https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, connection method: Quick connection, Screw connection, cross section: 0.25 mm² 1.5 mm², AWG: 24 - 16, width: 5.2 mm, color: gray, mounting: NS 35/7,5, NS 35/15
Why buy this product
The hybrid versions combine the advantages of the different connection technologies
The time-saving QUICKON fast connection is used on the control cabinet side
The screw connection is used on the connection side
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
GTIN
GTIN
4017918975722
Weight per Piece (excluding packing)
9.200 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of levels
1
Number of connections
2
Nominal cross section
1.5 mm²
Color
gray
Insulating material
PA
03/11/2018 Page 1 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Technical data
General
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
0.56 W
Ambient temperature (actuation)
-10 °C ... 90 °C
Connection method
Quick connection
Connection in acc. with standard
IEC 60947-7-1
Maximum load current
17.5 A (with 1.5 mm² conductor cross section)
Nominal current IN
17.5 A
Nominal voltage UN
800 V
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Maximum load current
17.5 A (with 1.5 mm² conductor cross section)
Nominal current IN
17.5 A
Nominal voltage UN
800 V
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
1.5 mm² / 0.4 kg
0.14 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
03/11/2018 Page 2 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Technical data
General
Tractive force setpoint
10 N
Conductor cross section tensile test
1.5 mm²
Tractive force setpoint
40 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
5.2 mm
Length
58.8 mm
03/11/2018 Page 3 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Technical data
Dimensions
Height NS 35/7,5
42.8 mm
Height NS 35/15
50.3 mm
End cover width
2.2 mm
Connection data
Connection method
Quick connection
Connection in acc. with standard
IEC 60947-7-1
Max. wire diameter incl. insulation
3 mm
Conductor cross section solid min.
0.25 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Conductor cross section flexible min.
0.25 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible min. after 10 connections with the max.
solid conductor
0.25 mm²
Conductor cross section flexible max. after 10 connections with the max.
solid conductor
1.5 mm²
Conductor cross section solid min. after 10 connections with the max. solid
0.25 mm²
conductor
Conductor cross section solid max. after 10 connections with the max.
solid conductor
1.5 mm²
AWG min. after 10 connections with the max. rigid conductor
24
AWG max. after 10 connections with the max. rigid conductor
16
Cross section sensor cables, min.
0.25 mm²
Cross section sensor cables, max.
0.34 mm²
Connection in acc. with standard
IEC/EN 60079-7
Test certificate name
KEMA 04ATEX2226 U
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Material wire insulation
PVC / PE
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Stripping length
9 mm
03/11/2018 Page 4 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Technical data
Connection data
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.14 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, max.
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
IEC 60947-7-1
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
03/11/2018 Page 5 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141130
eCl@ss 4.1
27141130
eCl@ss 5.0
27141130
eCl@ss 5.1
27141130
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / GL / EAC / EAC / cULus Recognized
Ex Approvals
IECEx / ATEX / EAC Ex
03/11/2018 Page 6 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
mm²/AWG/kcmil
24-16
24-16
Nominal current IN
10 A
10 A
Nominal voltage UN
600 V
600 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
mm²/AWG/kcmil
24-16
24-16
Nominal current IN
10 A
10 A
Nominal voltage UN
600 V
600 V
cUL Recognized
13631
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
mm²/AWG/kcmil
24-16
24-16
Nominal current IN
10 A
10 A
Nominal voltage UN
600 V
600 V
FILE E 60425
FILE E 60425
GL
http://exchange.dnv.com/tari/
6003009 HH
EAC
EAC-Zulassung
EAC
7500651.22.01.00246
03/11/2018 Page 7 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Approvals
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Component plug terminal block
Component connector - P-CO 2-5 R47K - 3032447
Component connector, with 47 kOhm resistor for open circuit monitoring, pitch: 5.2 mm, length: 8.9 mm, width: 4.1 mm,
height: 34.8 mm, number of positions: 2, color: black
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
03/11/2018 Page 8 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
03/11/2018 Page 9 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: white
03/11/2018 Page 10 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
03/11/2018 Page 11 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, in acc. with EN 60715: 2001,
material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Documentation
Mounting material - QTC-IL - 3039926
Operating decal for the QTS terminal block
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
03/11/2018 Page 12 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-QTCU 1,5 - 3206283
End cover, length: 58.8 mm, width: 2.2 mm, height: 42.8 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
03/11/2018 Page 13 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
03/11/2018 Page 14 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-5 - 3030161
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-5 - 3030174
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 14.2 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-5 - 3030187
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 19.4 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-5 - 3030190
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 24.6 mm, number of positions: 5, color: red
03/11/2018 Page 15 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Plug-in bridge - FBS 10-5 - 3030213
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 50.6 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-5 - 3030226
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: red
Plug-in bridge - FBSR 2-5 - 3033702
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: red
Plug-in bridge - FBSR 3-5 - 3001591
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: red
Plug-in bridge - FBSR 4-5 - 3001592
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: red
03/11/2018 Page 16 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Plug-in bridge - FBSR 5-5 - 3001593
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: red
Plug-in bridge - FBSR 10-5 - 3033710
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-5 BU - 3036877
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-5 BU - 3036880
Plug-in bridge, pitch: 5.2 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-5 BU - 3036893
Plug-in bridge, pitch: 5.2 mm, number of positions: 4, color: blue
03/11/2018 Page 17 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Plug-in bridge - FBS 5-5 BU - 3036903
Plug-in bridge, pitch: 5.2 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-5 BU - 3036916
Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-5 BU - 3036929
Plug-in bridge, pitch: 5.2 mm, number of positions: 20, color: blue
Plug-in bridge - FBS 50-5 BU - 3032114
Plug-in bridge, pitch: 5.2 mm, number of positions: 50, color: blue
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
03/11/2018 Page 18 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500,
mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm
Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm
03/11/2018 Page 19 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm
Zack Marker strip, flat - ZBF 5 CUS - 0825025
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 491 500, mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
03/11/2018 Page 20 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.15 x 5.15 mm
Marker for terminal blocks - UC-TMF 5 CUS - 0824638
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 CUS - 0829658
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Partition plate - ATP-QTC - 3206209
Partition plate, length: 64.4 mm, width: 2 mm, height: 46 mm, color: gray
03/11/2018 Page 21 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Spacer plate - DP PS-5 - 3036725
Spacer plate, length: 22.4 mm, width: 5.2 mm, height: 29 mm, number of positions: 1, color: red
Reducing bridge
Reducing bridge - RB ST 6-(2,5/4) - 3030860
Reducing bridge, pitch: 9 mm, length: 30 mm, width: 14.3 mm, number of positions: 2, color: red
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm
03/11/2018 Page 22 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size:
10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into tall marker groove, for
terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm
Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 5 mm, lettering field size: 5.1 x 5.2 mm
Marker for terminal blocks - UC-TMF 5 - 0818153
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field
size: 4.6 x 5.1 mm
Marker for terminal blocks - UCT-TMF 5 - 0828744
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snap into flat marker groove, for
terminal block width: 5.2 mm, lettering field size: 4.4 x 4.7 mm
Test plug terminal block
03/11/2018 Page 23 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver
Test plugs - PS-5 - 3030983
Test plugs, color: red
Test plugs - PS-5/2,3MM RD - 3038723
Test plugs, color: red
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
03/11/2018 Page 24 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
03/11/2018 Page 25 / 26
https://www.phoenixcontact.com/us/products/3050015
Feed-through terminal block - QTCU 1,5 - 3050015
Accessories
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
03/11/2018 Page 26 / 26
