3056925

https://www.phoenixcontact.com/us/products/3056925 Panel feed-through terminal block - PWO 4-POT-SCM/S - 3056925 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through terminal block, Connection method: Push-in spring connection, Slip-on connection, Load current : 18 A, Cross section: 0.2 mm² - 4 mm², AWG 24 - 12, Width: 8.1 mm, Color: gray Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK Weight per Piece (excluding packing) 8.800 g Custom tariff number 85369010 Country of origin China Technical data Environmental Product Compliance China RoHS No hazardous substances above threshold values General Number of levels 1 Number of connections 2 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Maximum load current 20 A Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I 09/08/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/3056925 Panel feed-through terminal block - PWO 4-POT-SCM/S - 3056925 Technical data General Ambient temperature (operation) -40 °C ... 105 °C Connection in acc. with standard IEC 60947-7-1 Nominal current IN 18 A Maximum load current 18 A Nominal voltage UN 800 V Open side panel No Number of positions 1 Dimensions Width 8.1 mm Plate thickness 1 mm ... 4 mm Connection data Connection side Outside Connection method Push-in spring connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 6 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. Stripping length 10 mm Internal cylindrical gage A4 Connection side Inside Connection method Slip-on connection Slip-on connection 6.3 x 0.8 mm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 09/08/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/3056925 Panel feed-through terminal block - PWO 4-POT-SCM/S - 3056925 Drawings Dimensional drawing Dimensional drawing 46 6,4 Ø3,2 30,5 11,8 20 30 12,5 27 12,5 Ø4,5 7,5 8,1 8,1 10,55* 1-4 *Only when using the PW 4-F flange plate Classifications eCl@ss eCl@ss 4.0 27141131 eCl@ss 4.1 27141131 eCl@ss 5.0 27141134 eCl@ss 5.1 27141134 eCl@ss 6.0 27141134 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 eCl@ss 9.0 27141134 ETIM ETIM 4.0 EC001283 ETIM 5.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 09/08/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/3056925 Panel feed-through terminal block - PWO 4-POT-SCM/S - 3056925 Approvals Approvals UL Recognized / CSA Ex Approvals Approval details UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   B C D mm²/AWG/kcmil 24-10 24-10 24-10 Nominal current IN 30 A 30 A 5A Nominal voltage UN 300 V 300 V 600 V CSA   http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631   B C D mm²/AWG/kcmil 24-10 24-10 24-10 Nominal current IN 30 A 30 A 5A Nominal voltage UN 300 V 300 V 600 V Accessories Accessories Insertion bridge Insertion bridge - EB 2- 8 - 0202154 Insertion bridge, Pitch: 8 mm, Number of positions: 2, Color: gray     09/08/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/3056925 Panel feed-through terminal block - PWO 4-POT-SCM/S - 3056925 Accessories Insertion bridge - EB 3- 8 - 0202141 Insertion bridge, Pitch: 8 mm, Number of positions: 3, Color: gray     Insertion bridge - EB 10- 8 - 0202138 Insertion bridge, Pitch: 8 mm, Number of positions: 10, Color: gray     Insertion bridge - EB 1/3/5/7-8 - 3072340 Insertion bridge, Pitch: 16.4 mm, Length: 24 mm, Width: 55.4 mm, Number of positions: 4, Pin assignment: 1, 3, 5, 7, Color: gray     Insertion bridge - EB 1/3/5-8 - 3072341 Insertion bridge, Pitch: 16.4 mm, Length: 24 mm, Width: 39 mm, Number of positions: 3, Pin assignment: 1,3,5, Color: gray     Labeled terminal marker Zack marker strip - ZB 8 CUS - 0825011 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm     09/08/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/3056925 Panel feed-through terminal block - PWO 4-POT-SCM/S - 3056925 Accessories Marker for terminal blocks - UC-TMF 8 CUS - 0824654 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 5.1 mm     Marker for terminal blocks - UC-TM 8 CUS - 0824597 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm     Zack Marker strip, flat - ZBF 8 CUS - 0825030 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 8 mm, Lettering field: 5.15 x 8.15 mm     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Marker for terminal blocks - TMT (EX9,5)R - 0828295 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X, Mounting type: Snap into universal marker groove, Snap into tall marker groove, Lettering field: 9.5 x 50000 mm     09/08/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/3056925 Panel feed-through terminal block - PWO 4-POT-SCM/S - 3056925 Accessories Marker for terminal blocks - UC-TM 8 - 0818072 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm     Marker for terminal blocks - UC-TMF 8 - 0818137 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 5.1 mm     Zack marker strip - ZB 8:UNBEDRUCKT - 1052002 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm     Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 8 mm, Lettering field: 5.15 x 8.15 mm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/08/2016   Page 7 / 7