3049990

https://www.phoenixcontact.com/us/products/3049990 Test disconnect terminal block - RTO 5-T-TC - 3049990 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Test disconnect terminal block with bolt connection technology and transparent safety contact hood, cross section: 0.1 - 6 mm², AWG: 26 - 10, width 16.3 mm, color: gray Product Features ■ ■ ■ ■ ■ ■ Four bridge shafts per terminal block Terminal point always freely accessible Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system The screws are secured against loosening by captive spring-loaded spacers Large-surface labeling options in the terminal center and above the terminal points The use of the switching lock effectively prevents unintentional switching Key Commercial Data Packing unit 1 pc Minimum order quantity 25 pc Weight per Piece (excluding packing) 43.2 g Custom tariff number 85369010 Country of origin China Technical data General Note Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories). Number of levels 1 Number of connections 2 Nominal cross section 6 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 03/14/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/3049990 Test disconnect terminal block - RTO 5-T-TC - 3049990 Technical data General Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 41 A (with 6 mm² conductor cross section) Nominal current IN 41 A Nominal voltage UN 1000 V (Rated voltage for open disconnect point 500 V) Open side panel Yes Dimensions Width 16.3 mm End cover width 2.2 mm Length 91.4 mm Height NS 35/7,5 51 mm Height NS 35/15 58.5 mm Connection data Note Connection bolts Connection method Bolt connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.1 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.1 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Cable lug connection according to standard DIN 46 234 Min. cross section for cable lug connection 0.5 mm² Max. cross section for cable lug connection 6 mm² Hole diameter, min. 5.3 mm Cable lug width, max. 10 mm Bolt diameter 5 mm Cable lug connection according to standard DIN 46237 Min. cross section for cable lug connection 1 mm² Max. cross section for cable lug connection 6 mm² 03/14/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/3049990 Test disconnect terminal block - RTO 5-T-TC - 3049990 Technical data Connection data Hole diameter, min. 5.3 mm Cable lug width, max. 10 mm Bolt diameter 5 mm Screw thread M5 Tightening torque, min 2.5 Nm Tightening torque max 3 Nm Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 DIN 46 234 DIN 46237 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141126 eCl@ss 4.1 27141126 eCl@ss 5.0 27141126 eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 03/14/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/3049990 Test disconnect terminal block - RTO 5-T-TC - 3049990 Classifications UNSPSC UNSPSC 13.2 39121410 Approvals Approvals Approvals ABS / EAC Ex Approvals Approvals submitted Approval details ABS  EAC  Drawings 03/14/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/3049990 Test disconnect terminal block - RTO 5-T-TC - 3049990 Circuit diagram Connection diagram 1 2 1 2 1 2 1 2 k l k l k l k l a b c d Simple current transformer test circuit a = normal operation b = measured value testing c = transformer testing d = relay testing Connection diagram Connection diagram 1 2 3 4 5 6 1 2 3 4 5 6 k l k l k l k k k l l l L1 L1 L2 L2 L3 L3 Three-phase transducer test set Three-phase linked transducer test set Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 5 / 5