3049563

https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) High Current Connectors, nom. voltage: 1000 V, nominal current: 269 A, connection method: Bolt connection, number of connections: 2, width: 32 mm, height: 73.5 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Why buy this product  Two different partition plates can be used for the range of single and double-bolt terminal blocks  Comprehensive range of accessories for safe and user-friendly wiring of conductors up to 120 mm²  2 and 3-pos. connection rails can be used for potential distribution  Spring washers are used to prevent hexagonal nuts from loosening  Secure connection of up to 4 conductors with cable lugs according to DIN 46234, 46235, and 46237 in a small amount of space  The feed-through window provided in the partition plates can be easily removed for mounting the connection rails Key Commercial Data Packing unit 1 STK Minimum order quantity 10 STK GTIN GTIN 4046356310314 Weight per Piece (excluding packing) 223.030 g Custom tariff number 39269097 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Nominal cross section 120 mm² 03/11/2018   Page 1 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Technical data General Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 8.68 W Connection in acc. with standard IEC 60947-7-1 Nominal current IN 269 A Maximum load current 269 A Nominal voltage UN 1000 V Open side panel No Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 15 N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 120 mm² Short-time current 14.4 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 10 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0,8 g Test duration per axis 5h 03/11/2018   Page 2 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Technical data General Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Length 67 mm Width 32 mm Height 73.5 mm Height NS 35/7,5 76 mm Height NS 35/15 83.5 mm Bolt length 26 mm Connection data Connection method Bolt connection Conductor cross section flexible min. 6 mm² Conductor cross section flexible max. 120 mm² Cable lug connection according to standard DIN 46234 03/11/2018   Page 3 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Technical data Connection data Min. cross section for cable lug connection 6 mm² Max. cross section for cable lug connection 120 mm² Bolt length 26 mm Bolt diameter 10 mm Tightening torque, min 10 Nm Tightening torque max 20 Nm Cable lug connection according to standard DIN 46235 Min. cross section for cable lug connection 10 mm² Max. cross section for cable lug connection 95 mm² Bolt length 26 mm Bolt diameter 10 mm Tightening torque, min 10 Nm Tightening torque max 20 Nm Cable lug connection according to standard DIN 46237 Max. cross section for cable lug connection 6 mm² Bolt length 26 mm Bolt diameter 10 mm Tightening torque, min 10 Nm Tightening torque max 20 Nm Screw thread M10 Tightening torque, min 10 Nm Tightening torque max 20 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 03/11/2018   Page 4 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / CSAus / EAC / cCSAus Ex Approvals 03/11/2018   Page 5 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/     mm²/AWG/kcmil 00 Nominal current IN 225 A Nominal voltage UN 1000 V CSAus    245029  http://www.csagroup.org/services-industries/product-listing/     mm²/AWG/kcmil 00 Nominal current IN 225 A Nominal voltage UN 1000 V  245029 EAC      EAC-Zulassung cCSAus    http://www.csagroup.org/us/en/services/ testing-and-certification/certified-product-listing   Accessories Accessories Bridge Connection element - HV M10/1-VS 2 - 3049466 Connection element, length: 62 mm, width: 25 mm, height: 4 mm, number of positions: 2, color: silver     03/11/2018   Page 6 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Accessories Connection element - HV M10/1-VS 3 - 3049479 Connection element, length: 96 mm, width: 25 mm, height: 4 mm, number of positions: 3, color: silver     Cover profile Cover profile - HV M10/1-AP - 3049495 Cover profile, for single-bolt terminal block M10, length: 156 mm, width: 32 mm, height: 6.5 mm, color: gray     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     03/11/2018   Page 7 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Accessories DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper, uncoated, length: 2000 mm, color: copper-colored     03/11/2018   Page 8 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     End block End clamp - E/AL-NS 35 - 1201662 End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum     Labeled terminal marker Warning label - WS-4K - 1004584 Adhesive warning plate, self-adhesive, black print: lightning flash with mixed verson - "Vorsicht Spannung - Attention Danger" size of label: 13 x 23.5 mm     Warning label - WS-2K - 1004513 Adhesive warning plate, self-adhesive, black print: lightning flash with mixed verson - "Vorsicht Spannung - Attention Danger" size of label: 32 x 26 mm     Zack marker strip - ZB 12 CUS - 0824942 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm     03/11/2018   Page 9 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Accessories Marker for terminal blocks - ZB 12,LGS:L1-N,PE - 0812146 Marker for terminal blocks, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm     Marker for terminal blocks - UC-TM 12 CUS - 0824613 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 12 CUS - 0829630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm     Partition plate Separating plate - HV M12/2-TP - 3049709 Separating plate, length: 156 mm, width: 2 mm, color: gray     Terminal marking 03/11/2018   Page 10 / 11 https://www.phoenixcontact.com/us/products/3049563 High Current Connectors - HV M10/2 - 3049563 Accessories Zack marker strip - ZB 12:UNPRINTED - 0812120 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm     Marker for terminal blocks - UC-TM 12 - 0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 12 - 0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 03/11/2018   Page 11 / 11