3050002

https://www.phoenixcontact.com/us/products/3050002 Feed-through terminal block - RTO 8-TC - 3050002 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block with bolt connection technology and transparent safety contact hood, cross section: 2.5 – 35 mm², AWG: 14 - 2, width 20.2 mm, color: gray Product Features ■ ■ Four bridge shafts per terminal block Terminal point always freely accessible Key Commercial Data Packing unit 1 pc Minimum order quantity 25 pc Weight per Piece (excluding packing) 86.4 g Custom tariff number 85369010 Country of origin China Technical data General Note Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories). Number of levels 1 Number of connections 2 Nominal cross section 35 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I 03/07/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/3050002 Feed-through terminal block - RTO 8-TC - 3050002 Technical data General Maximum load current 125 A (with 35 mm² conductor cross section) Nominal current IN 125 A Nominal voltage UN 1000 V Open side panel Yes Number of positions 1 Dimensions Width 20.2 mm End cover width 2.2 mm Length 84 mm Height 63.20 mm Height NS 35/7,5 63.8 mm Height NS 35/15 71.3 mm Connection data Note Connection bolts Connection method Bolt connection Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG min. 14 Conductor cross section AWG max. 2 Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 35 mm² Min. AWG conductor cross section, flexible 14 Max. AWG conductor cross section, flexible 2 Cable lug connection according to standard DIN 46 234 Min. cross section for cable lug connection 2.5 mm² Max. cross section for cable lug connection 35 mm² Hole diameter 8.4 mm Width 16 mm Bolt diameter 8 mm Cable lug connection according to standard DIN 46237 Min. cross section for cable lug connection 2.5 mm² Max. cross section for cable lug connection 6 mm² Hole diameter 8.4 mm Width 14 mm Bolt diameter 8 mm Screw thread M8 03/07/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/3050002 Feed-through terminal block - RTO 8-TC - 3050002 Technical data Connection data Tightening torque, min 6 Nm Tightening torque max 10 Nm Standards and Regulations Connection in acc. with standard DIN 46 234 DIN 46237 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 03/07/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/3050002 Feed-through terminal block - RTO 8-TC - 3050002 Approvals Approvals ABS / EAC / EAC Ex Approvals Approvals submitted Approval details ABS  EAC  EAC  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/07/2016   Page 4 / 4