3060296

https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 500 V, nominal current: 32 A, connection method: Screw/plug-in connection, number of connections: 4, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Your advantages  Plugs with different conductor exit directions (lateral or upwards) enable practical, efficient wiring. This results in a high degree of flexibility, which is required in various areas of application.  Screw flanges for securely latching plugs Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356090421 Weight per Piece (excluding packing) 16.290 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 4 Potentials 1 Nominal cross section 4 mm² Color gray Insulating material PA 09/10/2019   Page 1 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Technical data General Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W Designation Level 1 below 1+2 Maximum load current 32 A (with 6 mm² conductor cross section) Nominal current IN 32 A (observe derating) Nominal voltage UN 500 V Open side panel Yes Insertion/withdrawal cycles mechanical 100 Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.02 g²/Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) 09/10/2019   Page 2 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Technical data General Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm End cover width 2.2 mm Length 82.4 mm Height NS 35/7,5 47.5 mm Height NS 35/15 55 mm Connection data Connection method Screw/plug-in connection Screw thread M3 Stripping length 9 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection in acc. with standard IEC 61984 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 09/10/2019   Page 3 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Technical data Connection data Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Internal cylindrical gage A4 Standards and Regulations Connection in acc. with standard CSA IEC 61984 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/10/2019   Page 4 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Diagram Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 09/10/2019   Page 5 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Classifications ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B C D Nominal voltage UN 300 V 150 V 300 V Nominal current IN 30 A 30 A 10 A mm²/AWG/kcmil 26-10 26-10 26-10  13631 09/10/2019   Page 6 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10 EAC  cULus Recognized   FILE E 60425  FILE E 60425     RU CDE.A*30.B.01742      Accessories Accessories Coding element Coding star - PC - 3040588 Coding star, length: 3 mm, width: 3 mm, height: 6 mm, color: red     DIN rail 09/10/2019   Page 7 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     09/10/2019   Page 8 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     09/10/2019   Page 9 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     09/10/2019   Page 10 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     09/10/2019   Page 11 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-UT 4-QUATTRO/ 2P - 3045648 End cover, length: 81.4 mm, width: 2.2 mm, height: 39.8 mm, color: gray     Cover segment - DS-UT 2,5/4 - 3047109 Cover segment, color: gray     Flange Screw flange - UT 4-QUATTRO/ 2P-F - 3060335 Screw flange, for screwing COMBI plugs, with the same structure and pitch as the relevant COMBI terminal blocks     09/10/2019   Page 12 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     09/10/2019   Page 13 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red     09/10/2019   Page 14 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red     Plug-in bridge - FBS 6-6 - 1008238 Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red     Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red     Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red     Plug-in bridge - FBS 50-6 - 3032224 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red     09/10/2019   Page 15 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red     Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red     Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red     Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red     Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red     09/10/2019   Page 16 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 3-6 BU - 3036945 Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue     Plug-in bridge - FBS 4-6 BU - 3036958 Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue     Plug-in bridge - FBS 5-6 BU - 3036961 Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue     Plug-in bridge - FBS 10-6 BU - 3032198 Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue     09/10/2019   Page 17 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug-in bridge - FBS 20-6 BU - 3032208 Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue     Plug-in bridge - FBS 50-6 BU - 3032211 Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue     Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     09/10/2019   Page 18 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Marker pen 09/10/2019   Page 19 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Partition plate Partition plate - ATP-UT-QUATTRO - 3047196 Partition plate, length: 69.7 mm, width: 2.2 mm, height: 52.5 mm, color: gray     Plug Connector housing - CP 4/6 - 3061049 Connector housing, length: 36.9 mm, width: 20.7 mm, height: 52.7 mm, number of positions: 6, color: gray     Connector housing - CP 4/2 - 1066559 Connector housing, nominal current: 10 A, pitch: 6.2 mm, width: 11.3 mm, height: 32.4 mm, number of positions: 2, color: gray     Connector housing - CP 4/3 - 1066560 Connector housing, nominal current: 10 A, pitch: 6.2 mm, width: 17.5 mm, height: 32.4 mm, number of positions: 3, color: gray     09/10/2019   Page 20 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Connector housing - CP 4/4 - 1066561 Connector housing, nominal current: 10 A, pitch: 6.2 mm, width: 23.5 mm, height: 32.4 mm, number of positions: 4, color: gray     Connector housing - CP 4/5 - 1066562 Connector housing, nominal current: 10 A, pitch: 6.2 mm, width: 29.8 mm, height: 32.4 mm, number of positions: 5, color: gray     Connector housing - CP 4/6 - 1066563 Connector housing, nominal current: 10 A, pitch: 6.2 mm, width: 35.9 mm, height: 32.4 mm, number of positions: 6, color: gray     Connector housing - CP 4/8 - 1066564 Connector housing, nominal current: 10 A, pitch: 6.2 mm, width: 48.2 mm, height: 32.4 mm, number of positions: 8, color: gray     Connector housing - CP 4/10 - 1066565 Connector housing, nominal current: 10 A, pitch: 6.2 mm, width: 60.5 mm, height: 32.4 mm, number of positions: 10, color: gray     Screwdriver tools 09/10/2019   Page 21 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Short-circuit connector Short-circuit connector - FBSRH 2-6 - 3033812 Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red     Terminal marking Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     09/10/2019   Page 22 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Test plugs - PS-6 - 3030996 Test plugs, color: red     Test plugs - PS-6/2,3MM RD - 3038736 Test plugs, color: red     Test socket Test adapter - PAI-4-FIX-5/6 BU - 3035975 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     09/10/2019   Page 23 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Test adapter - PAI-4-FIX-5/6 OG - 3035974 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 YE - 3035977 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 RD - 3035976 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 GN - 3035978 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BK - 3035980 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     09/10/2019   Page 24 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Test adapter - PAI-4-FIX-5/6 GY - 3035982 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 VT - 3035979 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 BN - 3035981 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-FIX-5/6 WH - 3035983 4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch     Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Additional products 09/10/2019   Page 25 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UP 4/ 1 - 3060115 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 2 - 3060128 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 2, number of positions: 2, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 12.4 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 3 - 3060131 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 3, number of positions: 3, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 18.6 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 4 - 3060144 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 4, number of positions: 4, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 24.8 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 5 - 3060157 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 5, number of positions: 5, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 31 mm, height: 41.2 mm, color: gray     09/10/2019   Page 26 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UP 4/ 6 - 3060160 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 6, number of positions: 6, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 37.2 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 7 - 3060173 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 7, number of positions: 7, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 43.4 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 8 - 3060186 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 8, number of positions: 8, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 49.6 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 9 - 3060199 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 9, number of positions: 9, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 55.8 mm, height: 41.2 mm, color: gray     Plug - UP 4/10 - 3060209 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 10, number of positions: 10, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 62 mm, height: 41.2 mm, color: gray     09/10/2019   Page 27 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UP 4/11 - 3060212 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 11, number of positions: 11, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 68.2 mm, height: 41.2 mm, color: gray     Plug - UP 4/12 - 3060225 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 12, number of positions: 12, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 74.4 mm, height: 41.2 mm, color: gray     Plug - UP 4/13 - 3060238 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 13, number of positions: 13, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 80.6 mm, height: 41.2 mm, color: gray     Plug - UP 4/14 - 3060241 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 14, number of positions: 14, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 86.8 mm, height: 41.2 mm, color: gray     Plug - UP 4/15 - 3060254 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 15, number of positions: 15, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 93 mm, height: 41.2 mm, color: gray     09/10/2019   Page 28 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UP 4/ 1-L - 3060021 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 1-L BU - 3060034 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: blue     Plug - UP 4/ 1-L GNYE - 3060047 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: greenyellow     Plug - UP 4/ 1-M - 3060050 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 1-M BU - 3060063 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: blue     09/10/2019   Page 29 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UP 4/ 1-M GNYE - 3060076 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: greenyellow     Plug - UP 4/ 1-R - 3060089 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: gray     Plug - UP 4/ 1-R BU - 3060092 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: blue     Plug - UP 4/ 1-R GNYE - 3060102 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, height: 41.2 mm, color: greenyellow     Plug - UPBV 4/ 1 - 3045800 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: gray     09/10/2019   Page 30 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UPBV 4/ 2 - 3045813 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 2, number of positions: 2, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 12.4 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 3 - 3045826 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 3, number of positions: 3, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 18.6 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 4 - 3045839 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 4, number of positions: 4, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 24.8 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 5 - 3045842 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 5, number of positions: 5, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 31 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 6 - 3045855 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 6, number of positions: 6, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 37.2 mm, height: 48.5 mm, color: gray     09/10/2019   Page 31 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UPBV 4/ 7 - 3045868 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 7, number of positions: 7, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 43.4 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 8 - 3045871 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 8, number of positions: 8, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 49.6 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 9 - 3045884 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 9, number of positions: 9, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 55.8 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/10 - 3045897 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 10, number of positions: 10, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 62 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/11 - 3045907 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 11, number of positions: 11, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 68.2 mm, height: 48.5 mm, color: gray     09/10/2019   Page 32 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UPBV 4/12 - 3045910 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 12, number of positions: 12, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 74.4 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/13 - 3045923 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 13, number of positions: 13, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 80.6 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/14 - 3045936 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 14, number of positions: 14, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 86.8 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/15 - 3045949 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 15, number of positions: 15, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 93 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 1-L - 3045716 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: gray     09/10/2019   Page 33 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UPBV 4/ 1-L BU - 3045729 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: blue     Plug - UPBV 4/ 1-L GNYE - 3045732 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: greenyellow     Plug - UPBV 4/ 1-M - 3045745 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 1-M BU - 3045758 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: blue     Plug - UPBV 4/ 1-M GNYE - 3045761 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: greenyellow     09/10/2019   Page 34 / 35 https://www.phoenixcontact.com/us/products/3060296 Feed-through terminal block - UT 4-QUATTRO/ 2P - 3060296 Accessories Plug - UPBV 4/ 1-R - 3045774 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: gray     Plug - UPBV 4/ 1-R BU - 3045787 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: blue     Plug - UPBV 4/ 1-R GNYE - 3045790 Plug, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 1, number of positions: 1, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, width: 6.2 mm, height: 48.5 mm, color: greenyellow     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/10/2019   Page 35 / 35