN 1000 V Open side panel nein Surge voltage test setpoint 9.8 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Tight fit on carrier NS 35 Setpoint 10 N Result of tight fit test Test passed Requirements, voltage drop ≤ 3.2 mV Result of voltage drop test Test passed Temperature-rise test Test passed Conductor cross section short circuit testing 50 mm² Short-time current 6 kA Short circuit stability result Test passed Proof of thermal characteristics (needle flame) effective duration 10 s Result of thermal test Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0.8g Test duration per axis 5h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 12/01/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/3049550 High Current Connectors - HV M8/2 - 3049550 Technical data General Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 120 °C Dimensions Length 67 mm Width 21 mm Height 63.5 mm Height NS 35/7,5 66 mm Height NS 35/15 73.5 mm Connection data Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 50 mm² Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 50 mm² Conductor cross section AWG min. 14 Conductor cross section AWG max. 1/0 Screw thread M8 Tightening torque, min 6 Nm Tightening torque max 12 Nm Connection method Bolt connection Connection in acc. with standard DIN 46 234 Min. cross section 2.5 mm² Max. cross section 50 mm² Bolt diameter 8 mm Tightening torque, min 6 Nm Tightening torque max 12 Nm Connection in acc. with standard DIN 46,235 Min. cross section 6 mm² Max. cross section 35 mm² Bolt diameter 8 mm Tightening torque, min 6 Nm Tightening torque max 12 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 DIN 46 234 12/01/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/3049550 High Current Connectors - HV M8/2 - 3049550 Technical data Standards and Regulations DIN 46,235 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / CSAus / EAC / EAC / cCSAus Ex Approvals 12/01/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/3049550 High Current Connectors - HV M8/2 - 3049550 Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 3 Nominal current IN 130 A Nominal voltage UN 1000 V CSAus      mm²/AWG/kcmil 3 Nominal current IN 130 A Nominal voltage UN 1000 V EAC  EAC  cCSAus  Drawings Circuit diagram Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/01/2015   Page 5 / 5