3049767

https://www.phoenixcontact.com/us/products/3049767 Bolt connection terminal block - RTO 5 BU - 3049767 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block with bolt connection, cross section: 0.1 - 6 mm², AWG: 26 - 10, width 16.3 mm, color: Gray Product Features ■ ■ Four bridge shafts per terminal block Terminal point always freely accessible Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Weight per Piece (excluding packing) 30.44 g Custom tariff number 85369010 Country of origin Germany Technical data General Note Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories). Number of levels 1 Number of connections 2 Nominal cross section 6 mm² Color blue Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 04/12/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/3049767 Bolt connection terminal block - RTO 5 BU - 3049767 Technical data General Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 41 A (with 6 mm² conductor cross section) Nominal current IN 41 A Nominal voltage UN 1000 V Open side panel Yes Dimensions Width 16.3 mm End cover width 2.2 mm Length 66 mm Height NS 35/7,5 49.9 mm Height NS 35/15 57.4 mm Connection data Note Connection bolts Connection method Bolt connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.1 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.1 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Cable lug connection according to standard DIN 46 234 Min. cross section for cable lug connection 0.5 mm² Max. cross section for cable lug connection 6 mm² Hole diameter, min. 5.3 mm Cable lug width, max. 10 mm Bolt diameter 5 mm Cable lug connection according to standard DIN 46237 Min. cross section for cable lug connection 1 mm² Max. cross section for cable lug connection 6 mm² Hole diameter, min. 5.3 mm Cable lug width, max. 10 mm 04/12/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/3049767 Bolt connection terminal block - RTO 5 BU - 3049767 Technical data Connection data Bolt diameter 5 mm Screw thread M5 Tightening torque, min 2.5 Nm Tightening torque max 3 Nm Standards and Regulations Connection in acc. with standard CUL IEC 60947-7-1 DIN 46 234 DIN 46237 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 04/12/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/3049767 Bolt connection terminal block - RTO 5 BU - 3049767 Approvals Approvals Approvals UL Recognized / cUL Recognized / ABS / EAC / VDE Zeichengenehmigung / IECEE CB Scheme / cULus Recognized Ex Approvals ATEX / IECEx / EAC Ex Approvals submitted Approval details UL Recognized    B C Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V   B C Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V cUL Recognized  ABS  EAC  VDE Zeichengenehmigung      mm²/AWG/kcmil 0.14-6 Nominal current IN 41 A 04/12/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/3049767 Bolt connection terminal block - RTO 5 BU - 3049767 Approvals     Nominal voltage UN 1000 V IECEE CB Scheme  cULus Recognized  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/12/2016   Page 5 / 5