3049851

https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Feed-through terminal block with bolt connection technology and transparent safety contact hood, cross section: 0.1 - 6 mm², AWG: 26 - 10, width 16.3 mm, color: blue The figure shows a version of the article Product Features  Four bridge shafts per terminal block  Terminal point always freely accessible Key commercial data Packing unit 11 Minimum order quantity 50 1 Weight per Piece (excluding packing) 33.04 GRM Custom tariff number 85369010 Country of origin China Technical data General Note Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories). Number of levels 1 Number of connections 2 Color blue Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 41 A (with 6 mm² conductor cross section) Rated surge voltage 8 kV Pollution degree 3 19.11.2013   Page 1 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Technical data General Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 41 A Nominal voltage UN 1000 V Open side panel ja Dimensions Width 16.3 mm Length 66 mm Height NS 35/7,5 51 mm Height NS 35/15 58.5 mm Connection data Note Connection bolts Conductor cross section solid min. 0.1 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 10 Conductor cross section stranded min. 0.1 mm² Conductor cross section stranded max. 6 mm² Min. AWG conductor cross section, stranded 26 Max. AWG conductor cross section, stranded 10 Min. cross section for cable lug connection 0.5 mm² Max. cross section for cable lug connection 6 mm² Connection method Bolt connection Screw thread M5 Tightening torque, min 2.5 Nm Tightening torque max 3 Nm Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 19.11.2013   Page 2 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Classifications eCl@ss eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST / ABS / GOST Ex Approvals Approvals submitted Approval details GOST  ABS  19.11.2013   Page 3 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Approvals GOST  Accessories Accessories Bridge Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBS 3-8 - 3030297 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBS 4-8 - 3030307 Plug-in bridge, Number of positions: 4, Color: red     Plug-in bridge - FBS 5-8 - 3030310 Plug-in bridge, Number of positions: 5, Color: red     19.11.2013   Page 4 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories Plug-in bridge - FBS 10-8 - 3030323 Plug-in bridge, Number of positions: 10, Color: red     Plug-in bridge - FBSRH 2-8 - 3033802 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBSRH 3-8 - 3033803 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBSRH 4-8 - 3033804 Plug-in bridge, Number of positions: 4, Color: red     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     19.11.2013   Page 5 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-RT 5-T - 3049291 End cover, Length: 91.4 mm, Width: 2.2 mm, Color: gray     19.11.2013   Page 6 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories Path extension - BE-RT 3/5 - 3049819 Path extension, Color: gray     Spacer plate - DP PS-8 - 3036741 Spacer plate, Color: red     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, Color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, Color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, Color: blue     19.11.2013   Page 7 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, Color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, Color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black     Labeled terminal marker Zack marker strip - ZB 16 CUS - 0827463 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm     19.11.2013   Page 8 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories Marker for terminal blocks - UC-TM 16 CUS - 0824621 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 16 CUS - 0829637 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm     Zack marker strip - ZB 16,3 CUS - 0824946 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     19.11.2013   Page 9 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     19.11.2013   Page 10 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     19.11.2013   Page 11 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     19.11.2013   Page 12 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Partition plate Separating plate - TPNS-UK - 0706647 Separating plate, Length: 80 mm, Width: 2 mm, Height: 70 mm, Color: gray     Socket spanner Tool - SHN 8 - 1209868 Socket wrench, wrench size 8 mm     Terminal marking 19.11.2013   Page 13 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories Zack marker strip - ZB 16:UNPRINTED - 0827461 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 16 x 10.5 mm     Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 16 - 0829146 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm     Zack marker strip - ZB 16,3:UNPRINTED - 0820222 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, Color: silver     19.11.2013   Page 14 / 15 https://www.phoenixcontact.com/us/products/3049851 Feed-through terminal block - RTO 5-TC BU - 3049851 Accessories Test adapter - PAI-4-N GY - 3032871 Test adapter, Color: gray     Test adapter - PS-8 - 3031005 Test adapter, Color: red     Test adapter - PS-8/2,3MM RD - 3048564 Test adapter, Color: red     Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.11.2013   Page 15 / 15